Good morning,
this is my Garuda-inxi
garuda-inxi
System:
Kernel: 6.6.4-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=fde666f2-211a-45b9-8a15-5272ef27f8bf rw rootflags=subvol=@
quiet resume=UUID=094d9aae-ef8e-41fb-b4ac-c3cea0e36928 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.11 wm: kwin_wayland vt: 1
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: Dell product: Precision 7530 v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Dell model: 03RV2M v: A00 serial: <superuser required> UEFI: Dell
v: 1.24.0 date: 07/13/2022
Battery:
ID-1: BAT0 charge: 38.7 Wh (44.5%) condition: 86.9/97.0 Wh (89.6%)
volts: 11.1 min: 11.4 model: SMP DELL 0WMRC7B type: Li-ion serial: <filter>
status: discharging
CPU:
Info: model: Intel Core i7-8750H bits: 64 type: MT MCP arch: Coffee Lake
gen: core 8 level: v3 note: check built: 2018 process: Intel 14nm family: 6
model-id: 0x9E (158) stepping: 0xA (10) microcode: 0xF4
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB desc: 6x256 KiB
L3: 9 MiB desc: 1x9 MiB
Speed (MHz): avg: 800 min/max: 800/4100 scaling: driver: intel_pstate
governor: powersave cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
8: 800 9: 800 10: 800 11: 800 12: 800 bogomips: 52799
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630] vendor: Dell
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-4, DP-5, DP-6, HDMI-A-2 bus-ID: 00:02.0
chip-ID: 8086:3e9b class-ID: 0300
Device-2: NVIDIA GP107GLM [Quadro P1000 Mobile] vendor: Dell
driver: nvidia v: 545.29.06 alternate: nouveau,nvidia_drm non-free: 545.xx+
status: current (as of 2023-10; EOL~2026-12-xx) arch: Pascal code: GP10x
process: TSMC 16nm built: 2016-2021 pcie: gen: 1 speed: 2.5 GT/s lanes: 16
link-max: gen: 3 speed: 8 GT/s ports: active: none empty: DP-1, DP-2,
DP-3, HDMI-A-1 bus-ID: 01:00.0 chip-ID: 10de:1cbb class-ID: 0300
Device-3: Microdia Integrated_Webcam_HD driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-11:3
chip-ID: 0c45:6717 class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.9 with: Xwayland v: 23.2.2
compositor: kwin_wayland driver: X: loaded: modesetting,nvidia
unloaded: nouveau alternate: fbdev,intel,nv,vesa dri: iris
gpu: i915,nvidia display-ID: 0
Monitor-1: eDP-1 res: 1536x864 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
drv: nvidia device: 1 drv: iris device: 3 drv: swrast gbm: drv: nvidia
surfaceless: drv: nvidia wayland: drv: iris x11: drv: iris
inactive: device-2
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 23.2.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: Mesa Intel UHD Graphics 630 (CFL
GT2) device-ID: 8086:3e9b memory: 30.38 GiB unified: yes display-ID: :1.0
API: Vulkan v: 1.3.269 layers: 14 device: 0 type: integrated-gpu
name: Intel UHD Graphics 630 (CFL GT2) driver: mesa intel v: 23.2.1-arch1.2
device-ID: 8086:3e9b surfaces: xcb,xlib,wayland device: 1
type: discrete-gpu name: Quadro P1000 driver: nvidia v: 545.29.06
device-ID: 10de:1cbb surfaces: xcb,xlib,wayland device: 2 type: cpu
name: llvmpipe (LLVM 16.0.6 256 bits) driver: mesa llvmpipe
v: 23.2.1-arch1.2 (LLVM 16.0.6) device-ID: 10005:0000
surfaces: xcb,xlib,wayland
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Dell driver: snd_hda_intel
v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA GP107GL High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:0fb9 class-ID: 0403
API: ALSA v: k6.6.4-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: kernel
port: N/A bus-ID: 00:1f.6 chip-ID: 8086:15bb class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Intel Wireless-AC 9260 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 70:00.0 chip-ID: 8086:2526 class-ID: 0280
IF: wlp112s0 state: up mac: <filter>
IF-ID-1: tun0 state: unknown speed: 10000 Mbps duplex: full mac: N/A
Bluetooth:
Device-1: Intel Wireless-AC 9260 Bluetooth Adapter driver: btusb v: 0.8
type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:4
chip-ID: 8087:0025 class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 5.1
lmp-v: 10 status: discoverable: no pairing: no class-ID: 7c010c
Drives:
Local Storage: total: 1.83 TiB used: 271.71 GiB (14.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:8 vendor: Crucial model: CT1000P3SSD8
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: P9CR30A temp: 34.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Lenovo
model: LENSE30512GMSP34MEAT3TA size: 476.94 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 1.4.0412 temp: 50.9 C scheme: GPT
ID-3: /dev/nvme2n1 maj-min: 259:6 vendor: Crucial model: CT500P3SSD8
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: P9CR30A temp: 47.9 C
scheme: MBR
Partition:
ID-1: / raw-size: 897 GiB size: 897 GiB (100.00%) used: 271.71 GiB (30.3%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:10
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 588 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:9
ID-3: /home raw-size: 897 GiB size: 897 GiB (100.00%)
used: 271.71 GiB (30.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:10
ID-4: /var/log raw-size: 897 GiB size: 897 GiB (100.00%)
used: 271.71 GiB (30.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:10
ID-5: /var/tmp raw-size: 897 GiB size: 897 GiB (100.00%)
used: 271.71 GiB (30.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:10
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.11 GiB used: 1.8 MiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
ID-2: swap-2 type: partition size: 34.22 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:11
Sensors:
System Temperatures: cpu: 40.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 302 Uptime: 2h 5m wakeups: 0 Memory: total: 32 GiB
available: 31.11 GiB used: 5.53 GiB (17.8%) Init: systemd v: 255
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
pm: pacman pkgs: 1869 libs: 561 tools: octopi,paru Shell: fish v: 3.6.2
running-in: konsole inxi: 3.3.31
Garuda (2.6.19-2):
System install date: 2023-12-05
Last full system update: 2023-12-11
Is partially upgraded: Yes
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: Probably (Run as root to verify)
Failed units:
i am trying to install Seclists:
stefano@stefano in repo: seclists on master [!] took 30ms
╰─λ makepkg --install
==> WARNING: A package has already been built, installing existing package...
==> Installing package seclists with pacman -U...
[sudo] password for stefano:
loading packages...
warning: seclists-2023.4-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Package (1) Old Version New Version Net Change
seclists 2023.4-1 2023.4-1 0,00 MiB
Total Installed Size: 2053,73 MiB
Net Upgrade Size: 0,00 MiB
:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring [------------------------------------------------] 100%
(1/1) checking package integrity [------------------------------------------------] 100%
(1/1) loading package files [------------------------------------------------] 100%
(1/1) checking for file conflicts [------------------------------------------------] 100%
(1/1) checking available disk space [------------------------------------------------] 100%
:: Running pre-transaction hooks...
(1/1) Performing snapper pre snapshots for the following configurations...
==> root: 57
:: Processing package changes...
(1/1) reinstalling seclists [------------------------------------------------] 100%
:: Running post-transaction hooks...
(1/6) Arming ConditionNeedsUpdate...
(2/6) Foreign/AUR package notification
blackarch-keyring 20140118-3
gobuster 3.6.0-1
seclists 2023.4-1
(3/6) Orphaned package notification...
kdsoap-ws-discovery-client 0.3.0-2
libinput-gestures-qt 0.4-1
nvm 0.39.7-1
wayland-protocols 1.32-1
(4/6) Checking for .pacnew and .pacsave files...
(5/6) Performing snapper post snapshots for the following configurations...
==> root: 58
(6/6) Syncing all file systems...
and in the terminal it says that it is install but when I digit the command “seclists” I got this:
─stefano@stefano in ~/Downloads via v3.11.6 took 2s
╰─λ seclists
find-the-command: "seclists" is not found locally, searching in repositories...
find-the-command: command not found: "seclists"
does somebody knows what may be the issues? what am I doing wrong?
Thank you for your help and support