I have been attempting updating Garuda for several days and I'm having dependency problems. I update either through update or garuda -update and I'm not sure if there's a difference

[dablues72]

ystem:
Kernel: 6.5.7-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=013a0e6f-1e15-4ec6-8862-4c62cb69ca18 rw rootflags=subvol=@
quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 5.27.8 tk: Qt v: 5.15.11 info: latte-dock
wm: kwin_x11 vt: 2 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: ROG STRIX B550-F GAMING (WI-FI) v: Rev X.0x
serial: <superuser required> UEFI: American Megatrends v: 3202
date: 06/15/2023
CPU:
Info: model: AMD Ryzen 5 5600G with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3 gen: 4 level: v3 note: check built: 2021-22
process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80) stepping: 0
microcode: 0xA50000D
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 978 high: 3877 min/max: 400/4464 scaling:
driver: amd-pstate-epp governor: performance cores: 1: 400 2: 400 3: 400
4: 400 5: 400 6: 3868 7: 400 8: 400 9: 400 10: 3877 11: 400 12: 400
bogomips: 93426
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
driver: amdgpu v: kernel arch: GCN-4 code: Arctic Islands process: GF 14nm
built: 2016-20 pcie: gen: 3 speed: 8 GT/s lanes: 8 link-max: lanes: 16
ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 01:00.0
chip-ID: 1002:67df class-ID: 0300 temp: 61.0 C
Device-2: Logitech Webcam C270 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2:2 chip-ID: 046d:0825
class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.2.1
compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: HDMI-A-1 mapped: HDMI-A-0 model: SCEI MONITOR serial: <filter>
built: 2011 res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2
size: 522x294mm (20.55x11.57") diag: 600mm (23.6") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.2.1-arch1.2
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 480 Graphics
(polaris10 LLVM 16.0.6 DRM 3.54 6.5.7-zen2-1-zen) device-ID: 1002:67df
memory: 7.81 GiB unified: no
API: Vulkan v: 1.3.264 layers: 13 device: 0 type: discrete-gpu name: AMD
Radeon RX 480 Graphics (RADV POLARIS10) driver: mesa radv
v: 23.2.1-arch1.2 device-ID: 1002:67df surfaces: xcb,xlib device: 1
type: cpu name: llvmpipe (LLVM 16.0.6 256 bits) driver: mesa llvmpipe
v: 23.2.1-arch1.2 (LLVM 16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 8
link-max: lanes: 16 bus-ID: 01:00.1 chip-ID: 1002:aaf0 class-ID: 0403
Device-2: AMD Renoir Radeon High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 07:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-3: AMD Family 17h/19h HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 07:00.6 chip-ID: 1022:15e3
class-ID: 0403
Device-4: Logitech Webcam C270 driver: snd-usb-audio,uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-2:2 chip-ID: 046d:0825
class-ID: 0102 serial: <filter>
API: ALSA v: k6.5.7-zen2-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 0.3.82 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp5s0 state: up mac: <filter>
Device-2: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 06:00.0
chip-ID: 8086:15f3 class-ID: 0200
IF: enp6s0 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-5:3 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 1 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: <filter> bt-v: 5.2 lmp-v: 11
status: discoverable: no pairing: no
Drives:
Local Storage: total: 1.36 TiB used: 384.89 GiB (27.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT1000MX500SSD1
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 043 scheme: MBR
ID-2: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT500MX500SSD1
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 023 scheme: GPT
Partition:
ID-1: / raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 384.89 GiB (82.7%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 1.2 MiB (0.4%) fs: vfat dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 384.89 GiB (82.7%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-4: /var/log raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 384.89 GiB (82.7%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-5: /var/tmp raw-size: 465.46 GiB size: 465.46 GiB (100.00%)
used: 384.89 GiB (82.7%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.41 GiB used: 10.5 MiB (0.1%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 39.6 C mobo: N/A gpu: amdgpu temp: 62.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 753
Info:
Processes: 340 Uptime: 40m wakeups: 0 Memory: total: 16 GiB note: est.
available: 15.41 GiB used: 4.54 GiB (29.5%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: 2127 pm: pacman pkgs: 2124 libs: 580 tools: octopi,pamac,paru,yay
pm: snap pkgs: 3 Shell: fish v: 3.6.1 default: Bash v: 5.1.16
running-in: konsole inxi: 3.3.30
Garuda (2.6.17-1):
System install date:     2023-10-19
Last full system update: 2023-10-18
Is partially upgraded:   No
Relevant software:       snapper NetworkManager mkinitcpio
Windows dual boot:       No/Undetected
Failed units:            nmb.service

I have tried using several snapshots and booting to no avail, and would appreciate any help. I have been using Garuda for a couple of years with next to no problems.

[BluishHumility]

Read through this thread when you have a chance:

Arch package name changes

Hello everyone Some of you have already discovered that there are a few changes in the Arch repository, possibly breaking some package dependencies. So what’s going on here? KDE 6 is going to be released next year, which moves the entire desktop from Qt5 to Qt6. In order to prepare the upgrade, Archlinux alters current packages to have a 5 at the end (reflecting being built against Qt5). This was recently also applied to KDE frameworks, which a lot of packages of ours and the AU…

After that, run the update command and paste the input/output into the thread so we can see what the problem is.

[dablues72]

╭─markf@mark1 in ~
╰─λ update
[sudo] password for markf:
:: Synchronizing package databases...
garuda is up to date
core is up to date
extra                                   8.2 MiB  8.88 MiB/s 00:01 [------------------------------------] 100%
multilib is up to date
chaotic-aur                             2.6 MiB  1555 KiB/s 00:02 [------------------------------------] 100%

--> Refreshing mirrorlists using rate-mirrors, please be patient..🍵
:: Synchronizing package databases...
garuda downloading...
core downloading...
extra downloading...
multilib downloading...
chaotic-aur downloading...
:: Starting full system upgrade...
:: Replace kde-servicemenus-pdf with chaotic-aur/kf5-servicemenus-pdf? [Y/n] y
warning: kde-servicemenus-pdf-encrypt-decrypt: local (1-1.4) is newer than chaotic-aur (1-1)
warning: reshade-shaders-git: local (r909.2459c73-1) is newer than chaotic-aur (r33.9e9fa9e-1)
resolving dependencies...
looking for conflicting packages...
:: cachyos-ananicy-rules-git and ananicy-rules are in conflict (ananicy-rules-git). Remove ananicy-rules? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: installing kio5 (5.111.0-1) breaks dependency 'kio' required by kipi-plugins
:: installing kxmlgui5 (5.111.0-1) breaks dependency 'kxmlgui' required by libkipi
:: installing kservice5 (5.111.0-1) breaks dependency 'kservice' required by libkipi
:: installing kcoreaddons5 (5.111.0-1) breaks dependency 'kcoreaddons' required by libmediawiki
:: installing kauth5 (5.111.0-1) breaks dependency 'kauth' required by samba-mounter-git
:: installing kcmutils5 (5.111.0-1) breaks dependency 'kcmutils' required by samba-mounter-git
:: installing kconfig5 (5.111.0-1) breaks dependency 'kconfig' required by samba-mounter-git
:: installing kio5 (5.111.0-1) breaks dependency 'kio' required by samba-mounter-git
:: installing ki18n5 (5.111.0-1) breaks dependency 'ki18n' required by samba-mounter-git
:: installing solid5 (5.111.0-1) breaks dependency 'solid' required by samba-mounter-git

Thanks for your prompt reply! Here is the text.

[SGS]

@dablues72

Thanks for your prompt reply! Here is the text.

@BluishHumility

Read through this thread when you have a chance:

Arch package name changes

Hello everyone Some of you have already discovered that there are a few changes in the Arch repository, possibly breaking some package dependencies. So what’s going on here? KDE 6 is going to be released next year, which moves the entire desktop from Qt5 to Qt6. In order to prepare the upgrade, Archlinux alters current packages to have a 5 at the end (reflecting being built against Qt5). This was recently also applied to KDE frameworks, which a lot of packages of ours and the AU…

[dr460nf1r3]

@dablues72

:: cachyos-ananicy-rules-git and ananicy-rules are in conflict (ananicy-rules-git). Remove ananicy-rules? [y/N] y

Witness garuda-update working as intended here

[BluishHumility]

@dablues72

kipi-plugins

@dablues72

libkipi

@dablues72

libmediawiki

@dablues72

samba-mounter-git

These packages have all been removed from the repos and should be uninstalled before you take the update.

sudo pacman -R kipi-plugins libkipi libmediawiki samba-mounter-git

If you want to replace any of them with the AUR version you should do that after you finish the update.

[dablues72]

Thanks so much everyone! But, is there a difference between Update and Garuda-update.? It seems like I might be having more problems after using the latter.

[BluishHumility]

@dablues72

is there a difference between Update and Garuda-update.?

They are the same.

❯ ls /usr/bin/update
lrwxrwxrwx 22 root 24 Sep 20:17 update -> /usr/bin/garuda-update

[dablues72]

Thanks! I thought so.