System:
Kernel: 6.2.13-zen-1-zen arch: x86_64 bits: 64
compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=5367a75c-10cd-4acc-8034-f614345be3b1 rw
rootflags=subvol=@ quiet quiet splash
rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=ede8ea6b-f5db-4414-96e9-61f9a4cfafc4
loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux
base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: N68-VS3 FX
serial: <superuser required> BIOS: American Megatrends
v: P1.80 date: 10/31/2012
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse
serial: <filter> charge: 55% (should be ignored)
rechargeable: yes status: discharging
Device-2: hidpp_battery_1 model: Logitech Wireless
Keyboard serial: <filter>
charge: 55% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: AMD FX-6300 bits: 64 type: MT MCP
arch: Piledriver level: v2 built: 2012-13
process: GF 32nm family: 0x15 (21) model-id: 2
stepping: 0 microcode: 0x6000852
Topology: cpus: 1x cores: 6 smt: enabled cache:
L1: 288 KiB desc: d-6x16 KiB; i-3x64 KiB L2: 6 MiB
desc: 3x2 MiB L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 3817 high: 3822 min/max: 1400/3500
boost: enabled scaling: driver: acpi-cpufreq
governor: performance cores: 1: 3822 2: 3817 3: 3817
4: 3817 5: 3817 6: 3815 bogomips: 42192
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2
sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GM107 [GeForce GTX 750]
vendor: Micro-Star MSI driver: nouveau v: kernel
non-free: 530.xx+ status: current (as of 2023-03)
arch: Maxwell code: GMxxx process: TSMC 28nm
built: 2014-19 pcie: gen: 1 speed: 2.5 GT/s lanes: 16
ports: active: VGA-1 empty: DVI-D-1,HDMI-A-1
bus-ID: 02:00.0 chip-ID: 10de:1381 class-ID: 0300
temp: 32.0 C
Display: x11 server: X.Org v: 21.1.8 with: Xwayland
v: 23.1.1 compositor: kwin_x11 driver: X:
loaded: nouveau unloaded: modesetting
alternate: fbdev,nv,vesa dri: nouveau gpu: nouveau
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96
s-size: 361x203mm (14.21x7.99") s-diag: 414mm (16.31")
Monitor-1: VGA-1 model: Samsung S19C150
serial: <filter> built: 2013 res: 1366x768 hz: 60
dpi: 85 gamma: 1.2 size: 410x230mm (16.14x9.06")
diag: 470mm (18.5") ratio: 16:9 modes: max: 1366x768
min: 720x400
API: OpenGL v: 4.3 Mesa 23.0.3 renderer: NV117
direct-render: Yes
Audio:
Device-1: NVIDIA MCP61 High Definition Audio
vendor: ASRock driver: snd_hda_intel v: kernel
bus-ID: 00:05.0 chip-ID: 10de:03f0 class-ID: 0403
Device-2: NVIDIA GM107 High Definition Audio [GeForce
940MX] vendor: Micro-Star MSI driver: snd_hda_intel
v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16
bus-ID: 02:00.1 chip-ID: 10de:0fbc class-ID: 0403
API: ALSA v: k6.2.13-zen-1-zen status: kernel-api
with: aoss type: oss-emulator tools: N/A
Server-1: PipeWire v: 0.3.70 status: active with:
1: pipewire-pulse status: active 2: wireplumber
status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: NVIDIA MCP61 Ethernet vendor: ASRock
939NF6G-VSTA Board type: network bridge
driver: forcedeth v: kernel port: d080 bus-ID: 00:07.0
chip-ID: 10de:03ef class-ID: 0680
IF: enp0s7 state: down mac: <filter>
IF-ID-1: enp0s2f1u3 state: unknown speed: -1
duplex: half mac: <filter>
Bluetooth:
Device-1: Samsung Galaxy series misc. (tethering mode)
type: USB driver: rndis_host v: kernel bus-ID: 1-3:15
chip-ID: 04e8:6863 class-ID: 0a00 serial: <filter>
Report: bt-service: enabled,stopped
note: tool can't run
Drives:
Local Storage: total: 596.18 GiB
used: 167.74 GiB (28.1%)
SMART Message: Unable to run smartctl. Root
privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingston
model: SA400S37480G size: 447.13 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s
type: SSD serial: <filter> rev: 66.5 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Hitachi
model: HDT721016SLA380 size: 149.05 GiB block-size:
physical: 512 B logical: 512 B speed: 3.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: A31B
scheme: MBR
Partition:
ID-1: / raw-size: 438.33 GiB size: 438.33 GiB (100.00%)
used: 61.69 GiB (14.1%) fs: btrfs dev: /dev/sda1
maj-min: 8:1
ID-2: /home raw-size: 438.33 GiB
size: 438.33 GiB (100.00%) used: 61.69 GiB (14.1%)
fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-3: /var/log raw-size: 438.33 GiB
size: 438.33 GiB (100.00%) used: 61.69 GiB (14.1%)
fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-4: /var/tmp raw-size: 438.33 GiB
size: 438.33 GiB (100.00%) used: 61.69 GiB (14.1%)
fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 133 (default 60)
cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.76 GiB
used: 388 MiB (4.9%) priority: 100 dev: /dev/zram0
ID-2: swap-2 type: partition size: 8.8 GiB
used: 0 KiB (0.0%) priority: -2 dev: /dev/sda2
maj-min: 8:2
Sensors:
System Temperatures: cpu: 48.6 C mobo: N/A gpu: nouveau
temp: 32.0 C
Fan Speeds (RPM): N/A gpu: nouveau fan: 900
Info:
Processes: 228 Uptime: 2h 31m wakeups: 26
Memory: 7.76 GiB used: 2.09 GiB (26.9%) Init: systemd
v: 253 default: graphical tool: systemctl Compilers:
gcc: 12.2.1 Packages: pm: pacman pkgs: 1783 libs: 517
tools: octopi,paru Shell: fish v: 3.6.1 default: Bash
v: 5.1.16 running-in: konsole inxi: 3.3.26
Garuda (2.6.16-1):
System install date: 2023-06-07
Last full system update: 2023-06-07
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: <superuser required>
Failed units:
im trying garuda to see if it helps my old machine run a little faster
the initial update fails, firstly when updating from the setup assistant i get a mangohud problem which i was able to bypass using this thread:
then when it checks for file integrity, it founds a damaged package python_pynput and i wasnt able to solve it, this is the console output;
error: python-pynput: la firma de «Nico Jensch (Chaotic-AUR) <[email protected]>» no es válida
:: El archivo /var/cache/pacman/pkg/python-pynput-1.7.6-2.3-any.pkg.tar.zst está dañado (paquete no válido o dañado (firma PGP)).
¿Quiere eliminarlo? [S/n] s
error: no se pudo realizar la operación (paquete no válido o dañado)
Ocurrieron errores, por lo que no se actualizarán los paquetes
what can i do to fix this
also since im here; can you give me the entries to enable the nvidia drivers?
thanks in advance