Is it possible to configure the mouse to work with one click in Garuda Cinnamon?

Hello everyone!
I am new to linux and have fallen in love with Garuda Cinnamon, in fact it is my current and only OS on my laptop,
I was wondering if it is possible to configure the mouse to work with one click, like in the KDE desktop.
Thanks in advance for taking the trouble to read my post.

System:
  Kernel: 6.4.12-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=d8a1b9b9-6ce3-4fb3-bc25-77cd6d75d843 rw rootflags=subvol=@
    quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
    ibt=off
  Desktop: Cinnamon v: 5.8.4 tk: GTK v: 3.24.38 wm: muffin vt: 7 dm: LightDM
    v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: HP product: HP Laptop 15-bs1xx v: Type1ProductConfigId
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 832B v: 23.70 serial: <superuser required> UEFI: Insyde
    v: F.52 date: 03/04/2019
Battery:
  ID-1: BAT1 charge: 36.3 Wh (100.0%) condition: 36.3/41.6 Wh (87.3%)
    volts: 16.7 min: 14.6 model: Hewlett-Packard PABAS0241231 type: Li-ion
    serial: <filter> status: full
CPU:
  Info: model: Intel Core i5-8250U bits: 64 type: MT MCP arch: Coffee Lake
    gen: core 8 level: v3 note: check built: 2017 process: Intel 14nm family: 6
    model-id: 0x8E (142) stepping: 0xA (10) microcode: 0xF4
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 1800 min/max: 400/3400 scaling: driver: intel_pstate
    governor: performance cores: 1: 1800 2: 1800 3: 1800 4: 1800 5: 1800 6: 1800
    7: 1800 8: 1800 bogomips: 28800
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel UHD Graphics 620 vendor: Hewlett-Packard driver: i915
    v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports:
    active: eDP-1 empty: HDMI-A-1 bus-ID: 00:02.0 chip-ID: 8086:5917
    class-ID: 0300
  Device-2: AMD Topaz XT [Radeon R7 M260/M265 / M340/M360 M440/M445 530/535
    620/625 Mobile] vendor: Hewlett-Packard driver: amdgpu v: kernel
    arch: GCN-3 code: Volcanic Islands process: TSMC 28nm built: 2014-19 pcie:
    gen: 1 speed: 2.5 GT/s lanes: 4 link-max: gen: 3 speed: 8 GT/s lanes: 8
    bus-ID: 01:00.0 chip-ID: 1002:6900 class-ID: 0380 temp: 55.0 C
  Device-3: Sunplus Innovation HP TrueVision HD Camera driver: uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:5
    chip-ID: 1bcf:2c9b class-ID: 0e02
  Display: x11 server: X.Org v: 21.1.8 driver: X: loaded: amdgpu,modesetting
    alternate: fbdev,intel,vesa dri: iris,radeonsi gpu: i915 display-ID: :0
    screens: 1
  Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
    s-diag: 414mm (16.31")
  Monitor-1: eDP-1 model: BOE Display 0x06a4 built: 2015 res: 1366x768
    hz: 60 dpi: 101 gamma: 1.2 size: 344x194mm (13.54x7.64") diag: 395mm (15.5")
    ratio: 16:9 modes: 1366x768
  API: OpenGL v: 4.6 Mesa 23.1.6 renderer: Mesa Intel UHD Graphics 620 (KBL
    GT2) direct-render: Yes
Audio:
  Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_soc_avs
    bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
  API: ALSA v: k6.4.12-zen1-1-zen status: kernel-api with: aoss
    type: oss-emulator tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 0.3.78 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: 3000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: eno1 state: down mac: <filter>
  Device-2: Intel Wireless 7265 driver: iwlwifi v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 03:00.0 chip-ID: 8086:095a class-ID: 0280
  IF: wlo1 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-4:4 chip-ID: 8087:0a2a
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 4.2
    lmp-v: 8 status: discoverable: no pairing: no class-ID: 7c010c
Drives:
  Local Storage: total: 1.82 TiB used: 157.33 GiB (8.4%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
    model: WD10JPVX-60JC3T1 size: 931.51 GiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
    fw-rev: 1A02 scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: MQ01UBD100
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B type: USB
    rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: HDD rpm: 5400
    serial: <filter> scheme: MBR
Partition:
  ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 18.33 GiB (2.0%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 576 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 18.33 GiB (2.0%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 18.33 GiB (2.0%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 18.33 GiB (2.0%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.54 GiB used: 1.5 MiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 65.0 C pch: 55.5 C mobo: N/A gpu: amdgpu
    temp: 54.0 C
  Fan Speeds (rpm): N/A
Info:
  Processes: 307 Uptime: 2h 4m wakeups: 1 Memory: total: 16 GiB
  available: 15.54 GiB used: 3.08 GiB (19.8%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
  pm: pacman pkgs: 1529 libs: 500 tools: pamac,paru Shell: fish v: 3.6.1
  default: Bash v: 5.1.16 running-in: gnome-terminal inxi: 3.3.29
Garuda (2.6.16-1):
  System install date:     2023-08-25
  Last full system update: 2023-08-27 ↻
  Is partially upgraded:   No
  Relevant software:       timeshift(custom) NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:

Please, follow the template.

Please read the following template before requesting assistance:

Please post the terminal/konsole input and output as text (no pictures) from the the following command:

garuda-inxi

Refusing to post the output of the required "garuda-inxi" on a help request will likely result in you not receiving any help from the Garuda team. A failure to provide your system specs may also result in your thread being closed without notice, (as without this information providing assistance is often next to impossible).

Before opening a new help request, please search the Arch and Garuda Wiki's, and read any relevant sections related to your issue. Also, thoroughly search any error messages in the forum's search engine and on the web. For in depth information on how to search for answers to Linux issues effectively read the tips on the Garuda Wiki:

Please report in detail everything you have already attempted to solve your problem.

1 Like

I don’t use Cinnamon, but all hits seem to go to the same direction. E.g.
https://forums.linuxmint.com/viewtopic.php?t=330593

2 Likes

Oh Thank you!
It works perfectly, you are very kind to show it to me. :smile:

We always mark here the solution and not the implementation.

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.