# garuda-inxi
System:
Kernel: 5.15.86-1-lts arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=6e19e005-ffb3-45de-85ac-f443fa521069 rw rootflags=subvol=@
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3 ibt=off
Desktop: Xfce v: 4.18.0 tk: Gtk v: 3.24.35 info: xfce4-panel wm: xfwm
v: 4.18.0 vt: 7 dm: LightDM v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B450M DS3H V2 v: x.x serial: N/A
BIOS: American Megatrends LLC. v: F62 date: 01/27/2022
CPU:
Info: model: AMD Ryzen 3 3200G with Radeon Vega Graphics socket: AM4
bits: 64 type: MCP arch: Zen/Zen+ note: check gen: 1 level: v3 note: check
built: 2019 process: GF 12nm family: 0x17 (23) model-id: 0x18 (24)
stepping: 1 microcode: 0x8108109
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 384 KiB
desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
desc: 1x4 MiB
Speed (MHz): avg: 1400 min/max: 1400/3600 boost: enabled
base/boost: 3600/4000 scaling: driver: acpi-cpufreq governor: schedutil
volts: 1.4 V ext-clock: 100 MHz cores: 1: 1400 2: 1400 3: 1400 4: 1400
bogomips: 28746
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed mitigation: untrained return thunk; SMT disabled
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, STIBP:
disabled, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Picasso/Raven 2 [Radeon Vega Series / Radeon Mobile Series]
vendor: Gigabyte driver: amdgpu v: kernel arch: GCN-5 code: Vega
process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
ports: active: HDMI-A-1 empty: DVI-D-1 bus-ID: 06:00.0 chip-ID: 1002:15d8
class-ID: 0300 temp: 33.0 C
Device-2: Microdia Integrated Camera type: USB driver: uvcvideo
bus-ID: 3-2:2 chip-ID: 0c45:64ab class-ID: 0e02
Display: x11 server: X.Org v: 21.1.6 compositor: xfwm v: 4.18.0 driver: X:
loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: :0.0 screens: 1
Screen-1: 0 s-res: 1280x1024 s-dpi: 96 s-size: 339x271mm (13.35x10.67")
s-diag: 434mm (17.09")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: Acer 0x0019 serial: <filter>
built: 2009 res: 1280x1024 hz: 75 dpi: 8 gamma: 1.2
size: 4095x4095mm (161.22x161.22") diag: 434mm (17.1") ratio: 5:4, 4:3
modes: max: 720x480 min: 720x400
API: OpenGL Message: Unable to show GL data. Required tool glxinfo
missing.
Audio:
Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 06:00.1
chip-ID: 1002:15de class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
Sound API: ALSA v: k5.15.86-1-lts running: yes
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.63 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.82 TiB used: 79.87 GiB (4.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000VN002-2EY102
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5900 serial: <filter> rev: SC60 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: HDWD110
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: A8R0 scheme: MBR
Partition:
ID-1: / raw-size: 100 GiB size: 100 GiB (100.00%) used: 10.85 GiB (10.9%)
fs: btrfs block-size: 4096 B dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 500 MiB size: 499 MiB (99.80%)
used: 608 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/sdb3 maj-min: 8:19
ID-3: /home raw-size: 100 GiB size: 100 GiB (100.00%)
used: 10.85 GiB (10.9%) fs: btrfs block-size: 4096 B dev: /dev/sdb2
maj-min: 8:18
ID-4: /var/log raw-size: 100 GiB size: 100 GiB (100.00%)
used: 10.85 GiB (10.9%) fs: btrfs block-size: 4096 B dev: /dev/sdb2
maj-min: 8:18
ID-5: /var/tmp raw-size: 100 GiB size: 100 GiB (100.00%)
used: 10.85 GiB (10.9%) fs: btrfs block-size: 4096 B dev: /dev/sdb2
maj-min: 8:18
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 5.71 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 32.9 C mobo: N/A gpu: amdgpu temp: 32.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 268 Uptime: 1h 18m wakeups: 0 Memory: 5.71 GiB
used: 1.93 GiB (33.7%) Init: systemd v: 252 default: graphical
tool: systemctl Compilers: gcc: 12.2.0 Packages: pm: pacman pkgs: 1350
libs: 368 tools: paru pm: rpm pkgs: 0 Shell: Bash v: 5.1.16
running-in: xfce4-terminal inxi: 3.3.24
Garuda (2.6.12-1):
System install date: 2023-01-01
Last full system update: 2023-01-03 ↻
Is partially upgraded: No
Relevant software: NetworkManager
Windows dual boot: No/Undetected
Snapshots: Snapper
Failed units:
When I invoke rpm...
# rpm -i ./pal-0.4.2-lp150.10.1.x86_64.rpm
warning: ./pal-0.4.2-lp150.10.1.x86_64.rpm: Header V3 RSA/SHA256 Signature, key ID 23312922: NOKEY
error: Failed dependencies:
/usr/bin/awk is needed by pal-0.4.2-lp150.10.1.x86_64
libc.so.6()(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libc.so.6(GLIBC_2.3.4)(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libc.so.6(GLIBC_2.4)(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libc.so.6(GLIBC_2.7)(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libglib-2.0.so.0()(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libncurses.so.6()(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libncurses.so.6(NCURSEST6_5.7.20081102)(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libreadline.so.7()(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libtinfo.so.6()(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libtinfo.so.6(NCURSES6_TINFO_5.0.19991023)(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
libtinfo.so.6(NCURSES6_TINFO_5.7.20081102)(64bit) is needed by pal-0.4.2-lp150.10.1.x86_64
[root@ion-office PAL]#
...I get a lot of failed dependencies. Is there a way to install them collectively, so I don't have to do it individually?