How can i install anaconda nucluse in my garuda kde

[🔴] × inxi -Faz
System:
Kernel: 5.15.12-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=90452c6f-be56-4561-bb42-7cb24e74750f rw rootflags=subvol=@
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=e1e75ed3-0e8e-4924-8b82-5fe9aa4b5ea2 loglevel=3
Desktop: KDE Plasma 5.23.5 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: Acer product: Aspire A315-22 v: V1.09
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: SR model: Rose_SR v: V1.09 serial: <superuser required>
UEFI: Phoenix v: 1.09 date: 05/15/2020
Battery:
ID-1: BAT0 charge: 5.9 Wh (18.3%) condition: 32.2/36.7 Wh (87.6%)
volts: 12.0 min: 11.3 model: LGC AC14B18J type: Li-ion serial: <filter>
status: Charging cycles: 222
CPU:
Info: model: AMD A4-9120e RADEON R3 4 COMPUTE CORES 2C+2G bits: 64
type: MCP arch: Excavator family: 0x15 (21) model-id: 0x70 (112)
stepping: 0 microcode: 0x6006705
Topology: cpus: 1x cores: 2 smt: <unsupported> cache: L1: 192 KiB
desc: d-2x32 KiB; i-2x64 KiB L2: 2 MiB desc: 2x1024 KiB
Speed (MHz): avg: 1330 high: 1673 min/max: 1100/1500 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 1673 2: 987
bogomips: 5988
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Stoney [Radeon R2/R3/R4/R5 Graphics]
vendor: Acer Incorporated ALI driver: amdgpu v: kernel bus-ID: 00:01.0
chip-ID: 1002:98e4 class-ID: 0300
Device-2: Quanta VGA WebCam type: USB driver: uvcvideo bus-ID: 2-4:2
chip-ID: 0408:a031 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org 1.21.1.3 compositor: kwin_x11 driver:
loaded: amdgpu,ati unloaded: modesetting alternate: fbdev,vesa
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP res: 1920x1080 hz: 60 dpi: 142 size: 344x193mm (13.5x7.6")
diag: 394mm (15.5")
OpenGL: renderer: AMD STONEY (DRM 3.42.0 5.15.12-zen1-1-zen LLVM 13.0.0)
v: 4.5 Mesa 21.3.3 direct render: Yes
Audio:
Device-1: AMD vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel
bus-ID: 00:01.1 chip-ID: 1002:15b3 class-ID: 0403
Device-2: AMD Family 15h Audio vendor: Acer Incorporated ALI
driver: snd_hda_intel v: kernel bus-ID: 00:09.2 chip-ID: 1022:157a
class-ID: 0403
Sound Server-1: ALSA v: k5.15.12-zen1-1-zen running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Acer Incorporated ALI driver: r8169 v: kernel port: 1000
bus-ID: 01:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp1s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Device-2: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter
vendor: Lite-On driver: ath10k_pci v: kernel bus-ID: 02:00.0
chip-ID: 168c:0042 class-ID: 0280
IF: wlp2s0 state: up mac: <filter>
Bluetooth:
Device-1: Lite-On Qualcomm Atheros QCA9377 Bluetooth type: USB
driver: btusb v: 0.8 bus-ID: 1-1.1:3 chip-ID: 04ca:3015 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 1.03 TiB used: 21.01 GiB (2.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Acer model: SSD FA100 128GB
size: 119.24 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: 1.Z.J.2X
temp: 25.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Toshiba model: MQ04ABF100
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
speed: 3.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 1J scheme: GPT
Partition:
ID-1: / raw-size: 200 GiB size: 200 GiB (100.00%) used: 20.98 GiB (10.5%)
fs: btrfs dev: /dev/sda4 maj-min: 8:4
ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
used: 31.9 MiB (33.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 200 GiB size: 200 GiB (100.00%)
used: 20.98 GiB (10.5%) fs: btrfs dev: /dev/sda4 maj-min: 8:4
ID-4: /var/log raw-size: 200 GiB size: 200 GiB (100.00%)
used: 20.98 GiB (10.5%) fs: btrfs dev: /dev/sda4 maj-min: 8:4
ID-5: /var/tmp raw-size: 200 GiB size: 200 GiB (100.00%)
used: 20.98 GiB (10.5%) fs: btrfs dev: /dev/sda4 maj-min: 8:4
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.17 GiB used: 2.5 MiB (0.0%) priority: 100
dev: /dev/zram0
ID-2: swap-2 type: partition size: 16 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3
Sensors:
System Temperatures: cpu: 60.0 C mobo: N/A gpu: amdgpu temp: 60.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 227 Uptime: 12m wakeups: 9 Memory: 7.17 GiB
used: 2.51 GiB (35.0%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.1.0 clang: 13.0.0 Packages: pacman: 1817 lib: 546 Shell: fish
v: 3.3.1 default: Bash v: 5.1.12 running-in: konsole inxi: 3.3.11
McFly: Upgrading McFly DB to version 3, please wait...thread 'main' panicked at 'McFly error: Unable to add cmd_tpl to commands (duplicate column name: cmd_tpl)', src/history/schema.rs:41:17
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace

how can i download anaconda python in garuda linux please help me

Same as before. Learn to search.
There is an AUR package

But the comments seem to report several problems and the package is flagged out of date.
And this is the version upstream
https://repo.anaconda.com/archive/Anaconda3-2021.11-Linux-x86_64.sh
Careful, python 3.9.

Please do not post in inxi category. This is only meant to keep your inxi there, and reference it in other posts.

7 Likes