╭─batman@vitcus in ~ as 🧙
[🔴] × garuda-inxi
System:
Kernel: 6.8.7-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=744736bd-ab80-41dd-ade6-eb0f243d02ce rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.0.4 tk: Qt v: N/A info: frameworks v: 6.1.0
wm: kwin_x11 vt: 2 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: HP product: Victus by HP Gaming Laptop 15-fb1xxx v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 8C30 v: 88.14 serial: <superuser required>
part-nu: 8L083PA#ACJ uuid: <superuser required> UEFI: AMI v: F.03
date: 08/10/2023
Battery:
ID-1: BAT0 charge: 48.6 Wh (100.0%) condition: 48.6/48.6 Wh (100.0%)
volts: 13.1 min: 11.6 model: HP Primary type: Li-ion serial: <filter>
status: full cycles: 99
CPU:
Info: model: AMD Ryzen 5 7535HS with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 3+ gen: 4 level: v3 note: check built: 2022 process: TSMC n6 (7nm)
family: 0x19 (25) model-id: 0x44 (68) stepping: 1 microcode: 0xA404102
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 1624 high: 2505 min/max: 400/4603 scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 2505 2: 400 3: 400
4: 1517 5: 2394 6: 2395 7: 1368 8: 1368 9: 2394 10: 1964 11: 400 12: 2392
bogomips: 79050
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA107 [GeForce RTX 2050] vendor: Hewlett-Packard
driver: nvidia v: 550.76 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-04; EOL~2026-12-xx) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-2022 pcie: gen: 4 speed: 16 GT/s
lanes: 8 link-max: lanes: 16 ports: active: none empty: HDMI-A-1
bus-ID: 01:00.0 chip-ID: 10de:25ad class-ID: 0300
Device-2: AMD Rembrandt [Radeon 680M] vendor: Hewlett-Packard
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: eDP-1
empty: DP-1, DP-2, DP-3, DP-4, DP-5, DP-6, DP-7, DP-8, Writeback-1
bus-ID: 06:00.0 chip-ID: 1002:1681 class-ID: 0300 temp: 53.0 C
Device-3: Chicony HP Wide Vision HD Camera driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-3:2 chip-ID: 04f2:b766
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 23.2.6
compositor: kwin_x11 driver: X: loaded: amdgpu,nvidia
unloaded: modesetting,nouveau alternate: fbdev,nv,vesa dri: radeonsi
gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: eDP-1 mapped: eDP model: BOE Display 0x094d built: 2020
res: 1920x1080 hz: 144 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia drv: amd radeonsi platforms: device: 0
drv: nvidia device: 2 drv: radeonsi device: 3 drv: swrast gbm: drv: nvidia
surfaceless: drv: nvidia x11: drv: radeonsi inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: amd mesa v: 24.0.5-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon Graphics (radeonsi
rembrandt LLVM 17.0.6 DRM 3.57 6.8.7-zen1-2-zen) device-ID: 1002:1681
memory: 500 MiB unified: no
API: Vulkan v: 1.3.279 layers: 14 device: 0 type: integrated-gpu name: AMD
Radeon Graphics (RADV REMBRANDT) driver: mesa radv v: 24.0.5-arch1.1
device-ID: 1002:1681 surfaces: xcb,xlib device: 1 type: discrete-gpu
name: NVIDIA GeForce RTX 2050 driver: nvidia v: 550.76
device-ID: 10de:25ad surfaces: xcb,xlib device: 2 type: cpu name: llvmpipe
(LLVM 17.0.6 256 bits) driver: mesa llvmpipe v: 24.0.5-arch1.1 (LLVM
17.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: NVIDIA vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 8 link-max: lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:2291 class-ID: 0403
Device-2: AMD Rembrandt Radeon High Definition Audio
vendor: Hewlett-Packard driver: snd_hda_intel v: kernel pcie: gen: 4
speed: 16 GT/s lanes: 16 bus-ID: 06:00.1 chip-ID: 1002:1640 class-ID: 0403
Device-3: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Hewlett-Packard
driver: snd_pci_acp6x v: kernel alternate: snd_pci_acp3x, snd_rn_pci_acp3x,
snd_pci_acp5x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
snd_sof_amd_acp63 pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 06:00.5
chip-ID: 1022:15e2 class-ID: 0480
Device-4: AMD Family 17h/19h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 06:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.8.7-zen1-2-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.0.5 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: e000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter
vendor: AzureWave driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s
lanes: 1 bus-ID: 03:00.0 chip-ID: 14c3:7961 class-ID: 0280
IF: wlo1 state: up mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB
rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4:3 chip-ID: 13d3:3567
class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
Local Storage: total: 476.94 GiB used: 20.12 GiB (4.2%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: WD PC
SN810 SDCPNRY-512G-1006 size: 476.94 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: HPS2 temp: 46.9 C scheme: GPT
Partition:
ID-1: / raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
used: 20.12 GiB (4.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 584 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
used: 20.12 GiB (4.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
used: 20.12 GiB (4.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
used: 20.12 GiB (4.2%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 6.97 GiB used: 1.19 GiB (17.1%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 61.5 C mobo: 44.0 C gpu: amdgpu temp: 55.0 C
Fan Speeds (rpm): fan-1: 2732 fan-2: 0
Info:
Memory: total: 8 GiB note: est. available: 6.97 GiB used: 3.62 GiB (52.0%)
Processes: 363 Power: uptime: 3h 11m states: freeze,mem,disk
suspend: s2idle wakeups: 1 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 2.75 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 1845 libs: 542 tools: octopi,paru Compilers:
clang: 17.0.6 gcc: 13.2.1 Shell: garuda-inxi default: fish v: 3.7.1
running-in: konsole inxi: 3.3.34
Garuda (2.6.26-1):
System install date: 2024-08-25
Last full system update: 2024-08-25
Is partially upgraded: Yes
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: Probably (Run as root to verify)
Failed units:
Some more info please .
How did you try?
2 Likes
And again, as mentioned in a previous topic, this must be fixed before anything else with
garuda-update
1 Like
without updating it cant install it bro
╭─batman@vitcus in ~ took 13ms
[🔍] × sudo pacman -S nodejs npm
[sudo] password for batman:
warning: nodejs-22.7.0-1 is up to date -- reinstalling
warning: npm-10.8.2-1 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Package (2) Old Version New Version Net Change
extra/nodejs 22.7.0-1 22.7.0-1 0.00 MiB
extra/npm 10.8.2-1 10.8.2-1 0.00 MiB
Total Installed Size: 66.08 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
(2/2) checking keys in keyring [------------------------------------] 100%
(2/2) checking package integrity [------------------------------------] 100%
(2/2) loading package files [------------------------------------] 100%
(2/2) checking for file conflicts [------------------------------------] 100%
(2/2) checking available disk space [------------------------------------] 100%
:: Running pre-transaction hooks...
(1/2) Rejecting pacman transaction if running in snapshot...
(2/2) Performing snapper pre snapshots for the following configurations...
==> root: 49
:: Processing package changes...
(1/2) reinstalling nodejs [------------------------------------] 100%
(2/2) reinstalling npm [------------------------------------] 100%
:: Running post-transaction hooks...
(1/6) Arming ConditionNeedsUpdate...
(2/6) Foreign/AUR package notification
dbus-python 1.3.2-3
ruby-abbrev 0.1.0-4
ruby-base64 0.1.1-4
ruby-benchmark 0.2.0-4
ruby-bigdecimal 3.1.2-4
ruby-bundledgems 3.0.6-1
ruby-cgi 0.3.6-1
ruby-csv 3.2.5-4
ruby-date 3.2.2-4
ruby-delegate 0.2.0-4
ruby-did_you_mean 1.6.1-4
ruby-digest 3.1.1-1
ruby-drb 2.1.0-5
ruby-english 0.7.1-5
ruby-etc 1.3.0-6
ruby-fcntl 1.0.1-4
ruby-fiddle 1.1.0-4
ruby-fileutils 1.6.0-4
ruby-find 0.1.1-4
ruby-forwardable 1.3.2-6
ruby-getoptlong 0.1.1-3
ruby-io-console 0.5.11-3
ruby-io-nonblock 0.1.0-3
ruby-io-wait 0.2.3-4
ruby-ipaddr 1.2.4-3
ruby-json 2.7.1-1
ruby-logger 1.5.1-3
ruby-mutex_m 0.1.1-3
ruby-net-http 0.2.2-2
ruby-open-uri 0.2.0-3
ruby-psych 4.0.6-1
ruby-reline 0.3.1-2
ruby-ruby2_keywords 0.0.5-1
ruby-stringio 3.0.2-4
ruby-time 0.2.0-4
ruby-tmpdir 0.1.2-3
ruby-uri 0.12.1-1
(3/6) Orphaned package notification...
=> No orphans found.
(4/6) Checking for .pacnew and .pacsave files...
(5/6) Performing snapper post snapshots for the following configurations...
==> root: 50
(6/6) Syncing all file systems...
╭─batman@vitcus in ~ as 🧙 took 8s
╰─λ
╭─batman@vitcus in ~ as 
took 15ms
╰─λ node -v
node: error while loading shared libraries: libicui18n.so.75: cannot open shared object file: No such file or directory
╭─batman@vitcus in ~ as took 15ms
[
] × npm -v
node: error while loading shared libraries: libicui18n.so.75: cannot open shared object file: No such file or directory
Use garuda-update or -Syu
1 Like
It has Big Package 
It is absolutely necessary that you perform the big initial update.
Then, if you update often, they will be smaller.
But you have to get used to frequent and also big updates with a rolling release.
6 Likes
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.