Input like internal microphone is not detected

Issues & Assistance Unsupported hardware | Dual boot
1

Mod edit: My input is not dected like internal microphone is not detected i was on garuda then i tried every dirsto but nothing fixed.

Pls help me now i am on fedora even this too not working why i am requesting because i used garuda linux has my first linux and it is my fav all of the time

╭─garuda@garuda in ~ as 🧙 
 ╰─λ garuda-inxi 
System:
  Kernel: 6.8.7-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc avail: acpi_pm parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64
    lang=en_US keytable=us tz=UTC misobasedir=garuda
    root=miso:LABEL=GARUDA_HYPRLAND_BIRDOFPREY quiet systemd.show_status=1
    checksum=y driver=nonfree nouveau.modeset=0 i915.modeset=1
    radeon.modeset=1
  Desktop: Hyprland v: 0.39.1 with: waybar tools: avail: swayidle,swaylock
    vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Laptop System: HP product: Victus by HP Gaming Laptop 15-fb1xxx v: N/A
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: HP model: 8C30 v: 88.14 serial: <superuser required>
    part-nu: 8L083PA#ACJ uuid: <superuser required> UEFI: AMI v: F.03
    date: 08/10/2023
Battery:
  ID-1: BAT0 charge: 50.3 Wh (100.0%) condition: 50.3/50.3 Wh (100.0%)
    volts: 13.1 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
    status: full cycles: 210
CPU:
  Info: model: AMD Ryzen 5 7535HS with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen 3+ gen: 4 level: v3 note: check built: 2022 process: TSMC n6 (7nm)
    family: 0x19 (25) model-id: 0x44 (68) stepping: 1 microcode: 0xA404102
  Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
    L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 567 high: 1407 min/max: 400/4603 scaling:
    driver: amd-pstate-epp governor: powersave cores: 1: 1397 2: 400 3: 400
    4: 1407 5: 400 6: 400 7: 400 8: 400 9: 400 10: 400 11: 400 12: 400
    bogomips: 79059
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: NVIDIA GA107 [GeForce RTX 2050] vendor: Hewlett-Packard
    driver: nvidia v: 550.76 alternate: nouveau,nvidia_drm non-free: 550.xx+
    status: current (as of 2024-04; EOL~2026-12-xx) arch: Turing code: TUxxx
    process: TSMC 12nm FF built: 2018-2022 pcie: gen: 4 speed: 16 GT/s
    lanes: 8 link-max: lanes: 16 ports: active: none empty: HDMI-A-1
    bus-ID: 01:00.0 chip-ID: 10de:25ad class-ID: 0300
  Device-2: AMD Rembrandt [Radeon 680M] vendor: Hewlett-Packard
    driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm)
    built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: eDP-1
    empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6, DP-7, DP-8, Writeback-1
    bus-ID: 06:00.0 chip-ID: 1002:1681 class-ID: 0300 temp: 55.0 C
  Device-3: Chicony HP Wide Vision HD Camera driver: uvcvideo type: USB
    rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-3:2 chip-ID: 04f2:b766
    class-ID: 0e02 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 23.2.6
    compositor: Hyprland v: 0.39.1 driver: X: loaded: amdgpu,nvidia
    unloaded: modesetting,nouveau alternate: fbdev,nv,vesa dri: radeonsi
    gpu: amdgpu display-ID: 1
  Monitor-1: eDP-1 model: BOE Display 0x094d built: 2020 res: 1920x1080
    hz: 144 dpi: 142 gamma: 1.2 scale: 1 size: 344x194mm (13.54x7.64")
    diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: Vulkan v: 1.3.279 layers: 5 device: 0 type: integrated-gpu name: AMD
    Radeon Graphics (RADV REMBRANDT) driver: mesa radv v: 24.0.5-arch1.1
    device-ID: 1002:1681 surfaces: xcb,xlib,wayland device: 1
    type: discrete-gpu name: NVIDIA GeForce RTX 2050 driver: nvidia v: 550.76
    device-ID: 10de:25ad surfaces: xcb,xlib,wayland device: 2 type: cpu
    name: llvmpipe (LLVM 17.0.6 256 bits) driver: mesa llvmpipe
    v: 24.0.5-arch1.1 (LLVM 17.0.6) device-ID: 10005:0000
    surfaces: xcb,xlib,wayland
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: NVIDIA vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
    pcie: gen: 4 speed: 16 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 01:00.1
    chip-ID: 10de:2291 class-ID: 0403
  Device-2: AMD Rembrandt Radeon High Definition Audio
    vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 4
    speed: 16 GT/s lanes: 16 bus-ID: 06:00.1 chip-ID: 1002:1640 class-ID: 0403
  Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
    driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x,
    snd_pci_acp5x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
    snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
    snd_sof_amd_acp63 pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 06:00.5
    chip-ID: 1022:15e2 class-ID: 0480
  Device-4: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.8.7-zen1-2-zen status: kernel-api tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
  IF: eno1 state: down mac: <filter>
  Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter
    vendor: AzureWave driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s
    lanes: 1 bus-ID: 03:00.0 chip-ID: 14c3:7961 class-ID: 0280
  IF: wlo1 state: up mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB
    rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4:3 chip-ID: 13d3:3567
    class-ID: e001 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 5.2
    lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
  Local Storage: total: 505.61 GiB used: 0 KiB (0.0%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: WD PC
    SN810 SDCPNRY-512G-1006 size: 476.94 GiB block-size: physical: 512 B
    logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: HPS2 temp: 44.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: SanDisk model: Cruzer Blade
    size: 28.67 GiB block-size: physical: 512 B logical: 512 B type: USB
    rev: 2.0 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
    fw-rev: 1.00 scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
  Message: No partition data found.
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 6.97 GiB used: 5 MiB (0.1%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 68.2 C mobo: 42.0 C gpu: amdgpu temp: 57.0 C
  Fan Speeds (rpm): fan-1: 3189 fan-2: 2705
Info:
  Memory: total: 8 GiB note: est. available: 6.97 GiB used: 3.22 GiB (46.2%)
  Processes: 305 Power: uptime: 4m states: freeze,mem,disk suspend: s2idle
    wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume
    image: 2.75 GiB Init: systemd v: 255 default: graphical tool: systemctl
  Packages: pm: pacman pkgs: 1316 libs: 380 tools: pacseek,paru Compilers:
    gcc: 13.2.1 Shell: garuda-inxi default: fish v: 3.7.1 running-in: foot
    inxi: 3.3.34
warning: database file for 'garuda' does not exist (use '-Sy' to download)
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)
warning: database file for 'community' does not exist (use '-Sy' to download)
warning: database file for 'multilib' does not exist (use '-Sy' to download)
warning: database file for 'chaotic-aur' does not exist (use '-Sy' to download)
Garuda (2.6.26-1):
  System install date:     2025-02-18
  Last full system update: 2025-02-18 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut nvidia-dkms
  Windows dual boot:       <superuser required>
  Failed units:            
McFly: Importing shell history for the first time. This may take a minute or two...done.
2

but it works fine on windows

3

Welcome to the forum @mafiatamilan.

Please post your garuda-inxi as requested by the template.
If you don’t have Garuda Linux installed at the moment, then boot a garuda live.iso and post your garuda-inxi from there.

It does not make sense to write everything in the topic title - please use the start post for that. I have fixed it for you.
It is also helpful to describe the problem in detail and to post possible error messages.

6 Likes
4

brother i am sorry now i am on fedora please tell me

5

Please try to write sensibly, this is not a ghetto but a support forum for Garuda Linux.

If you plan to install Garuda Linux, then boot a garuda live.iso and post your garuda-inxi from there.
This will give us an overview of your system and especially of the hardware you have installed, such as your non-functioning microphone. Since you obviously have the same issue with every distro, your hardware (unknown to us) is probably not Linux compatible.

If you do not use Garuda Linux or do not post your garuda-inxi, you will hardly get any help here.

This is not a general technical support forum, and in that case this topic will be closed.

Edit: @mafiatamilan
The hardware is basically linux compatible, including the sound chip.
The first thing you should do is a BIOS update:

After a BIOS update, the factory defaults are loaded, so you have to change the settings again.

Basically the following applies:
BIOS = UEFI-only mode
Secure Boot = disabled
Fastboot = disabled
AHCI = enabled
And check possible settings to allow booting from external usb drives.

Since you have windows dual boot, boot windows and disable Faststart and Hibernate in the power settings. Then shut down windows correctly, either by right-clicking on the start menu → shutdown or Shift + shutdown. Anything else is not a real reboot/shutdown. Windows hijacks hardware if it has not been shut down correctly, this is then not available under linux or does not work properly.

If none of this helps and you still can’t run Garuda Linux or other linux distros without issues, then something on the laptop is not linux compatible.

4 Likes
6
  1. Fedora is not part of Garuda Forum
  2. Always Check your inputs (change between them), Change type of your input.
  3. If it’s working on “Win” it should work Linux via Alsamixer, Alsa, Pulse

From your inxi i can clearly see it’s detecting the hardver, but you should check them manually to switch between sources.

Waiting for your feedback. Good Luck!

7

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.