Hyprland | garuda-hyprland-linux-zen-240218.iso | hyprland.conf file error

First, here again is my inxi:

  Kernel: 6.7.5-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc
    v: 13.2.1 clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=392934a5-e5c7-48e3-b03c-269dc7165fec rw
    rootflags=subvol=@ quiet loglevel=3 ibt=off
  Desktop: Hyprland v: 0.35.0-68-gea3fd13e with: waybar
    tools: avail: swayidle,swaylock vt: 1 dm: SDDM
    Distro: Garuda base: Arch Linux
  Type: Laptop System: TOSHIBA product: Satellite C55t-A
    v: PSCF6U-01T00D serial: <superuser required>
  Mobo: TOSHIBA model: Portable PC v: MP
    serial: <superuser required> part-nu: PSCF6U
    uuid: <superuser required> UEFI-[Legacy]: Insyde v: 1.40
    date: 04/28/2014
  ID-1: BAT0 charge: 27.2 Wh (100.0%)
    condition: 27.2/47.5 Wh (57.2%) volts: 10.8 min: 10.8
    model: PA5109U-1BRS type: Li-ion serial: <filter>
    status: full
  Device-1: hidpp_battery_0 model: Logitech Wireless Mouse
    M325 serial: <filter> charge: 100% (should be ignored)
    rechargeable: yes status: discharging
  Info: model: Intel Celeron 1005M bits: 64 type: MCP
    arch: Ivy Bridge level: v2 built: 2012-15
    process: Intel 22nm family: 6 model-id: 0x3A (58)
    stepping: 9 microcode: 0x21
  Topology: cpus: 1x cores: 2 smt: <unsupported> cache:
    L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB
    desc: 2x256 KiB L3: 2 MiB desc: 1x2 MiB
  Speed (MHz): avg: 1385 high: 1570 min/max: 1200/1900
    scaling: driver: intel_cpufreq governor: schedutil cores:
    1: 1570 2: 1200 bogomips: 7582
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
  Device-1: Intel 3rd Gen Core processor Graphics
    vendor: Toshiba driver: i915 v: kernel arch: Gen-7
    process: Intel 22nm built: 2012-13 ports: active: LVDS-1
    empty: DP-1,HDMI-A-1,VGA-1 bus-ID: 00:02.0
    chip-ID: 8086:0156 class-ID: 0300
  Device-2: Importek TOSHIBA Web Camera - HD
    driver: uvcvideo type: USB rev: 2.0 speed: 480 Mb/s lanes: 1
    mode: 2.0 bus-ID: 1-1.3:4 chip-ID: 10f1:1a52
    class-ID: 0e02
  Display: wayland server: X.org v: with: Xwayland
    v: 23.2.4 compositor: Hyprland v: 0.35.0-68-gea3fd13e
    driver: X: loaded: modesetting alternate: fbdev,intel,vesa
    dri: crocus gpu: i915 display-ID: 1
  Monitor-1: LVDS-1 model: Samsung 0x4147 built: 2012
    res: 1366x768 hz: 60 dpi: 101 gamma: 1.2 scale: 1
    size: 344x194mm (13.54x7.64") diag: 395mm (15.5")
    ratio: 16:9 modes: 1366x768
  API: Vulkan v: 1.3.276 layers: 3 device: 0
    type: integrated-gpu name: Intel HD Graphics 2500 (IVB GT1)
    driver: mesa intel v: 24.0.1-arch1.1 device-ID: 8086:0156
    surfaces: xcb,xlib,wayland device: 1 type: cpu
    name: llvmpipe (LLVM 16.0.6 128 bits)
    driver: mesa llvmpipe v: 24.0.1-arch1.1 (LLVM 16.0.6)
    device-ID: 10005:0000 surfaces: xcb,xlib,wayland
  API: EGL Message: EGL data requires eglinfo. Check
  Device-1: Intel 7 Series/C216 Family High Definition Audio
    vendor: Toshiba 7 driver: snd_hda_intel v: kernel
    bus-ID: 00:1b.0 chip-ID: 8086:1e20 class-ID: 0403
  API: ALSA v: k6.7.5-zen1-1-zen status: kernel-api
    tools: N/A
  Server-1: sndiod v: N/A status: off
    tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.0.3 status: active with:
    1: pipewire-pulse status: active 2: wireplumber
    status: active 3: pipewire-alsa type: plugin 4: pw-jack
    type: plugin tools: pactl,pw-cat,pw-cli,wpctl
  Device-1: Qualcomm Atheros AR8162 Fast Ethernet
    vendor: Toshiba driver: alx v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 01:00.0
    chip-ID: 1969:1090 class-ID: 0200
  IF: enp1s0 state: up speed: 100 Mbps duplex: full
    mac: <filter>
  Device-2: Realtek RTL8188EE Wireless Network Adapter
    driver: rtl8188ee v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: 2000 bus-ID: 02:00.0 chip-ID: 10ec:8179
    class-ID: 0280
  IF: wlp2s0 state: down mac: <filter>
  Info: services: NetworkManager, systemd-timesyncd,
  Local Storage: total: 465.76 GiB used: 5.94 GiB (1.3%)
  SMART Message: Required tool smartctl not installed.
    Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: PNY
    model: CS900 500GB SSD size: 465.76 GiB block-size:
    physical: 512 B logical: 512 B speed: 6.0 Gb/s tech: SSD
    serial: <filter> fw-rev: 0P13 scheme: MBR
  ID-1: / raw-size: 465.76 GiB size: 465.76 GiB (100.00%)
    used: 5.94 GiB (1.3%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
  ID-2: /home raw-size: 465.76 GiB
    size: 465.76 GiB (100.00%) used: 5.94 GiB (1.3%) fs: btrfs
    dev: /dev/sda1 maj-min: 8:1
  ID-3: /var/log raw-size: 465.76 GiB
    size: 465.76 GiB (100.00%) used: 5.94 GiB (1.3%) fs: btrfs
    dev: /dev/sda1 maj-min: 8:1
  ID-4: /var/tmp raw-size: 465.76 GiB
    size: 465.76 GiB (100.00%) used: 5.94 GiB (1.3%) fs: btrfs
    dev: /dev/sda1 maj-min: 8:1
  Kernel: swappiness: 133 (default 60)
    cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.5 GiB used: 0 KiB (0.0%)
    priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842
    max-streams: 2 dev: /dev/zram0
  System Temperatures: cpu: 46.0 C mobo: N/A
  Fan Speeds (rpm): N/A
  Memory: total: 16 GiB available: 15.5 GiB
    used: 2.18 GiB (14.1%)
  Processes: 178 Power: uptime: 4m states: freeze,mem,disk
    suspend: deep avail: s2idle wakeups: 0 hibernate: platform
    avail: shutdown, reboot, suspend, test_resume
    image: 6.19 GiB Init: systemd v: 255 default: graphical
    tool: systemctl
  Packages: pm: pacman pkgs: 1223 libs: 364
    tools: octopi,pacseek,paru Compilers: gcc: 13.2.1
    Shell: garuda-inxi default: fish v: 3.7.0
    running-in: xfce4-terminal inxi: 3.3.33
Garuda (2.6.23-1):
  System install date:     2024-02-21
  Last full system update: 2024-02-21
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       <superuser required>
  Failed units:            

February .ISO was running fine until I tried to update and received this :

I just restored a good working snapshot and just held package hyprland-git back (sudo pacman -Syyu --ignore=hyprland-git) to perform the upgrade and all appears to be running fine for now. Just an informational post for anyone that IS running the February .ISO.

I’m aware that pacman is not the preferred way to update, but it’s what I’m use to and until the error get’s figured out, I can still update.

Edit in the file line 1 and 5 ####… to # ####…
2-4 comment with #
And in line 117 comment all parts for the mouse with #
Line 326, I don’t know what you have changed.


Corrected lines 1-5 with the proper commenting, commented out 117, line 321 was the actual problem, contained a ##, removed it and replaced with a single # and all is good again.

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.