Issues trying to update Garuda Linux

I’m getting the following Error Message when updating Garuda Linux

1). Dependency resolution failed:

perl<5.37 ← perl-io-interface: could not satisfy dependencies

2). File conflicts found:

rav1e (/usr/lib/librav1e.so.0.6): conflicting files

How can I resolve this?

garuda-inxi
System:
Kernel: 6.5.7-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=cf3b617e-2180-48eb-a038-87080de46510 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 5.27.8 tk: Qt v: 5.15.11 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: LENOVO product: 23243YU v: ThinkPad X230
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: LENOVO model: 23243YU serial: <superuser required>
UEFI-[Legacy]: LENOVO v: G2ETB7WW (2.77 ) date: 09/24/2019
Battery:
ID-1: BAT0 charge: 22.5 Wh (99.6%) condition: 22.6/86.6 Wh (26.1%)
power: 2.7 W volts: 12.6 min: 11.1 model: LGC 45N1029 type: Li-ion
serial: <filter> status: charging
CPU:
Info: model: Intel Core i7-3520M bits: 64 type: MT MCP arch: Ivy Bridge
gen: core 3 level: v2 built: 2012-15 process: Intel 22nm family: 6
model-id: 0x3A (58) stepping: 9 microcode: 0x21
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 1197 min/max: 1200/3600 scaling: driver: intel_cpufreq
governor: performance cores: 1: 1197 2: 1197 3: 1197 4: 1197 bogomips: 23146
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel 3rd Gen Core processor Graphics vendor: Lenovo driver: i915
v: kernel arch: Gen-7 process: Intel 22nm built: 2012-13 ports:
active: LVDS-1 empty: DP-1, DP-2, DP-3, HDMI-A-1, HDMI-A-2, HDMI-A-3,
VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0166 class-ID: 0300
Device-2: Chicony Integrated Camera [ThinkPad] driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 2-1.6:5
chip-ID: 04f2:b2ea class-ID: 0e02
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.2.1
compositor: kwin_x11 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: crocus gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
s-diag: 414mm (16.31")
Monitor-1: LVDS-1 model: LG Display 0x02d8 built: 2012 res: 1366x768
hz: 60 dpi: 125 gamma: 1.2 size: 277x156mm (10.91x6.14") diag: 318mm (12.5")
ratio: 16:9 modes: 1366x768
API: EGL v: 1.5 hw: drv: intel crocus platforms: device: 0 drv: crocus
device: 1 drv: swrast surfaceless: drv: crocus x11: drv: crocus
inactive: gbm,wayland
API: OpenGL v: 4.5 compat-v: 4.2 vendor: intel mesa v: 23.2.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 4000 (IVB
GT2) device-ID: 8086:0166 memory: 1.46 GiB unified: yes
API: Vulkan v: 1.3.264 layers: 3 device: 0 type: integrated-gpu name: Intel
HD Graphics 4000 (IVB GT2) driver: mesa intel v: 23.2.1-arch1.2
device-ID: 8086:0166 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
(LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.2.1-arch1.2 (LLVM
16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: Intel 7 Series/C216 Family High Definition Audio vendor: Lenovo 7
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1e20
class-ID: 0403
API: ALSA v: k6.5.7-zen2-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.83 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel 82579LM Gigabit Network vendor: Lenovo driver: e1000e
v: kernel port: 6080 bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Centrino Advanced-N 6205 [Taylor Peak] driver: iwlwifi
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0
chip-ID: 8086:0085 class-ID: 0280
IF: wlp3s0 state: down mac: <filter>
Device-3: Sierra Wireless Wireless Gobi 3000 Modem device (MC8355)
driver: qcserial,qmi_wwan type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
mode: 2.0 bus-ID: 3-4:2 chip-ID: 1199:9013 class-ID: 0000
IF: wwp0s20u4 state: down mac: <filter>
Bluetooth:
Device-1: Broadcom BCM20702 Bluetooth 4.0 [ThinkPad] driver: btusb v: 0.8
type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 2-1.4:4
chip-ID: 0a5c:21e6 class-ID: fe01 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 6 state: up address: <filter> bt-v: 4.0
lmp-v: 6 status: discoverable: no pairing: no class-ID: 7c010c
Drives:
Local Storage: total: 111.79 GiB used: 93.11 GiB (83.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SV300S37A120G
size: 111.79 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: BBF1 scheme: MBR
Partition:
ID-1: / raw-size: 111.79 GiB size: 111.79 GiB (100.00%)
used: 93.11 GiB (83.3%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 111.79 GiB size: 111.79 GiB (100.00%)
used: 93.11 GiB (83.3%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-3: /var/log raw-size: 111.79 GiB size: 111.79 GiB (100.00%)
used: 93.11 GiB (83.3%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-4: /var/tmp raw-size: 111.79 GiB size: 111.79 GiB (100.00%)
used: 93.11 GiB (83.3%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.33 GiB used: 5.54 GiB (36.2%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 69.0 C mobo: N/A
Fan Speeds (rpm): fan-1: 4231
Info:
Processes: 327 Uptime: 5d 3h 4m wakeups: 2 Memory: total: 16 GiB note: est.
available: 15.33 GiB used: 12.63 GiB (82.4%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1698
pm: pacman pkgs: 1696 libs: 429 tools: octopi,pamac,paru pm: rpm pkgs: 2
Shell: fish v: 3.6.1 default: Bash v: 5.1.16 running-in: yakuake
inxi: 3.3.30
error: could not register 'chaotic-aur' database (database already registered)
Garuda (2.6.17-1):
System install date:     2023-03-14
Last full system update: 2023-08-07
Is partially upgraded:   Yes
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       <superuser required>
Failed units:

Please, just post the full update log from terminal as text like
~~~
garuda-inxi
System:
Kernel: 5.18.15-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.1
parameters:
~~~

looks like

garuda-inxi
System:
  Kernel: 5.18.15-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.1
    parameters:

in forum.

I have edited your post.

1 Like

Please post the complete error messages.
The second one looks like this one.

The first one is unclear.
You could try to rebuild it with

paru perl-io-interface

Exit pkgbuild preview with button q then confirm installation.

This should be also fixed. Probably a duplicate entry like here:

Or a brute force :wink:

update remote fix
1 Like

those are the full error messages . I’ve tried the paru perl-io-interface command it still shows up with an error via the update.

Try

pacman -Syu --overwrite usr/lib/librav1e.so.0.6
1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.