I Have This ERROR Please Look ==> root: 23

Firas · 6 February 2023 04:40

garuda-inxi
System:
  Kernel: 6.1.9-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=13aa3a7a-1113-4447-8543-65930ee32eba rw rootflags=subvol=@
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    loglevel=3 ibt=off
  Desktop: MATE v: 1.26.0 info: mate-panel wm: marco v: 1.26.1 vt: 1
    dm: LightDM v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: PRIME Z490-A v: Rev 1.xx serial: <superuser required>
    UEFI: American Megatrends v: 2601 date: 05/17/2022
CPU:
  Info: model: Intel Core i7-10700K bits: 64 type: MT MCP arch: Comet Lake
    gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
    model-id: 0xA5 (165) stepping: 5 microcode: 0xF4
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB
    L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 3486 high: 3800 min/max: 800/5100 scaling:
    driver: intel_pstate governor: powersave cores: 1: 3800 2: 3800 3: 3800
    4: 3800 5: 3800 6: 3800 7: 3800 8: 3800 9: 3800 10: 3800 11: 1786 12: 3800
    13: 3800 14: 3800 15: 800 16: 3800 bogomips: 121596
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: ASUSTeK driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands
    process: GF 14nm built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: HDMI-A-1 empty: DP-1, DP-2, DVI-D-1, HDMI-A-2
    bus-ID: 01:00.0 chip-ID: 1002:67df class-ID: 0300 temp: 52.0 C
  Display: x11 server: X.Org v: 21.1.6 compositor: marco v: 1.26.1 driver:
    X: loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
    s-diag: 777mm (30.58")
  Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: AOC Q32G1WG4 serial: <filter>
    built: 2019 res: 2560x1440 dpi: 93 gamma: 1.2 size: 697x393mm (27.44x15.47")
    diag: 800mm (31.5") ratio: 16:9 modes: max: 2560x1440 min: 720x400
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo
    missing.
Audio:
  Device-1: Intel Comet Lake PCH cAVS vendor: ASUSTeK driver: snd_hda_intel
    v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 00:1f.3
    chip-ID: 8086:06c8 class-ID: 0403
  Device-2: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s
    lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aaf0 class-ID: 0403
  Sound API: ALSA v: k6.1.9-zen1-1-zen running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.65 running: yes
Network:
  Device-1: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel pcie:
    gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 04:00.0 chip-ID: 8086:15f3
    class-ID: 0200
  IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 3.18 TiB used: 13.44 GiB (0.4%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
    model: WDS250G2B0C-00PXH0 size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 211070WD temp: 36.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Samsung
    model: SSD 970 EVO Plus 250GB size: 232.89 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 2B2QEXM7 temp: 45.9 C scheme: MBR
  ID-3: /dev/sda maj-min: 8:0 vendor: Toshiba model: HDWD130 size: 2.73 TiB
    block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s type: HDD
    rpm: 7200 serial: <filter> rev: ACF0 scheme: GPT
Partition:
  ID-1: / raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 13.44 GiB (5.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 608 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 13.44 GiB (5.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 13.44 GiB (5.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 232.59 GiB size: 232.59 GiB (100.00%)
    used: 13.44 GiB (5.8%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 42.0 C mobo: N/A gpu: amdgpu temp: 52.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 1188
Info:
  Processes: 384 Uptime: 2m wakeups: 0 Memory: 31.25 GiB
  used: 3.63 GiB (11.6%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 1451
  libs: 360 tools: gnome-software,octopi,pamac,paru,yay Shell: Bash v: 5.1.16
  running-in: mate-terminal inxi: 3.3.24
Garuda (2.6.14-1):
  System install date:     2023-02-06
  Last full system update: 2023-02-06 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager mkinitcpio
  Windows dual boot:       No/Undetected
  Failed units:

I Have this error

Please check and merge
Updating the desktop file MIME type cache...
Performing snapper post snapshots for the following configurations...
==> root: 23
Syncing all file systems...
Cloning input-devices-support build files...
Generating input-devices-support information...

Building input-devices-support...
==> Making package: input-devices-support 1.0.4-1 (Mo 06 Feb 2023 05:37:07 CET)
==> Checking runtime dependencies...
==> Missing dependencies:
-> touchegg
==> Checking buildtime dependencies...
==> ERROR: Could not resolve all dependencies.

filo · 6 February 2023 04:59

First of all, reboot and try again. Probably unrelated, but you never can say.
That dependency (touchegg) should be brought in automatically, but it’s not clear what you were doing (please always provide clear context).
I assume you were trying to install input-devices-support? How?
You should be able to do it with

paru input-devices-support

If not working, you could try install touchegg before that in the same way, but it should not be needed.
You’ll probably be warned that touchegg must replace libinput-gestures. Accept that.
And remember that paru always shows you a preview of the PKGBUILD. Exit that with button q.

Firas · 6 February 2023 05:25

It worked but i lost all right click activities and all my desktop icons

filo · 6 February 2023 05:47

My apologies.
Maybe you meant to install our package for
input-devices-support, not the one in the AUR? I was fooled by touchegg, which is not part of our package (we have libinput-gestures).
If so, you could give a

sudo pacman -S input-devices-support

and replace the package you installed before.
It might be useful to uninstall touchegg in that case.
Or just see if touchegg is good for you

Firas · 6 February 2023 05:59

Its not working
and I hate to reinstall because i have been doing that all day
what can we do

When i restart
my background is black and then comes my background

but stll no right click no icons

filo · 6 February 2023 06:03

Just restore the snapshot created before that installation

system · 10 February 2023 13:50

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.