Garude Gnome 220101 Gestures

Garuda gnome 220101: I can use gestures by default on fresh install. I can pinch to see my open applications and three finger swipe up to change desktops by default. Where do I change this?

I tried the Mouse & Touchpad settings. I also tried the gestures app but when it opens it's blank and my gestures stop working until I remove the blank config file it creates in the ~/.config folder. I tried touchegg and configuring with touche but it says gnome is using these gestures already so I'm at a lost.

If anyone could help by pointing me in the right direction I'd be grateful.

Thanks!

System:
  Kernel: 5.16.0-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=0325cfb9-07d3-4737-9971-9c628e932a4d rw [email protected]
    quiet
    cryptdevice=UUID=c50056da-5063-4c3a-b0b9-717c9e6d570b:luks-c50056da-5063-4c3a-b0b9-717c9e6d570b
    root=/dev/mapper/luks-c50056da-5063-4c3a-b0b9-717c9e6d570b splash
    rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
  Desktop: GNOME 41.3 tk: GTK 3.24.31 wm: gnome-shell dm: GDM 41.3
    Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: LENOVO product: 82B1 v: Lenovo Legion 5 15ARH05H
    serial: <superuser required> Chassis: type: 10 v: Lenovo Legion 5 15ARH05H
    serial: <superuser required>
  Mobo: LENOVO model: LNVNB161216 v: SDK0J40709 WIN
    serial: <superuser required> UEFI: LENOVO v: FSCN18WW date: 01/01/2021
Battery:
  ID-1: BAT0 charge: 58.1 Wh (100.0%) condition: 58.1/60.0 Wh (96.9%)
    volts: 17.2 min: 15.4 model: SMP L19M4PC0 type: Li-poly serial: <filter>
    status: Full cycles: 22
CPU:
  Info: model: AMD Ryzen 7 4800H with Radeon Graphics bits: 64 type: MT MCP
    arch: Zen 2 family: 0x17 (23) model-id: 0x60 (96) stepping: 1
    microcode: 0x8600104
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
    L3: 8 MiB desc: 2x4 MiB
  Speed (MHz): avg: 1398 high: 1429 min/max: 1400/2900 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1397 2: 1397
    3: 1397 4: 1397 5: 1397 6: 1397 7: 1397 8: 1429 9: 1396 10: 1397 11: 1396
    12: 1397 13: 1397 14: 1397 15: 1397 16: 1397 bogomips: 92624
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
    IBRS_FW, STIBP: conditional, RSB filling
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: NVIDIA TU106M [GeForce RTX 2060 Mobile] vendor: Lenovo
    driver: nvidia v: 495.46 alternate: nouveau,nvidia_drm bus-ID: 01:00.0
    chip-ID: 10de:1f15 class-ID: 0300
  Device-2: IMC Networks Integrated Camera type: USB driver: uvcvideo
    bus-ID: 3-3:2 chip-ID: 13d3:56ff class-ID: 0e02
  Display: x11 server: X.Org 1.21.1.3 compositor: gnome-shell driver:
    loaded: nvidia unloaded: modesetting alternate: fbdev,nouveau,nv,vesa
    display-ID: :1 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x286mm (20.0x11.3")
    s-diag: 583mm (23")
  Monitor-1: DP-2 res: 1920x1080 hz: 144 dpi: 142
    size: 344x193mm (13.5x7.6") diag: 394mm (15.5")
  Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
  Device-1: NVIDIA TU106 High Definition Audio driver: snd_hda_intel
    v: kernel bus-ID: 01:00.1 chip-ID: 10de:10f9 class-ID: 0403
  Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
    vendor: Lenovo driver: N/A
    alternate: snd_pci_acp3x, snd_rn_pci_acp3x, snd_pci_acp5x, snd_pci_acp6x
    bus-ID: 05:00.5 chip-ID: 1022:15e2 class-ID: 0480
  Device-3: AMD Family 17h HD Audio vendor: Lenovo driver: snd_hda_intel
    v: kernel bus-ID: 05:00.6 chip-ID: 1022:15e3 class-ID: 0403
  Sound Server-1: ALSA v: k5.16.0-zen1-1-zen running: yes
  Sound Server-2: JACK v: 1.9.19 running: no
  Sound Server-3: PulseAudio v: 15.0 running: no
  Sound Server-4: PipeWire v: 0.3.43 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Lenovo driver: r8169 v: kernel port: 1000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel bus-ID: 04:00.0
    chip-ID: 8086:2723 class-ID: 0280
  IF: wlp4s0 state: down mac: <filter>
  IF-ID-1: ipv6leakintrf0 state: unknown speed: N/A duplex: N/A
    mac: <filter>
  IF-ID-2: proton0 state: unknown speed: 10 Mbps duplex: full mac: N/A
  IF-ID-3: pvpnksintrf0 state: unknown speed: N/A duplex: N/A mac: <filter>
Bluetooth:
  Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8
    bus-ID: 5-3:3 chip-ID: 8087:0029 class-ID: e001
  Report: bt-adapter ID: hci0 rfk-id: 2 state: up address: <filter>
Drives:
  Local Storage: total: 476.94 GiB used: 19.12 GiB (4.0%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix
    model: HFS512GD9TNI-L2A0B size: 476.94 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
    rev: 11010C10 temp: 28.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
    used: 19.12 GiB (4.0%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-c50056da-5063-4c3a-b0b9-717c9e6d570b
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 720 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
    used: 19.12 GiB (4.0%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-c50056da-5063-4c3a-b0b9-717c9e6d570b
  ID-4: /var/log raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
    used: 19.12 GiB (4.0%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-c50056da-5063-4c3a-b0b9-717c9e6d570b
  ID-5: /var/tmp raw-size: 476.64 GiB size: 476.64 GiB (100.00%)
    used: 19.12 GiB (4.0%) fs: btrfs dev: /dev/dm-0 maj-min: 254:0
    mapped: luks-c50056da-5063-4c3a-b0b9-717c9e6d570b
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 15.56 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: nvidia temp: 38 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 380 Uptime: 38m wakeups: 1 Memory: 15.56 GiB
  used: 3.31 GiB (21.3%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.1.0 Packages: pacman: 1269 lib: 344 Shell: fish v: 3.3.1
  default: Bash v: 5.1.16 running-in: gnome-terminal inxi: 3.3.11

Hi there, libinput-gesture is used to configure gestures by default. To configure it, see

4 Likes

Thank you very much! I was able to use the command libinput-gestures -l to find the configuration file I was needing :smiley:

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.