HiDPI on Wayfire - Garuda Welcome Settings

As I can can not determine whether or not the script

> /usr/share/garudawelcome/scripts/hidpi-on.sh

will work as intended when the following syntax error occurs

> ❯ sudo /usr/share/garudawelcome/scripts/hidpi-on.sh
> [sudo] password for eljejer:
> /usr/share/garudawelcome/scripts/hidpi-on.sh: line 7: xdpyinfo: command not found
> (standard_in) 1: syntax error
> (standard_in) 1: syntax error
> which: no kwriteconfig5 in (/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl)
> which: no xfconf-query in (/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl)
> 
> (process:20727): dconf-WARNING **: 15:46:39.865: failed to commit changes to dconf: Error spawning command line “dbus-launch --autolaunch=526c97c3a1da41b0bac8037758a1eebd --binary-syntax --close-stderr”: Child process exited with code 1
> find: ‘/root/.mozilla/firefox’: No such file or directory
> which: no thunderbird in (/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl)

I just thought to report it here.

 xdpyinfo | grep dots | grep -o -P '.{0,4}x' | sed 's/x//g'
 162

Work here :slight_smile:
As always, your

 inxi -Fxxxza

use </> please

>  ❯ inxi -Fxxxza
> System:    Kernel: 5.8.14-zen1-1-zen x86_64 bits: 64 compiler: N/A
>            parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen root=UUID=dafae0ea-1313-483b-9e2d-71e2634298ef rw
>            [email protected] quiet splash loglevel=3 modprobe.blacklist=nouveau ipv6.disable=1
>            Desktop: N/A wm: wlroots wm dm: N/A Distro: Garuda Linux
> Machine:   Type: Convertible System: HP product: HP Spectre x360 Convertible 15-ch0xx v: N/A serial: <filter>
>            Chassis: type: 31 serial: <filter>
>            Mobo: HP model: 83BA v: 57.33 serial: <filter> UEFI: AMI v: F.30 date: 03/07/2019
> Battery:   ID-1: BAT0 charge: 75.4 Wh condition: 77.6/77.6 Wh (100%) volts: 13.2/11.6 model: HP Primary
>            type: Li-ion serial: N/A status: Charging
>            Device-1: hid-0018:04F3:25BF.0001-battery model: ELAN2514:00 04F3:25BF serial: N/A charge: N/A
>            status: N/A
> CPU:       Info: Quad Core model: Intel Core i7-8550U bits: 64 type: MT MCP arch: Kaby Lake family: 6
>            model-id: 8E (142) stepping: A (10) microcode: D6 L2 cache: 8192 KiB
>            flags: avx avx2 lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 31999
>            Speed: 1711 MHz min/max: 400/1800 MHz Core speeds (MHz): 1: 1711 2: 1654 3: 1664 4: 1752 5: 1715 6: 1795
>            7: 1777 8: 1757
>            Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
>            Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
>            Type: mds mitigation: Clear CPU buffers; SMT vulnerable
>            Type: meltdown mitigation: PTI
>            Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via prctl and seccomp
>            Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
>            Type: spectre_v2
>            mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW, STIBP: conditional, RSB filling
>            Type: srbds mitigation: Microcode
>            Type: tsx_async_abort status: Not affected
> Graphics:  Device-1: Intel UHD Graphics 620 vendor: Hewlett-Packard driver: i915 v: kernel bus ID: 00:02.0
>            chip ID: 8086:5917
>            Device-2: NVIDIA GP108M [GeForce MX150] vendor: Hewlett-Packard driver: N/A alternate: nouveau
>            bus ID: 01:00.0 chip ID: 10de:1d10
>            Device-3: Quanta HP Wide Vision FHD Camera type: USB driver: uvcvideo bus ID: 1-5:2 chip ID: 0408:5251
>            serial: <filter>
>            Display: wayland server: N/A compositor: wayfire driver: N/A note: display driver n/a display ID: 0
>            resolution: <xdpyinfo missing>
>            Message: Unable to show advanced data. Required tool glxinfo missing.
> Audio:     Device-1: Intel Sunrise Point-LP HD Audio vendor: Hewlett-Packard driver: snd_hda_intel v: kernel
>            alternate: snd_soc_skl bus ID: 00:1f.3 chip ID: 8086:9d71
>            Sound Server: ALSA v: k5.8.14-zen1-1-zen
> Network:   Device-1: Intel Wireless-AC 9260 driver: iwlwifi v: kernel port: e000 bus ID: 3b:00.0 chip ID: 8086:2526
>            IF: wlo1 state: up mac: <filter>
>            Device-2: Intel Wireless-AC 9260 Bluetooth Adapter type: USB driver: btusb bus ID: 1-7:3
>            chip ID: 8087:0025
> Drives:    Local Storage: total: 476.94 GiB used: 304.97 GiB (63.9%)
>            SMART Message: Required tool smartctl not installed. Check --recommends
>            ID-1: /dev/nvme0n1 vendor: Toshiba model: N/A size: 476.94 GiB block size: physical: 512 B
>            logical: 512 B speed: 31.6 Gb/s lanes: 4 serial: <filter> rev: AAHA4102 scheme: GPT
> Partition: ID-1: / raw size: 476.64 GiB size: 476.64 GiB (100.00%) used: 304.97 GiB (64.0%) fs: btrfs
>            dev: /dev/nvme0n1p2
>            ID-2: /home raw size: 476.64 GiB size: 476.64 GiB (100.00%) used: 304.97 GiB (64.0%) fs: btrfs
>            dev: /dev/nvme0n1p2
>            ID-3: /var/log raw size: 476.64 GiB size: 476.64 GiB (100.00%) used: 304.97 GiB (64.0%) fs: btrfs
>            dev: /dev/nvme0n1p2
> Swap:      Kernel: swappiness: 10 (default 60) cache pressure: 75 (default 100)
>            ID-1: swap-1 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram0
>            ID-2: swap-2 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram1
>            ID-3: swap-3 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram2
>            ID-4: swap-4 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram3
>            ID-5: swap-5 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram4
>            ID-6: swap-6 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram5
>            ID-7: swap-7 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram6
>            ID-8: swap-8 type: zram size: 496.4 MiB used: 0 KiB (0.0%) priority: 32767 dev: /dev/zram7
> Sensors:   System Temperatures: cpu: 51.0 C mobo: N/A
>            Fan Speeds (RPM): N/A
> Info:      Processes: 303 Uptime: 1h 03m Memory: 15.51 GiB used: 2.64 GiB (17.0%) Init: systemd v: 246 Compilers:
>            gcc: 10.2.0 Packages: pacman: 1112 lib: 287 Shell: Zsh v: 5.8 running in: alacritty inxi: 3.1.06

Xorg is not installed on this Wayland installation and xdpyinfo is a Xorg utility

1 Like
pacman -Qi xorg-xdpyinfo
Name                     : xorg-xdpyinfo
Version                  : 1.3.2-4
Beschreibung             : Display information utility for X
Architektur              : x86_64
URL                      : https://xorg.freedesktop.org/
Lizenzen                 : custom
Gruppen                  : xorg-apps  xorg
Stellt bereit            : Nichts
Hängt ab von             : libx11  libxext  libxtst  libxxf86vm  libxrender  libxcomposite  libxinerama
Optionale Abhängigkeiten : Nichts
Benötigt von             : autorandr
Optional für             : inxi  neofetch-git
In Konflikt mit          : Nichts
Ersetzt                  : Nichts
Installationsgröße       : 33,04 KiB
Packer                   : Evangelos Foutras <[email protected]>
Erstellt am              : Sa 16 Mai 2020 15:44:48 CEST
Installiert am           : Mo 13 Jul 2020 13:20:19 CEST
Installationsgrund       : Installiert als Abhängigkeit für ein anderes Paket
Installations-Skript     : Nein
Verifiziert durch        : Signatur

install xorg-xdpyinfo, please :slight_smile:

But wayland is @librewish gaming place and wayland is more like beta software? :wink:

Problem solved! Thanks.
So I can just use this xdpyinfo without installing complete Xorg? Nice!
It is because my hybrid laptop performs so much better on Wayland as opposed to Xorg, that I decided to go for this beta software :slight_smile:

1 Like

Beta? no...say rather in active development. Wayland has been around about ten years, just was mostly sidelined most of that time :slight_smile: It's definitely improving now...the major hangup is the lack of open drivers from Nvidia (imo). It's only now getting enough exposure to different hardware because a few desktops (including Gnome) are using it by default, to be truly debugged. I like it and hope that the next six months will see major improvements.

My English is bad so I say beta and add ? :wink: behind.

:crossed_fingers:

Your English is NOT bad, a lot better than any of my non-English (only know Spanish besides). :slight_smile:

1 Like