Hello garuda community, I install garuda dragonized gaming edition just yesterday. When i update the system with garuda-update my system get froze and last thing i see at terminal is Reloading device manager configuration... . Also i cant open steam (or reinstall because of freeze problem)
here is my garuda-inxi
╰─λ garuda-inxi
System:
Kernel: 6.16.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=92ad1467-736c-48f6-a826-6834f8d20674 rw rootflags=subvol=@
quiet resume=UUID=55cc0ff5-fa35-4c91-8b62-65b8c3ae6768 loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.4.4 tk: Qt v: N/A info: frameworks v: 6.17.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: HP product: Victus by HP Gaming Laptop 16-r0xxx
v: Type1ProductConfigId serial: <superuser required> Chassis: type: 10
serial: <superuser required>
Mobo: HP model: 8BBE v: 77.52 serial: <superuser required>
part-nu: 8V898EA#AB8 uuid: <superuser required> UEFI: Insyde v: F.26
date: 02/04/2025
Battery:
ID-1: BAT1 charge: 54.2 Wh (100.0%) condition: 54.2/70.1 Wh (77.4%)
volts: 17.0 min: 15.4 model: 333-AC-4B-A WK04070XL type: Li-ion
serial: <filter> status: full
CPU:
Info: model: 13th Gen Intel Core i7-13700H bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xBA (186) stepping: 2
microcode: 0x4129
Topology: cpus: 1x dies: 1 clusters: 8 cores: 14 threads: 20 mt: 6 tpc: 2
st: 8 smt: enabled cache: L1: 1.2 MiB desc: d-8x32 KiB, 6x48 KiB; i-6x32
KiB, 8x64 KiB L2: 11.5 MiB desc: 6x1.2 MiB, 2x2 MiB L3: 24 MiB
desc: 1x24 MiB
Speed (MHz): avg: 492 min/max: 400/4800:5000:3700 scaling:
driver: intel_pstate governor: powersave cores: 1: 492 2: 492 3: 492 4: 492
5: 492 6: 492 7: 492 8: 492 9: 492 10: 492 11: 492 12: 492 13: 492 14: 492
15: 492 16: 492 17: 492 18: 492 19: 492 20: 492 bogomips: 116736
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: Hewlett-Packard
driver: i915 v: kernel alternate: xe arch: Xe process: Intel 7 (10nm)
built: 2022+ ports: active: eDP-1 empty: DP-1 bus-ID: 00:02.0
chip-ID: 8086:a7a0 class-ID: 0300
Device-2: NVIDIA AD106M [GeForce RTX 4070 Max-Q / Mobile]
vendor: Hewlett-Packard driver: nouveau v: kernel non-free: 550-570.xx+
status: current (as of 2025-04) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 8
ports: active: none empty: HDMI-A-1 bus-ID: 01:00.0 chip-ID: 10de:2820
class-ID: 0300
Device-3: Luxvisions Innotech HP True Vision FHD Camera driver: uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:3
chip-ID: 30c9:00c9 class-ID: fe01 serial: <filter>
Display: wayland server: X.org v: 1.21.1.18 with: Xwayland v: 24.1.8
compositor: kwin_wayland driver: X: loaded: modesetting
alternate: fbdev,intel,nouveau,nv,vesa dri: iris gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: ChiMei InnoLux 0x162e built: 2022 res:
mode: 1920x1080 hz: 144 scale: 100% (1) dpi: 137 gamma: 1.2
size: 355x199mm (13.98x7.83") diag: 407mm (16") ratio: 16:9
modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris platforms: device: 1 drv: iris
device: 2 drv: swrast gbm: drv: kms_swrast surfaceless: drv: iris wayland:
drv: iris x11: drv: iris inactive: device-0
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 25.1.7-arch1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel Iris Xe Graphics (RPL-P)
device-ID: 8086:a7a0 memory: 30.3 GiB unified: yes display-ID: :1.0
API: Vulkan v: 1.4.321 layers: 9 device: 0 type: integrated-gpu name: Intel
Iris Xe Graphics (RPL-P) driver: mesa intel v: 25.1.7-arch1.1
device-ID: 8086:a7a0 surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 20.1.8 256 bits) driver: mesa llvmpipe v: 25.1.7-arch1.1 (LLVM
20.1.8) device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: corectrl wl: wayland-info
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel Raptor Lake-P/U/H cAVS vendor: Hewlett-Packard
driver: sof-audio-pci-intel-tgl alternate: snd_hda_intel, snd_soc_avs,
snd_sof_pci_intel_tgl bus-ID: 00:1f.3 chip-ID: 8086:51ca class-ID: 0401
Device-2: NVIDIA AD106M High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 8
bus-ID: 01:00.1 chip-ID: 10de:22bd class-ID: 0403
API: ALSA v: k6.16.1-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.4.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Hewlett-Packard driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter
vendor: AzureWave driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s
lanes: 1 bus-ID: 04:00.0 chip-ID: 14c3:7961 class-ID: 0280
IF: wlo1 state: up mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: IMC Networks Wireless_Device driver: btusb v: 0.8 type: USB
rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-10:4
chip-ID: 13d3:3567 class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: N/A
Drives:
Local Storage: total: 2.75 TiB used: 16.7 GiB (0.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Crucial model: CT2000P310SSD8
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: V8CR001 temp: 38.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: MZVL81T0HELB-00BH1
size: 953.87 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.2 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter>
fw-rev: 1.00 scheme: GPT
Partition:
ID-1: / raw-size: 1.79 TiB size: 1.79 TiB (100.00%) used: 16.7 GiB (0.9%)
fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 620 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 16.7 GiB (0.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 16.7 GiB (0.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 1.79 TiB size: 1.79 TiB (100.00%)
used: 16.7 GiB (0.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.03 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
ID-2: swap-2 type: partition size: 34.13 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
System Temperatures: cpu: 48.0 C mobo: N/A
Fan Speeds (rpm): cpu: 0 fan-2: 0
Info:
Memory: total: 32 GiB note: est. available: 31.03 GiB used: 2.4 GiB (7.7%)
Processes: 395 Power: uptime: 1m states: freeze,mem,disk suspend: s2idle
avail: deep wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.38 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 1749 libs: 511 tools: octopi,paru Compilers:
clang: 20.1.8 gcc: 15.2.1 Shell: Bash v: 5.3.3 default: fish v: 4.0.2
running-in: konsole inxi: 3.3.38
Garuda (2.7.5-1):
System install date: 2025-08-16
Last full system update: 2025-08-17
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units:
--- System Health Check Report ---
20/21 checks run in 0.56 seconds ⌛
Powered by garuda-health 🦅
✅ System health check passed. No issues found.
here is my pacman -Qs nvidia
🔴] × pacman -Qs nvidia
local/lib32-libvdpau 1.5-3
Nvidia VDPAU library
local/libvdpau 1.5-3
Nvidia VDPAU library
local/linux-firmware-nvidia 20250808-1
Firmware files for Linux - Firmware for NVIDIA GPUs and SoCs
there must be more i guess
and there somethings i tried
sudo pacman -S garuda-hardware-profile-nvidia
[sudo] password for halidoprime:
resolving dependencies...
looking for conflicting packages...
warning: dependency cycle detected:
warning: nvidia-utils will be installed before its egl-wayland dependency
warning: dependency cycle detected:
warning: egl-gbm will be installed before its eglexternalplatform dependency
warning: dependency cycle detected:
warning: egl-x11 will be installed before its eglexternalplatform dependency
Package (14) New Version Net Change
extra/dkms 3.2.1-1 0,15 MiB
extra/egl-gbm 1.1.2.1-1 0,03 MiB
extra/egl-wayland 4:1.1.20-1 0,10 MiB
extra/egl-x11 1.0.3-1 0,14 MiB
extra/eglexternalplatform 1.2.1-1 0,02 MiB
multilib/lib32-nvidia-utils 580.76.05-1 276,65 MiB
multilib/lib32-opencl-nvidia 580.76.05-1 21,86 MiB
extra/libxnvctrl 580.76.05-1 0,45 MiB
extra/nvidia-open-dkms 580.76.05-4 119,18 MiB
extra/nvidia-prime 1.0-5 0,00 MiB
extra/nvidia-settings 580.76.05-1 1,54 MiB
extra/nvidia-utils 580.76.05-4 886,10 MiB
extra/opencl-nvidia 580.76.05-4 85,55 MiB
garuda/garuda-hardware-profile-nvidia 1.1.1-2 0,00 MiB
Total Installed Size: 1391,74 MiB
:: Proceed with installation? [Y/n] y
(14/14) checking keys in keyring [------------------------------------] 100%
(14/14) checking package integrity [------------------------------------] 100%
(14/14) loading package files [------------------------------------] 100%
(14/14) checking for file conflicts [------------------------------------] 100%
error: failed to commit transaction (conflicting files)
opencl-nvidia: /etc/OpenCL/vendors/nvidia.icd exists in filesystem
Errors occurred, no packages were upgraded.
[🔴] × sudo pacman -Rdd nvidia-open-dkms nvidia-settings nvidia-utils opencl-nvidia libxnvctrl lib32-nvidia-utils lib32-opencl-nvidia gwe python-py3nvml nvidia-prime
error: target not found: nvidia-open-dkms
error: target not found: nvidia-settings
error: target not found: nvidia-utils
error: target not found: opencl-nvidia
error: target not found: libxnvctrl
error: target not found: lib32-nvidia-utils
error: target not found: lib32-opencl-nvidia
error: target not found: gwe
error: target not found: python-py3nvml
error: target not found: nvidia-prime
i used garuda for 1 year and it was a great experience. i change my ssd and install garuda again but idk what to do now.
this is first time im using a forum, sorry for if i say or do something wrong
