System:
Kernel: 6.15.7-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=bf114e63-83a4-4215-8619-51661317ce9a rw rootflags=subvol=@
quiet resume=UUID=538c48e7-abd7-4073-a642-0823b3a4eea1 loglevel=3 ibt=off
Desktop: Sway v: 0.5.3 with: waybar tools: swayidle avail: gtklock vt: 1
lm: greetd Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: HP product: HP EliteBook 840 G7 Notebook PC v: SBKPF
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 8723 v: KBC Version 06.4C.00 serial: <superuser required>
part-nu: 1D0F2UT#ABA uuid: <superuser required> UEFI: HP
v: S70 Ver. 01.18.01 date: 08/26/2024
Battery:
ID-1: BAT0 charge: 23.9 Wh (60.7%) condition: 39.4/53.2 Wh (74.0%)
volts: 11.3 min: 11.6 model: Hewlett-Packard Primary type: Li-ion
serial: <filter> status: discharging cycles: 343
CPU:
Info: model: Intel Core i7-10810U bits: 64 type: MT MCP arch: Comet Lake
gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
model-id: 0xA6 (166) stepping: 0 microcode: 0x102
Topology: cpus: 1x dies: 1 clusters: 6 cores: 6 threads: 12 tpc: 2
smt: enabled cache: L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 1.5 MiB
desc: 6x256 KiB L3: 12 MiB desc: 1x12 MiB
Speed (MHz): avg: 900 min/max: 400/4900 scaling: driver: intel_pstate
governor: powersave cores: 1: 900 2: 900 3: 900 4: 900 5: 900 6: 900 7: 900
8: 900 9: 900 10: 900 11: 900 12: 900 bogomips: 38399
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Comet Lake UHD Graphics vendor: Hewlett-Packard driver: i915
v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20 ports:
active: eDP-1 empty: DP-1, DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 00:02.0
chip-ID: 8086:9bca class-ID: 0300
Device-2: Luxvisions Innotech HP HD Camera driver: uvcvideo type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-2:3 chip-ID: 30c9:000f
class-ID: 0e02 serial: <filter>
Display: wayland server: Xwayland v: 24.1.8 compositor: Sway v: 0.5.3
driver: gpu: i915 display-ID: 1
Monitor-1: eDP-1 model: AU Optronics 0x068b built: 2019 res:
mode: 1920x1080 hz: 60 scale: 100% (1) dpi: 158 gamma: 1.2
size: 309x174mm (12.17x6.85") diag: 355mm (14") ratio: 16:9
modes: 1920x1080
API: Vulkan v: 1.4.321 layers: 6 device: 0 type: integrated-gpu name: Intel
UHD Graphics (CML GT2) driver: mesa intel v: 25.1.6-arch1.1
device-ID: 8086:9bca surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 20.1.8 256 bits) driver: mesa llvmpipe v: 25.1.6-arch1.1 (LLVM
20.1.8) device-ID: 10005:0000 surfaces: N/A
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Info: Tools: api: vulkaninfo wl: kanshi, swaymsg, wdisplays x11: xprop
Audio:
Device-1: Intel Comet Lake PCH-LP cAVS vendor: Hewlett-Packard
driver: sof-audio-pci-intel-cnl alternate: snd_hda_intel, snd_soc_avs,
snd_sof_pci_intel_cnl bus-ID: 00:1f.3 chip-ID: 8086:02c8 class-ID: 0401
API: ALSA v: k6.15.7-zen1-1-zen status: kernel-api
tools: alsactl,alsamixer,amixer
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.4.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Comet Lake PCH-LP CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:02f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
IF-ID-1: docker0 state: down mac: <filter>
Info: services: NetworkManager, sshd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel AX201 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-10:9 chip-ID: 8087:0026
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 9 state: up address: N/A
Drives:
Local Storage: total: 476.94 GiB used: 139.64 GiB (29.3%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: MZVLB512HBJQ-000H1 size: 476.94 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: HPS0NEXF temp: 33.9 C scheme: GPT
Partition:
ID-1: / raw-size: 460.32 GiB size: 460.32 GiB (100.00%)
used: 139.64 GiB (30.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 616 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 460.32 GiB size: 460.32 GiB (100.00%)
used: 139.64 GiB (30.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 460.32 GiB size: 460.32 GiB (100.00%)
used: 139.64 GiB (30.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 460.32 GiB size: 460.32 GiB (100.00%)
used: 139.64 GiB (30.3%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 14.84 GiB used: 3.82 GiB (25.8%)
priority: 100 comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842
dev: /dev/zram0
ID-2: swap-2 type: partition size: 16.32 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p3 maj-min: 259:3
Sensors:
System Temperatures: cpu: 57.0 C pch: 55.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 14.84 GiB used: 5.06 GiB (34.1%)
Processes: 473 Power: uptime: 3d 21h 57m states: freeze,mem,disk
suspend: s2idle avail: deep wakeups: 34 hibernate: platform avail: shutdown,
reboot, suspend, test_resume image: 5.91 GiB services: upowerd
Init: systemd v: 257 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1418 libs: 377 tools: pacseek,paru Compilers:
clang: 20.1.8 gcc: 15.1.1 Shell: garuda-inxi default: fish v: 4.0.2
running-in: zellij inxi: 3.3.38
Garuda (2.7.3-2):
System install date: 2025-04-28
Last full system update: 2025-07-30 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: No/Undetected
Failed units: archlinux-keyring-wkd-sync.service
I wanted to ask if garuda-update handles devel packages update because I still have to run paru to update them.
