Hello everyone,
Yesterday, I started experiencing update issues when using the "garuda-update" command. Updating "lpdlog" breaks dependencies.
I was able to partially update by excluding that package, but that's not a viable option in the long run...
Before I make any changes and potentially disrupt everything, I would greatly appreciate some advice.
garuda-inxi:
╭─jlt@jlt in ~
╰─λ garuda-inxi
System:
Kernel: 6.4.12-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=774750a6-2094-4fa5-8dfb-08abdeefb4b6 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: Hyprland info: waybar vt: 1 dm: SDDM Distro: Garuda Linux
base: Arch Linux
Machine:
Type: Desktop System: EVGA product: X570 DARK v: N/A
serial: <superuser required> Chassis: type: 3 serial: <superuser required>
Mobo: EVGA model: X570 DARK v: 1.2.0 serial: <superuser required>
UEFI: American Megatrends LLC. v: 1.09 date: 12/27/2022
Battery:
ID-1: hidpp_battery_1 charge: 96% condition: N/A volts: 4.1 min: N/A
model: Logitech Gaming Mouse G900 type: N/A serial: <filter>
status: discharging
Device-1: hidpp_battery_0 model: Logitech MX Keys for Mac serial: <filter>
charge: 100% (should be ignored) rechargeable: yes status: discharging
CPU:
Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 2 microcode: 0xA20120A
Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB
L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 3406 high: 3601 min/max: 2200/5083 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 3400 2: 3400
3: 3400 4: 3400 5: 3400 6: 3400 7: 3400 8: 3400 9: 3400 10: 3400 11: 3400
12: 3400 13: 3400 14: 3400 15: 3400 16: 3400 17: 3400 18: 3400 19: 3400
20: 3400 21: 3400 22: 3400 23: 3400 24: 3400 25: 3400 26: 3400 27: 3400
28: 3400 29: 3400 30: 3601 31: 3400 32: 3400 bogomips: 217607
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GM200 [GeForce GTX 980 Ti] vendor: ASUSTeK driver: nouveau
v: kernel non-free: 535.xx+ status: current (as of 2023-08) arch: Maxwell
code: GMxxx process: TSMC 28nm built: 2014-19 pcie: gen: 1 speed: 2.5 GT/s
lanes: 16 link-max: gen: 3 speed: 8 GT/s ports: active: DP-3,HDMI-A-1
empty: DP-1,DP-2,DVI-I-1 bus-ID: 0b:00.0 chip-ID: 10de:17c8 class-ID: 0300
temp: 59.0 C
Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.2.0
compositor: Hyprland driver: X: loaded: nouveau unloaded: modesetting
alternate: fbdev,nv,vesa dri: nouveau gpu: nouveau d-rect: 5360x1440
display-ID: 1
Monitor-1: DP-3 pos: right model: Acer XR341CK serial: <filter>
built: 2015 res: 3440x1440 hz: 75 dpi: 107 gamma: 1.2 scale: 1
size: 819x363mm (32.24x14.29") diag: 896mm (35.3") modes: max: 3440x1440
min: 640x480
Monitor-2: HDMI-A-1 pos: primary,left model: Dell U2412M serial: <filter>
built: 2013 res: 1920x1200 hz: 60 dpi: 94 gamma: 1.2 scale: 1
size: 518x324mm (20.39x12.76") diag: 611mm (24.1") ratio: 16:10 modes:
max: 1920x1200 min: 720x400
API: EGL/GBM Message: No known Wayland EGL/GBM data sources.
Audio:
Device-1: NVIDIA GM200 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16
link-max: gen: 3 speed: 8 GT/s bus-ID: 0b:00.1 chip-ID: 10de:0fb0
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: eVga.com.
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0d:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: ASUSTek ASUS Xonar Essence One
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 480 Mb/s
lanes: 1 mode: 2.0 bus-ID: 1-2:2 chip-ID: 0b05:17a8 class-ID: 0300
API: ALSA v: k6.4.12-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 0.3.78 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I225-V driver: igc v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 port: N/A bus-ID: 05:00.0 chip-ID: 8086:15f3
class-ID: 0200
IF: enp5s0 state: up speed: 2500 Mbps duplex: full mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp6s0 state: down mac: <filter>
Device-3: Intel Ethernet I225-V driver: igc v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 port: N/A bus-ID: 07:00.0 chip-ID: 8086:15f3
class-ID: 0200
IF-ID-1: eno1 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-1:2 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c0104
Drives:
Local Storage: total: 3.18 TiB used: 1.39 TiB (43.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Seagate
model: WDS200T1X0E-00AFY0 size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 614900WD temp: 38.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung model: SSD 970 EVO 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 2B2QEXE7 temp: 34.9 C
scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 850 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT
Partition:
ID-1: / raw-size: 96 GiB size: 96 GiB (100.00%) used: 21.46 GiB (22.4%)
fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:5
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 576 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:2
ID-3: /home raw-size: 96 GiB size: 96 GiB (100.00%)
used: 21.46 GiB (22.4%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:5
ID-4: /var/log raw-size: 96 GiB size: 96 GiB (100.00%)
used: 21.46 GiB (22.4%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:5
ID-5: /var/tmp raw-size: 96 GiB size: 96 GiB (100.00%)
used: 21.46 GiB (22.4%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:5
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.27 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 32 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 40.5 C mobo: N/A gpu: nouveau temp: 59.0 C
Fan Speeds (rpm): N/A gpu: nouveau fan: 0
Info:
Processes: 612 Uptime: 43m wakeups: 4 Memory: total: 32 GiB
available: 31.27 GiB used: 2.46 GiB (7.9%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: pm: pacman pkgs: 1589 libs: 398
tools: gnome-software,pamac,paru,yay Shell: fish v: 3.6.1
running-in: alacritty inxi: 3.3.29
Garuda (2.6.16-1):
System install date: 2023-08-29
Last full system update: 2023-08-28
Is partially upgraded: Yes
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units:
Here is my garuda-update and pamac update result:
╭─jlt@jlt in ~ took 2ms
╰─λ garuda-update
[sudo] password for jlt:
:: Synchronizing package databases...
garuda is up to date
core is up to date
extra 8.3 MiB 21.2 MiB/s 00:00 [-----------------------------------------------------------] 100%
multilib is up to date
chaotic-aur 2.8 MiB 3.96 MiB/s 00:01 [-----------------------------------------------------------] 100%
blackarch is up to date
--> Refreshing mirrorlists using rate-mirrors, please be patient..🍵
:: Synchronizing package databases...
garuda downloading...
core downloading...
extra downloading...
multilib downloading...
chaotic-aur downloading...
blackarch downloading...
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: installing spdlog (1.12.0-1) breaks dependency 'libspdlog.so=1.11-64' required by waybar-hyprland-git
╭─jlt@jlt in ~ as 🧙 took 29s
[🔴] × sudo pamac update
Warning: Building packages as dynamic user
Warning: Setting build directory to /var/cache/pamac
Preparing...
Synchronizing package databases...
Refreshing AUR...
Warning: installing spdlog (1.12.0-1) breaks dependency 'libspdlog.so=1.11-64' required by waybar-hyprland-git
Add waybar-hyprland-git to remove
Error: Failed to prepare transaction:
could not satisfy dependencies:
- removing waybar-hyprland-git breaks dependency 'waybar-hyprland-git' required by garuda-hyprland-settings
Resolving dependencies...
Checking inter-conflicts...
Error: Failed to prepare transaction:
could not satisfy dependencies:
- removing waybar-hyprland-git breaks dependency 'waybar-hyprland-git' required by garuda-hyprland-settings
Thank you for your wonderfull spin of Hyprland...