garuda-inxi
System:
Kernel: 6.5.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=6735b058-6cf3-4b60-a691-f9df195d7b25 rw rootflags=subvol=@
quiet rd.luks.uuid=8fce33c5-e307-49a5-b08e-5d3c56ad2dcf quiet
rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3 ibt=off
Desktop: GNOME v: 45.0 tk: GTK v: 3.24.38 wm: gnome-shell dm: GDM
v: 45.0.1 Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: Micro product: G510 v: 1.0
serial: <superuser required>
Mobo: ASUSTeK model: PRIME B550M-A AC v: Rev X.0x
serial: <superuser required> BIOS: American Megatrends v: 2006
date: 03/19/2021
CPU:
Info: model: AMD Ryzen 5 5600X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 0 microcode: 0xA201009
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 3672 high: 3700 min/max: 2200/4650 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 3700 2: 3589
3: 3700 4: 3591 5: 3700 6: 3700 7: 3700 8: 3700 9: 3700 10: 3593 11: 3700
12: 3700 bogomips: 88628
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
vendor: Tul / PowerColor driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: DP-3 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 0d:00.0
chip-ID: 1002:73df class-ID: 0300
Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.2.1
compositor: gnome-shell driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: DP-3 model: ASUS VG32VQ1B serial: <filter> built: 2020
res: 2560x1440 dpi: 93 gamma: 1.2 size: 697x392mm (27.44x15.43")
diag: 800mm (31.5") ratio: 16:9 modes: max: 2560x1440 min: 720x400
API: Vulkan v: 1.3.264 layers: 3 device: 0 type: discrete-gpu name: AMD
Radeon RX 6700 XT (RADV NAVI22) driver: mesa radv v: 23.2.1-arch1.2
device-ID: 1002:73df surfaces: xcb,xlib,wayland device: 1 type: cpu
name: llvmpipe (LLVM 16.0.6 256 bits) driver: mesa llvmpipe
v: 23.2.1-arch1.2 (LLVM 16.0.6) device-ID: 10005:0000
surfaces: xcb,xlib,wayland
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0d:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0f:00.4 chip-ID: 1022:1487 class-ID: 0403
API: ALSA v: k6.5.8-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.83 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: ASUSTeK driver: rtw_8821ce v: N/A modules: rtw88_8821ce pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 09:00.0 chip-ID: 10ec:c821
class-ID: 0280
IF: wlp9s0 state: down mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 0a:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp10s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: ASUSTek Bluetooth Radio driver: btusb v: 0.8 type: USB rev: 1.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-5:4 chip-ID: 0b05:18ea
class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: disabled
rfk-block: hardware: no software: no address: N/A
Drives:
Local Storage: total: 1.82 TiB used: 468.51 GiB (25.1%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 2B2QEXM7 temp: 38.9 C scheme: MBR
Partition:
ID-1: / raw-size: 1.82 TiB size: 1.82 TiB (100.00%) used: 468.51 GiB (25.1%)
fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-8fce33c5-e307-49a5-b08e-5d3c56ad2dcf
ID-2: /home raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 468.51 GiB (25.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-8fce33c5-e307-49a5-b08e-5d3c56ad2dcf
ID-3: /var/log raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 468.51 GiB (25.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-8fce33c5-e307-49a5-b08e-5d3c56ad2dcf
ID-4: /var/tmp raw-size: 1.82 TiB size: 1.82 TiB (100.00%)
used: 468.51 GiB (25.1%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
mapped: luks-8fce33c5-e307-49a5-b08e-5d3c56ad2dcf
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 50.4 C mobo: N/A gpu: amdgpu temp: 57.0 C
mem: 40.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 1084
Info:
Processes: 396 Uptime: 4h 35m wakeups: 0 Memory: total: 32 GiB
available: 31.25 GiB used: 6.92 GiB (22.1%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1290
pm: pacman pkgs: 1235 libs: 388 tools: gnome-software,pamac,paru,yay
pm: flatpak pkgs: 55 Shell: Bash v: 5.1.16 running-in: gnome-terminal
inxi: 3.3.30
Garuda (2.6.17-1):
System install date: 2023-07-22
Last full system update: 2023-10-23
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: <superuser required>
Failed units:
The keys that I noticed missing are the super-left & right window tiling keys. Some of the other keys, like the workspace switching keys still work.
What is the process to restore the default shortcuts for gnome? Or, what is the process to add the window tiling (left and right) shortcuts (as those are the only ones that I use)?
Thanks,
rodney