Smurg
4 October 2023 08:30
1
So after copying my install to a new larger drive i moved my swap partition with Gparted so i could enlarge my root Partition and now it doesn’t work, would deleting the partition and remaking it with KDE Partition manager fix it?
[e[0;1;31mFAILEDe[0m] Failed to activate swap e[0;1;39m/dev/disk/by-uuid/29f15791-f1dd-436f-902e-804af7e61bb0e[0m.
[e[0;1;38;5;185mDEPENDe[0m] Dependency failed for e[0;1;39mSwapse[0m.
[e[0;1;31mFAILEDe[0m] Failed to start e[0;1;39mVirtual Console Setupe[0m.
[e[0;1;31mFAILEDe[0m] Failed to activate swap e[0;1;39m/dev/disk/by-uuid/29f15791-f1dd-436f-902e-804af7e61bb0e[0m.
[e[0;1;38;5;185mDEPENDe[0m] Dependency failed for e[0;1;39mSwapse[0m.
SGS
4 October 2023 09:39
2
Check your /etc/fstab, the UUID has probably changed.
4 Likes
Smurg
5 October 2023 11:46
3
i changed the uuid to the new id and it just made the boot take much longer.
SGS
5 October 2023 12:18
4
Then you did something wrong.
1 Like
filo
5 October 2023 12:19
5
Reboot again and provide
garuda-inxi
systemd-analyze
systemd-analyze critical-chain
2 Likes
Smurg
6 October 2023 06:51
6
here is the info you asked for, also I have tried both the UUID and the Partition UUID in fstab the Partition UUID only made it take longer to boot.
garuda-inxi
systemd-analyze
systemd-analyze critical-chain
System:
Kernel: 6.5.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=f343e266-2bba-4823-826a-311cb6319709 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=29f15791-f1dd-436f-902e-804af7e61bb0 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.8 tk: Qt v: 5.15.10 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B650M AORUS ELITE
serial: <superuser required> UEFI: American Megatrends LLC. v: F8c
date: 08/16/2023
CPU:
Info: model: AMD Ryzen 5 7600X bits: 64 type: MT MCP arch: Zen 4 gen: 5
level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
model-id: 0x61 (97) stepping: 2 microcode: 0xA601203
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 6 MiB desc: 6x1024 KiB
L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 4540 high: 5439 min/max: 400/5453 scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 4350 2: 4349 3: 3346
4: 4346 5: 5438 6: 5431 7: 4349 8: 4346 9: 3302 10: 4349 11: 5439 12: 5438
bogomips: 112583
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
vendor: ASUSTeK driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: DP-2,HDMI-A-1 off: DP-3 empty: DP-1
bus-ID: 03:00.0 chip-ID: 1002:73df class-ID: 0300
Device-2: AMD Raphael vendor: Gigabyte driver: amdgpu v: kernel
arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: none empty: DP-4, DP-5,
DP-6, HDMI-A-2 bus-ID: 12:00.0 chip-ID: 1002:164e class-ID: 0300
temp: 40.0 C
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.2.0
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting,radeon
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1013x285mm (39.88x11.22")
s-diag: 1052mm (41.43")
Monitor-1: DP-2 mapped: DisplayPort-1 pos: primary,right
model: ViewSonic XG2401 SERIES serial: <filter> built: 2016 res: 1920x1080
dpi: 92 gamma: 1.2 size: 531x299mm (20.91x11.77") diag: 609mm (24")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-2: DP-3 mapped: DisplayPort-2 note: disabled model: Samsung
built: 2010 res: 1920x1080 dpi: 55 gamma: 1.2 size: 160x90mm (6.3x3.54")
diag: 1021mm (40.2") ratio: 16:9 modes: max: 1920x1080 min: 720x400
Monitor-3: HDMI-A-1 mapped: HDMI-A-0 pos: left model: Philips PHL 243V5
serial: <filter> built: 2018 res: 1920x1080 hz: 60 dpi: 94 gamma: 1.2
size: 521x293mm (20.51x11.54") diag: 598mm (23.5") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: OpenGL v: 4.6 Mesa 23.1.7-arch1.1 renderer: AMD Radeon RX 6750 XT
(navi22 LLVM 16.0.6 DRM 3.54 6.5.3-zen1-1-zen) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: AMD Rembrandt Radeon High Definition Audio driver: snd_hda_intel
v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 12:00.1
chip-ID: 1002:1640 class-ID: 0403
Device-3: AMD Family 17h/19h HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 12:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.5.3-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 0.3.79 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 0e:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp14s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-2:2 chip-ID: 0bda:8771
class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.1
lmp-v: 10 status: discoverable: no pairing: no class-ID: 7c0104
Drives:
Local Storage: total: 18.24 TiB used: 8.03 TiB (44.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SKC3000D2048G
size: 1.86 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: EIFK31.6 temp: 41.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Crucial model: CT2000MX500SSD1
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 023 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST8000AS0002-1NA17Z
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5980 serial: <filter> fw-rev: AR15 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST8000AS0002-1NA17Z
size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5980 serial: <filter> fw-rev: RT18 scheme: GPT
Partition:
ID-1: / raw-size: 1.83 TiB size: 1.83 TiB (100.00%) used: 1.66 TiB (90.7%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 580 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 1.83 TiB size: 1.83 TiB (100.00%)
used: 1.66 TiB (90.7%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 1.83 TiB size: 1.83 TiB (100.00%)
used: 1.66 TiB (90.7%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 1.83 TiB size: 1.83 TiB (100.00%)
used: 1.66 TiB (90.7%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 30.5 GiB used: 27.2 MiB (0.1%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 68.0 C mobo: 34.0 C
Fan Speeds (rpm): N/A
GPU: device: amdgpu temp: 45.0 C mem: 44.0 C fan: 0 watts: 17.00
device: amdgpu temp: 40.0 C
Info:
Processes: 453 Uptime: 2m wakeups: 0 Memory: total: 32 GiB note: est.
available: 30.5 GiB used: 6.98 GiB (22.9%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 alt: 12
clang: 16.0.6 Packages: pm: pacman pkgs: 2234 libs: 559
tools: gnome-software,octopi,pamac,paru Shell: fish v: 3.6.1 default: Bash
v: 5.1.16 running-in: yakuake inxi: 3.3.29
Garuda (2.6.16-1):
System install date: 2023-07-10
Last full system update: 2023-09-23
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units: run-media-j-8TB2.mount packagekit.service syncthing.service systemd-vconsole-setup.service
Startup finished in 12.326s (firmware) + 2.552s (loader) + 5.061s (kernel) + 4.338s (initrd) + 1min 35.853s (userspace) = 2min 132ms
graphical.target reached after 1min 35.853s in userspace.
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
The time when unit became active or started is printed after the "@" character.
The time the unit took to start is printed after the "+" character.
graphical.target @1min 35.853s
└─multi-user.target @1min 35.853s
└─smb.service @1min 35.809s +33ms
└─nmb.service @1min 35.791s +17ms
└─network-online.target @1min 35.780s
└─NetworkManager-wait-online.service @1min 30.906s +4.872s
└─NetworkManager.service @1min 30.649s +246ms
└─dbus.service @1min 30.539s +25ms
└─basic.target @1min 30.536s
└─sockets.target @1min 30.536s
└─virtlogd.socket @1min 30.536s
└─sysinit.target @1min 30.533s
└─systemd-timesyncd.service @1min 30.511s +21ms
└─systemd-tmpfiles-setup.service @1min 30.421s +76ms
└─local-fs.target @1min 30.412s
└─run-user-1000-doc.mount @1min 32.320s
└─run-user-1000.mount @1min 31.905s
└─local-fs-pre.target @529ms
└─systemd-tmpfiles-setup-dev.service @504ms +23ms
└─systemd-tmpfiles-setup-dev-early.service @435ms +56ms
└─kmod-static-nodes.service @222ms +54ms
filo
6 October 2023 07:33
7
OK, I think this confirms to be the bottleneck (I don’t see anything else important).
cat /etc/fstab
and
lsblk -f
?
1 Like
Smurg
6 October 2023 10:01
8
cat /etc/fstab
File: /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a device; this may
# be used with UUID= as a more robust way to name devices that works even if
# disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
UUID=157E-16A9 /boot/efi vfat noatime 0 2
UUID=f343e266-2bba-4823-826a-311cb6319709 / btrfs subvol=/@,noatime,compress=zstd 0 0
UUID=f343e266-2bba-4823-826a-311cb6319709 /home btrfs subvol=/@home,noatime,compress=zstd 0 0
UUID=f343e266-2bba-4823-826a-311cb6319709 /root btrfs subvol=/@root,noatime,compress=zstd 0 0
UUID=f343e266-2bba-4823-826a-311cb6319709 /srv btrfs subvol=/@srv,noatime,compress=zstd 0 0
UUID=f343e266-2bba-4823-826a-311cb6319709 /var/cache btrfs subvol=/@cache,noatime,compress=zstd 0 0
UUID=f343e266-2bba-4823-826a-311cb6319709 /var/log btrfs subvol=/@log,noatime,compress=zstd 0 0
UUID=f343e266-2bba-4823-826a-311cb6319709 /var/tmp btrfs subvol=/@tmp,noatime,compress=zstd 0 0
UUID=29f15791-f1dd-436f-902e-804af7e61bb0 swap swap defaults 0 0
tmpfs /tmp tmpfs noatime,mode=1777 0 0
UUID=34a626e2-8c10-453a-ab86-d896fff6c46d /run/media/j/8TB/ ext4 nofail 0 0
UUID=3B3AB44977D448F4 /run/media/j/8TB2/ ext4 nofail 0 0
UUID=04781BCC781BBB7E /mnt ntfs noauto,users 0 0
UUID=232c7499-efa9-4066-a95e-6c58183b8558 /run/media/j/Sata\040SSD btrfs nofail,users 0 0
#/dev/sda2 /run/media/j/SSD btrfs users 0 0
lsblk -f
NAME FSTYPE FSVER LABEL UUID FSAVAIL FSUSE% MOUNTPOINTS
sda
└─sda1 btrfs Sata SSD 232c7499-efa9-4066-a95e-6c58183b8558 1.8T 0% /run/media/j/Sata SSD
sdb
└─sdb1 ntfs 8TB2 3B3AB44977D448F4
sdc
└─sdc1 ext4 1.0 8TB 34a626e2-8c10-453a-ab86-d896fff6c46d 488.1G 88% /run/media/j/8TB
zram0 [SWAP]
nvme0n1
├─nvme0n1p1 vfat FAT32 157E-16A9 298.8M 0% /boot/efi
├─nvme0n1p2 btrfs f343e266-2bba-4823-826a-311cb6319709 /var/tmp
└─nvme0n1p3 swap 1 swap 29f15791-f1dd-436f-902e-804af7e61bb0
filo
6 October 2023 10:17
9
Smurg:
UUID=34a626e2-8c10-453a-ab86-d896fff6c46d /run/media/j/8TB/ ext4 nofail 0 0
UUID=3B3AB44977D448F4 /run/media/j/8TB2/ ext4 nofail 0 0
UUID=04781BCC781BBB7E /mnt ntfs noauto,users 0 0
UUID=232c7499-efa9-4066-a95e-6c58183b8558 /run/media/j/Sata\040SSD btrfs nofail,users 0 0
The delay should come from somewhere here.
system
20 October 2023 10:17
10
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.