How i can use the "install website" function in hyprland?

korobert · 26 January 2024 21:00

Hi.

I don’t know how exactly call this when you can install a website to a separate web browser window. See picture below.
2024-01-26T20:39:28,173780716+00:00

I used few website in KDE pin to the taskbar, but in hyprland i cant see where is te link after install and how can i use it?

Thank you
inxi:

╰─λ garuda-inxi
System:
  Kernel: 6.7.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=095c9f1d-4e23-42b2-aa42-36402880711e rw rootflags=subvol=@
    quiet resume=UUID=4b8a0d61-7df0-445b-9329-0c5cf2f2c346 loglevel=3
    ibt=off
  Desktop: Hyprland info: waybar vt: 1 dm: SDDM Distro: Garuda Linux
    base: Arch Linux
Machine:
  Type: Laptop System: Dell product: Vostro 3580 v: N/A
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Dell model: 0PMTCG v: A00 serial: <superuser required> UEFI: Dell
    v: 1.27.0 date: 11/16/2023
Battery:
  ID-1: BAT0 charge: 4.2 Wh (14.3%) condition: 29.3/42.0 Wh (69.8%)
    volts: 11.7 min: 11.4 model: BYD DELL 1VX1H97 type: Li-ion serial: <filter>
    status: charging
  Device-1: hidpp_battery_0 model: Logitech Wireless Keyboard
    serial: <filter> charge: 55% (should be ignored) rechargeable: yes
    status: discharging
CPU:
  Info: model: Intel Core i5-8265U bits: 64 type: MT MCP
    arch: Comet/Whiskey Lake note: check gen: core 8 level: v3 note: check
    built: 2018 process: Intel 14nm family: 6 model-id: 0x8E (142)
    stepping: 0xC (12) microcode: 0xF8
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 2280 high: 3252 min/max: 400/3900 scaling:
    driver: intel_pstate governor: performance cores: 1: 3252 2: 3090 3: 400
    4: 2719 5: 2890 6: 400 7: 3075 8: 2414 bogomips: 28800
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Vulnerabilities: <filter>
Graphics:
  Device-1: Intel WhiskeyLake-U GT2 [UHD Graphics 620] vendor: Dell
    driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
    ports: active: HDMI-A-1,eDP-1 empty: DP-1,HDMI-A-2 bus-ID: 0000:00:02.0
    chip-ID: 8086:3ea0 class-ID: 0300
  Device-2: Sunplus Innovation Integrated_Webcam_HD driver: uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-6:3
    chip-ID: 1bcf:2b98 class-ID: 0e02
  Display: wayland server: X.org v: 1.21.1.11 with: Xwayland v: 23.2.4
    compositor: Hyprland driver: X: loaded: modesetting
    alternate: fbdev,intel,vesa dri: iris gpu: i915 d-rect: 4480x1080
    display-ID: 1
  Monitor-1: HDMI-A-1 pos: right model: LG (GoldStar) ULTRAWIDE
    serial: <filter> built: 2014 res: 2560x1080 hz: 60 dpi: 112 gamma: 1.2
    scale: 1 size: 677x290mm (26.65x11.42") diag: 628mm (24.7") modes:
    max: 2560x1080 min: 720x400
  Monitor-2: eDP-1 pos: primary,left model: AU Optronics 0x38ed built: 2015
    res: 1920x1080 hz: 60 dpi: 142 gamma: 1.2 scale: 1
    size: 344x193mm (13.54x7.6") diag: 394mm (15.5") ratio: 16:9
    modes: 1920x1080
  API: Vulkan v: 1.3.274 layers: 3 device: 0 type: integrated-gpu
    name: Intel UHD Graphics 620 (WHL GT2) driver: mesa intel v: 23.3.3-arch1.1
    device-ID: 8086:3ea0 surfaces: xcb,xlib,wayland device: 1 type: cpu
    name: llvmpipe (LLVM 16.0.6 256 bits) driver: mesa llvmpipe
    v: 23.3.3-arch1.1 (LLVM 16.0.6) device-ID: 10005:0000
    surfaces: xcb,xlib,wayland
  API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
  Device-1: Intel Cannon Point-LP High Definition Audio vendor: Dell
    driver: snd_hda_intel v: kernel
    alternate: snd_soc_skl,snd_sof_pci_intel_cnl bus-ID: 0000:00:1f.3
    chip-ID: 8086:9dc8 class-ID: 0403
  API: ALSA v: k6.7.1-zen1-1-zen status: kernel-api tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.0.1 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Dell driver: r8169 v: kernel port: 3000 bus-ID: 0000:01:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp1s0 state: down mac: <filter>
  Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
    vendor: Dell driver: ath10k_pci v: kernel bus-ID: 0000:02:00.0
    chip-ID: 168c:0042 class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  IF-ID-1: wguk131t state: unknown speed: N/A duplex: N/A mac: N/A
Bluetooth:
  Device-1: Qualcomm Atheros driver: btusb v: 0.8 type: USB rev: 2.0
    speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-10:4 chip-ID: 0cf3:e009
    class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
    rfk-block: hardware: no software: yes address: <filter> bt-v: 4.2 lmp-v: 8
    status: discoverable: no pairing: no
RAID:
  Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode]
    driver: intel_nvme_remap v: N/A port: 4060 bus-ID: 0000:00:17.0
    chip-ID: 8086:282a rev: N/A class-ID: 0104
Drives:
  Local Storage: total: 1.36 TiB used: 10.03 GiB (0.7%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba
    model: KBG40ZNS256G NVMe 256GB size: 238.47 GiB block-size: physical: 512 B
    logical: 512 B tech: SSD serial: <filter> fw-rev: 10410106 temp: 25.9 C
    scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: A-Data model: SU630 size: 223.57 GiB
    block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s tech: SSD
    serial: <filter> fw-rev: 3R17 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Samsung model: ST1000LM 024 HN-M101M
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B type: USB
    rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A
    serial: <filter> fw-rev: 2AR2 scheme: MBR
Partition:
  ID-1: / raw-size: 60 GiB size: 60 GiB (100.00%) used: 7.6 GiB (12.7%)
    fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 584 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-3: /home raw-size: 162.16 GiB size: 162.16 GiB (100.00%)
    used: 2.42 GiB (1.5%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:4
  ID-4: /var/log raw-size: 60 GiB size: 60 GiB (100.00%)
    used: 7.6 GiB (12.7%) fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
  ID-5: /var/tmp raw-size: 60 GiB size: 60 GiB (100.00%)
    used: 7.6 GiB (12.7%) fs: btrfs dev: /dev/nvme0n1p3 maj-min: 259:3
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
    zswap: no
  ID-1: swap-1 type: zram size: 7.63 GiB used: 51.5 MiB (0.7%)
    priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8
    dev: /dev/zram0
  ID-2: swap-2 type: partition size: 16.01 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/nvme0n1p5 maj-min: 259:5
Sensors:
  System Temperatures: cpu: 66.0 C pch: 61.0 C mobo: 49.0 C
  Fan Speeds (rpm): cpu: 2666
Info:
  Processes: 303 Uptime: 31m wakeups: 0 Memory: total: 8 GiB
  available: 7.63 GiB used: 4.78 GiB (62.7%) Init: systemd v: 255
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages:
  pm: pacman pkgs: 1423 libs: 411 tools: paru Shell: fish v: 3.7.0
  running-in: foot inxi: 3.3.31
Garuda (2.6.22-1):
  System install date:     2024-01-21
  Last full system update: 2024-01-26
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:   ```

SGS · 26 January 2024 21:12

I think it is not possible in Hyprland.
Help for Hyprland is the Wiki page, here the waybar

korobert · 26 January 2024 21:34

Thanks, i will try find different solution.

Yada · 27 January 2024 07:49

I don’t know if I understood you or not. I think the equivalent to pinning to status bar for me is using the ‘special workspaces’

###P.Sepcial Workspace
bind = $mainMod_SHIFT, minus, movetoworkspace, special
bind = $mainMod, minus, togglespecialworkspace

korobert · 27 January 2024 15:41

I mean, next to the link on the right has a small icon. ( i post picture in the first comment ) click on it you will get a separate icon and this will always open only that website where you “installed”.

Anyway i want to try this. I pasted it to my hyprland.conf, ~~but nothing happening.~~ My bad i press a wrong button

Yada · 27 January 2024 15:54

Umm, probably because of $mainMod_SHIFT, you have to name it according to your ModKey – thats basically how mine looks, and you can create several of them.

While it won’t work like your status bar toggle… it will always bring up the window you move to it, and you can have several of them

– Think of it like scratchpad on i3, but you can have several of them.

Ps. May not be what you are looking for exactly but I kinda use it that way.

korobert · 27 January 2024 17:05

It is working now. this is a really useful feature!
In brave if you click on this button you may now what i mean.

Unfortunately in floorp i cant see this option.

i dont use i3…

system · 10 February 2024 17:05

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.