Instilation network issues

I am attempting to install Garuda Linux Dragonized on a Mac, I am currently unable to connect to the internet to do the continue in the instillation, the network has 'no available connections' I have ran into similar issues with this before when attempting to install Linux based operating systems. I tried looking at other topics and could not find a fix. Help would be greatly appreciated.

Let me know if any data is needed, the output of [garuda-inxi] is below.

System:
Kernel: 5.18.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=garuda misolabel=GARUDA_DR460NIZED_TALON quiet
systemd.show_status=1 driver=nonfree nouveau.modeset=0 i915.modeset=1
radeon.modeset=1
Desktop: KDE Plasma v: 5.24.5 tk: Qt v: 5.15.4 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: Apple product: iMac14,1 v: 1.0
serial: <superuser required> Chassis: type: 13 v: Mac-031B6874CF7F642A
serial: <superuser required>
Mobo: Apple model: Mac-031B6874CF7F642A v: iMac14,1
serial: <superuser required> UEFI: Apple v: 433.120.6.0.0 date: 03/16/2022
CPU:
Info: model: Intel Core i5-4570R bits: 64 type: MCP arch: Haswell
gen: core 4 built: 2013-15 process: Intel 22nm family: 6
model-id: 0x46 (70) stepping: 1 microcode: 0x1C
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB L3: 4 MiB
desc: 1x4 MiB
Speed (MHz): avg: 2694 high: 2695 min/max: 800/3200 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 2694 2: 2694 3: 2694
4: 2695 bogomips: 21551
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf
mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: disabled, RSB filling
Type: srbds mitigation: Microcode
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: Intel vendor: Apple driver: i915 v: kernel ports: active: DP-3
empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2, VGA-1 bus-ID: 00:02.0
chip-ID: 8086:0d22 class-ID: 0300
Device-2: Apple FaceTime HD Camera (Built-in) type: USB driver: uvcvideo
bus-ID: 1-7:5 chip-ID: 05ac:8511 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.3 with: Xwayland v: 22.1.2
compositor: kwin_x11 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa gpu: i915 display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: DP-3 model: Apple iMac built: 2012 res: 1920x1080 hz: 60
dpi: 103 gamma: 1.2 size: 475x267mm (18.7x10.51") diag: 545mm (21.5")
ratio: 16:9 modes: max: 1920x1080 min: 960x540
OpenGL: renderer: Mesa Intel Iris Pro Graphics 5200 (HSW GT3)
v: 4.6 Mesa 22.1.1 direct render: Yes
Audio:
Device-1: Intel Crystal Well HD Audio vendor: Apple driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:0d0c class-ID: 0403
Device-2: Intel 8 Series/C220 Series High Definition Audio
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
class-ID: 0403
Sound Server-1: ALSA v: k5.18.3-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 16.0 running: no
Sound Server-3: PipeWire v: 0.3.52 running: yes
Network:
Device-1: Broadcom BCM4360 802.11ac Wireless Network Adapter vendor: Apple
driver: bcma-pci-bridge v: N/A modules: bcma pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 bus-ID: 02:00.0 chip-ID: 14e4:43a0 class-ID: 0280
Device-2: Broadcom NetXtreme BCM57766 Gigabit Ethernet PCIe driver: tg3
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: N/A bus-ID: 03:00.0
chip-ID: 14e4:1686 class-ID: 0200
IF: enp3s0f0 state: down mac: <filter>
Bluetooth:
Device-1: Apple Bluetooth USB Host Controller type: USB driver: btusb
v: 0.8 bus-ID: 1-8.3:9 chip-ID: 05ac:828d class-ID: fe01
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 1.37 TiB used: 0 KiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Apple model: HDD HTS541010A9E662
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: B5D0
scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 type: USB vendor: Generic model: Flash Disk
size: 3.83 GiB block-size: physical: 512 B logical: 512 B type: SSD
serial: <filter> rev: 8.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
ID-3: /dev/sdc maj-min: 8:32 type: USB vendor: Hitachi model: G ST
size: 465.76 GiB block-size: physical: 512 B logical: 512 B type: N/A
serial: <filter> rev: 0000 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.7 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 66.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 181 Uptime: 12m wakeups: 0 Memory: 7.7 GiB
used: 1.87 GiB (24.2%) Init: systemd v: 251 default: graphical
tool: systemctl Compilers: gcc: 12.1.0 Packages: pacman: 1181 lib: 302
Shell: fish v: 3.4.1 default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.17
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)
warning: database file for 'community' does not exist (use '-Sy' to download)
warning: database file for 'multilib' does not exist (use '-Sy' to download)
warning: database file for 'chaotic-aur' does not exist (use '-Sy' to download)
Garuda (2.6.3-2):
System install date:     2022-07-02
Last full system update: 2022-07-02 ↻
Is partially upgraded:   No
Relevant software:       NetworkManager
Windows dual boot:       <superuser required>
Snapshots:               Snapper
Failed units:            snapper-cleanup.service

Welcome :slight_smile:
On KDE updates, best is to reboot first.

1 Like

I rebooted, same issue. It also hasten been installed yet because I cannot connect to the network to do so.

You don't need the internet for the installation.
Complete the process, reboot and let's see if connectivity is fixed.
If not, we'll search for the right driver for your card.
E.g.

3 Likes

that fixed it, thanks m8. Also sorry, I thought it was a net install for some reason.

2 Likes

My english is getting worse day by day :frowning:

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.