Hyperland Keyboard

Issues & Assistance Hyprland
1

I have a issue with my keyboard on hyperland. works fine in kde garuda. I currently cant use underscores well - = keys shift function double quotes an the others on the right side dont work either caps lock also wont work for a brief moment when changing to a 104 key generic layout which matched kde it worked then stopped working after a few moments.
The other main problem is hitting shift or moving the mouse about randomly triggers num lock on an off i have a slightly unique numpad/arrow pad with the Cooler Master Quick Fire TK but its never had issue in other places. I should add that i can do shortcuts normally even if shift is used.

I’m just testing hyperland so deleting an reinstalling is fine i did try that once though an same issue poped up.

 garuda-inxi
System:
  Kernel: 6.6.10-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=59be197b-106f-4b13-bfe4-eb781c018f6d rw rootflags=subvol=@
    loglevel=3 mitigations=off nvidia-drm.modeset=1 ibt=off
  Desktop: Hyprland info: waybar vt: 1 dm: SDDM Distro: Garuda Linux
    base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME X570-PRO v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 4802
    date: 06/15/2023
CPU:
  Info: model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen 2 gen: 3
    level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701030
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
    L3: 32 MiB desc: 2x16 MiB
  Speed (MHz): avg: 2389 high: 3600 min/max: 2200/4426 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2200 2: 2200
    3: 2200 4: 2200 5: 3600 6: 2200 7: 2200 8: 2200 9: 3600 10: 2200 11: 2429
    12: 2200 13: 2200 14: 2200 15: 2200 16: 2200 bogomips: 115201
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: NVIDIA GM204 [GeForce GTX 980] vendor: Gigabyte driver: nvidia
    v: 545.29.06 alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current
    (as of 2023-10; EOL~2026-12-xx) arch: Maxwell code: GMxxx
    process: TSMC 28nm built: 2014-2019 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: none off: DP-2 empty: DP-1, DP-3, DVI-I-1, HDMI-A-1
    bus-ID: 0a:00.0 chip-ID: 10de:13c0 class-ID: 0300
  Display: wayland server: X.org v: 1.21.1.10 with: Xwayland v: 23.2.3
    compositor: Hyprland driver: X: loaded: nvidia unloaded: modesetting,nouveau
    alternate: fbdev,nv,vesa gpu: nvidia,nvidia-nvswitch display-ID: 1
  Monitor-1: DP-2 model: LG (GoldStar) ULTRAGEAR serial: <filter>
    built: 2020 res: 3440x1440 hz: 60 dpi: 109 gamma: 1.2 scale: 1
    size: 800x335mm (31.5x13.19") diag: 867mm (34.1") modes: max: 3440x1440
    min: 640x480
  API: Vulkan v: 1.3.274 layers: 6 device: 0 type: discrete-gpu
    name: NVIDIA GeForce GTX 980 driver: nvidia v: 545.29.06
    device-ID: 10de:13c0 surfaces: xcb,xlib,wayland device: 1 type: cpu
    name: llvmpipe (LLVM 16.0.6 256 bits) driver: mesa llvmpipe
    v: 23.3.2-arch1.2 (LLVM 16.0.6) device-ID: 10005:0000
    surfaces: xcb,xlib,wayland
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: NVIDIA GM204 High Definition Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 0a:00.1 chip-ID: 10de:0fbb class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0c:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-3: Texas Instruments PCM2900C Audio CODEC
    driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-2:3 chip-ID: 08bb:29c0 class-ID: 0300
  API: ALSA v: k6.6.10-zen1-1-zen status: kernel-api with: aoss
    type: oss-emulator tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.0.0 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel Wireless 7260 driver: iwlwifi v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 05:00.0 chip-ID: 8086:08b1 class-ID: 0280
  IF: wlp5s0 state: down mac: <filter>
  Device-2: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 06:00.0
    chip-ID: 8086:1539 class-ID: 0200
  IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
    rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 3-6:5 chip-ID: 8087:07dc
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.0
    lmp-v: 6 status: discoverable: no pairing: no class-ID: 6c0104
Drives:
  Local Storage: total: 4.68 TiB used: 17.94 GiB (0.4%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:7 vendor: Western Digital
    model: WD BLACK SN770 2TB size: 1.82 TiB block-size: physical: 512 B
    logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 731100WD temp: 45.9 C scheme: GPT
  ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: HP model: SSD EX920 1TB
    size: 953.87 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
    lanes: 4 tech: SSD serial: <filter> fw-rev: 32A0T2IA temp: 42.9 C
    scheme: GPT
  ID-3: /dev/sda maj-min: 8:0 vendor: OCZ model: VERTEX3 size: 111.79 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s tech: SSD
    serial: <filter> fw-rev: 2.22 scheme: GPT
  ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital
    model: WD20EZAZ-00L9GB0 size: 1.82 TiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
    fw-rev: 0A80 scheme: GPT
Partition:
  ID-1: / raw-size: 126.7 GiB size: 126.7 GiB (100.00%) used: 17.6 GiB (13.9%)
    fs: btrfs dev: /dev/nvme1n1p6 maj-min: 259:6
  ID-2: /boot/efi raw-size: 498 MiB size: 497 MiB (99.80%)
    used: 346.1 MiB (69.6%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:8
  ID-3: /home raw-size: 126.7 GiB size: 126.7 GiB (100.00%)
    used: 17.6 GiB (13.9%) fs: btrfs dev: /dev/nvme1n1p6 maj-min: 259:6
  ID-4: /var/log raw-size: 126.7 GiB size: 126.7 GiB (100.00%)
    used: 17.6 GiB (13.9%) fs: btrfs dev: /dev/nvme1n1p6 maj-min: 259:6
  ID-5: /var/tmp raw-size: 126.7 GiB size: 126.7 GiB (100.00%)
    used: 17.6 GiB (13.9%) fs: btrfs dev: /dev/nvme1n1p6 maj-min: 259:6
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 15.52 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 36.0 C mobo: 38.0 C
  Fan Speeds (rpm): N/A
Info:
  Processes: 343 Uptime: 2m wakeups: 0 Memory: total: 16 GiB
  available: 15.52 GiB used: 1.93 GiB (12.5%) Init: systemd v: 255
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
  Packages: pm: pacman pkgs: 1632 libs: 516 tools: octopi,paru Shell: fish
  v: 3.7.0 running-in: foot inxi: 3.3.31
Garuda (2.6.22-1):
  System install date:     2024-01-06
  Last full system update: 2024-01-06
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut nvidia-dkms
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:
2

Whats you kbd layout in hyprland.conf?

# For all categories, see https://wiki.hyprland.org/Configuring/Variables/
input {
    kb_layout = de
    kb_variant =
    kb_model =
    kb_options =
    kb_rules =
    #numlock_by_default= true
    follow_mouse = 1

touchpad {
    natural_scroll = true
    tap-to-click = true
    disable_while_typing = true
}
3 
# For all categories, see https://wiki.hyprland.org/Configuring/Variables/
input {
kb_layout = us
    kb_variant =
    kb_model =
    kb_options =
    kb_rules =
    numlock_by_default= true
    follow_mouse = 1

touchpad {
    natural_scroll = true
    tap-to-click = true
    disable_while_typing = true
}
4

Did you check?

6

I checked, set numlock to false an tried one of the alt-intl variants no luck. the only think i can think to do is when i have time try an make a model layout and try that.