Today I updated and got an new version of hyprland. Because I’m using a plugin (hy3) the upgrade isn’t exactly smooth… It comes back up with errors in the config file 'cause it doesn’t load the plugin because it’s now outdated. In order to make it work, I had to run hyprpm update, hyprpm reload, and hyprpm enable hy3. I also rebooted 'cause things weren’t going exactly smoothly (see below). What is the “correct” process? (I think I first have to log out and back in so the new version of hyprland actually runs and hyprpm compiles against that?) Is there a way this can happen automatically when a new version of hyprland comes out?
(I also noticed that if I log out and log back in then hyprctl doesn’t work 'cause the control socket isn’t working. Has someone else noticed this or should I open an issue for that?)
inxi:
System:
Kernel: 6.14.6-1-clear arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-clear
root=UUID=941fde7f-dd53-42fc-87e1-085c47990c6b rw rootflags=subvol=@
quiet rd.luks.uuid=f4353337-f608-4153-8516-712c2bdd741a
rd.luks.uuid=bb53fa49-4911-4abe-a164-e31688cc2ebd
resume=/dev/mapper/luks-bb53fa49-4911-4abe-a164-e31688cc2ebd loglevel=3
nvme.noacpi=1 ibt=off
Desktop: Hyprland v: 0.49.0 with: waybar tools: swayidle avail: swaylock
vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: Framework product: Laptop (13th Gen Intel Core) v: A6
serial: <superuser required>
Mobo: Framework model: FRANMCCP06 v: A6 serial: <superuser required>
part-nu: FRANDECP06 uuid: <superuser required> UEFI: INSYDE v: 03.04
date: 05/24/2023
Battery:
ID-1: BAT1 charge: 54.4 Wh (95.9%) condition: 56.7/60.7 Wh (93.5%)
volts: 17.4 min: 15.5 model: NVT FRANGWA type: Li-ion serial: <filter>
status: charging cycles: 38
CPU:
Info: model: 13th Gen Intel Core i7-1360P bits: 64 type: MST AMCP
arch: Raptor Lake level: v3 note: check built: 2022+ process: Intel 7 (10nm)
family: 6 model-id: 0xBA (186) stepping: 2 microcode: 0x4128
Topology: cpus: 1x dies: 1 clusters: 6 cores: 12 threads: 16 mt: 4 tpc: 2
st: 8 smt: enabled cache: L1: 1.1 MiB desc: d-8x32 KiB, 4x48 KiB; i-4x32
KiB, 8x64 KiB L2: 9 MiB desc: 4x1.2 MiB, 2x2 MiB L3: 18 MiB desc: 1x18 MiB
Speed (MHz): avg: 400 min/max: 400/5000:3700 scaling: driver: intel_pstate
governor: performance cores: 1: 400 2: 400 3: 400 4: 400 5: 400 6: 400
7: 400 8: 400 9: 400 10: 400 11: 400 12: 400 13: 400 14: 400 15: 400
16: 400 bogomips: 83558
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Raptor Lake-P [UHD Graphics] vendor: Framework driver: i915
v: kernel alternate: xe arch: Xe process: Intel 10nm built: 2020-21 ports:
active: DP-2,DP-4,eDP-1 empty: DP-1,DP-3 bus-ID: 00:02.0
chip-ID: 8086:a720 class-ID: 0300
Device-2: Realtek Laptop Camera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:4 chip-ID: 0bda:5634
class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: Hyprland v: 0.49.0 driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: iris gpu: i915 d-rect: 8656x5104
display-ID: 1
Monitor-1: DP-2 pos: middle-l model: LG (GoldStar) Ultra HD
serial: <filter> built: 2017 res: mode: 3840x2160 hz: 60 scale: 120% (1.2)
to: 3202x1801 dpi: 163 gamma: 1.2 size: 600x340mm (23.62x13.39")
diag: 690mm (27.2") ratio: 16:9 modes: max: 3840x2160 min: 640x480
Monitor-2: DP-4 pos: top-right model: BenQ PD2500Q serial: <filter>
built: 2020 res: mode: 2560x1440 hz: 60 scale: 90% (0.9) to: 2849x1602
dpi: 118 gamma: 1.2 size: 553x311mm (21.77x12.24") diag: 634mm (25")
ratio: 16:9 modes: max: 2560x1440 min: 720x400
Monitor-3: eDP-1 pos: bottom-c model: BOE Display 0x0bca built: 2022 res:
mode: 2256x1504 hz: 60 scale: 125% (1.25) to: 1804x1203 dpi: 201 gamma: 1.2
size: 285x190mm (11.22x7.48") diag: 343mm (13.5") ratio: 3:2
modes: 2256x1504
API: Vulkan v: 1.4.313 layers: 5 device: 0 type: integrated-gpu
name: Intel Graphics (RPL-P) driver: mesa intel v: 25.0.5-arch1.1
device-ID: 8086:a720 surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 19.1.7 256 bits) driver: mesa llvmpipe v: 25.0.5-arch1.1 (LLVM
19.1.7) device-ID: 10005:0000 surfaces: N/A
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Info: Tools: api: vulkaninfo wl: kanshi, nwg-displays, wdisplays,
wlr-randr x11: xprop,xrandr
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS vendor: Framework
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_tgl
bus-ID: 00:1f.3 chip-ID: 8086:51ca class-ID: 0403
API: ALSA v: k6.14.6-1-clear status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.4.2 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6E AX210/AX1675 2x2 [Typhoon Peak] driver: iwlwifi
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: aa:00.0
chip-ID: 8086:2725 class-ID: 0280
IF: wlp170s0 state: up mac: <filter>
Device-2: ASIX AX88179 Gigabit Ethernet driver: cdc_ncm type: USB rev: 3.2
speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 2-4.3:4 chip-ID: 0b95:1790
class-ID: 0a00 serial: <filter>
IF: usb10 state: up speed: 1000 Mbps duplex: half mac: <filter>
Info: services: NetworkManager, sshd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-10:7 chip-ID: 8087:0032
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 1 state: up address: <filter> bt-v: 5.3
lmp-v: 12 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
Local Storage: total: 931.51 GiB used: 381.85 GiB (41.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital
model: WD BLACK SN850X 1000GB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 620311WD temp: 40.9 C scheme: GPT
Partition:
ID-1: / raw-size: 897.05 GiB size: 897.05 GiB (100.00%)
used: 381.85 GiB (42.6%) fs: btrfs dev: /dev/dm-1 maj-min: 252:1
mapped: luks-f4353337-f608-4153-8516-712c2bdd741a
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 776 KiB (0.3%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 897.05 GiB size: 897.05 GiB (100.00%)
used: 381.85 GiB (42.6%) fs: btrfs dev: /dev/dm-1 maj-min: 252:1
mapped: luks-f4353337-f608-4153-8516-712c2bdd741a
ID-4: /var/log raw-size: 897.05 GiB size: 897.05 GiB (100.00%)
used: 381.85 GiB (42.6%) fs: btrfs dev: /dev/dm-1 maj-min: 252:1
mapped: luks-f4353337-f608-4153-8516-712c2bdd741a
ID-5: /var/tmp raw-size: 897.05 GiB size: 897.05 GiB (100.00%)
used: 381.85 GiB (42.6%) fs: btrfs dev: /dev/dm-1 maj-min: 252:1
mapped: luks-f4353337-f608-4153-8516-712c2bdd741a
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 34.17 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/dm-0 maj-min: 252:0
mapped: luks-bb53fa49-4911-4abe-a164-e31688cc2ebd
ID-2: swap-2 type: zram size: 31.05 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lz4,deflate max-streams: 16 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 63.0 C mobo: N/A
Fan Speeds (rpm): cpu: 3575
Info:
Memory: total: 32 GiB note: est. available: 31.05 GiB
used: 15.22 GiB (49.0%)
Processes: 438 Power: uptime: 18m states: freeze,mem,disk suspend: s2idle
avail: deep wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.4 GiB services: thermald,upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1638 libs: 458 tools: octopi,pacseek,paru
pm: appimage pkgs: 0 Compilers: clang: 19.1.7 gcc: 15.1.1 Shell: garuda-inxi
default: fish v: 4.0.2 running-in: tmux: inxi: 3.3.38
Garuda (2.7.2-1):
System install date: 2023-09-30
Last full system update: 2025-05-21
Is partially upgraded: No
Relevant software: snapper tlp NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units: