Garuda-update-4.4.1-1 failed

Issues & Assistance
1

Servus,

I have a problem with updating the Garuda KDE Dr460nised system. Namely, I am trying to update the system via the Garuda wizard, but I encountered such a problem:
</Pakete (1) garuda-update-4.4.1-1

Gesamtgröße der installierten Pakete: 0,02 MiB
Größendifferenz der Aktualisierung: 0,00 MiB

:: Installation fortsetzen? [J/n]
:: Pakete werden empfangen …
(1/1) Schlüssel im Schlüsselbund werden geprüft [------------------------------------] 100%
(1/1) Paket-Integrität wird überprüft [------------------------------------] 100%
Fehler: Der Vorgang konnte nicht durchgeführt werden (Falsches oder NULL-Argument übergeben)
Fehler sind aufgetreten, keine Pakete wurden aktualisiert.>

I tried to refresh the mirror list, but it didn’t work.
Here is the inxi output from the terminal:

Kernel: 6.7.0-zen3-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=346b5367-21f8-493e-a691-112f26b337e0 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.12 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: Acer product: Nitro AN515-54 v: V1.33
serial: <superuser required>
Mobo: CFL model: Octavia_CFS v: V1.33 serial: <superuser required>
UEFI: Insyde v: 1.33 date: 11/17/2020
Battery:
ID-1: BAT1 charge: 42.2 Wh (100.0%) condition: 42.2/58.8 Wh (71.9%)
volts: 16.3 min: 15.4 model: SMP AP18E7M type: Li-ion serial: <filter>
status: full
CPU:
Info: model: Intel Core i5-9300H bits: 64 type: MT MCP arch: Coffee Lake
gen: core 9 level: v3 note: check built: 2018 process: Intel 14nm family: 6
model-id: 0x9E (158) stepping: 0xA (10) microcode: 0xF4
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 4036 high: 4100 min/max: 800/4100 scaling:
driver: intel_pstate governor: powersave cores: 1: 4001 2: 4100 3: 4001
4: 4098 5: 4001 6: 3998 7: 3998 8: 4096 bogomips: 38400
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel CoffeeLake-H GT2 [UHD Graphics 630]
vendor: Acer Incorporated ALI driver: i915 v: kernel arch: Gen-9.5
process: Intel 14nm built: 2016-20 ports: active: eDP-1 empty: none
bus-ID: 00:02.0 chip-ID: 8086:3e9b class-ID: 0300
Device-2: NVIDIA TU117M [GeForce GTX 1650 Mobile / Max-Q]
vendor: Acer Incorporated ALI driver: nvidia v: 545.29.06
alternate: nouveau,nvidia_drm non-free: 545.xx+ status: current (as of
2023-10; EOL~2026-12-xx) arch: Turing code: TUxxx process: TSMC 12nm FF
built: 2018-2022 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3
speed: 8 GT/s ports: active: none off: HDMI-A-1 empty: none
bus-ID: 01:00.0 chip-ID: 10de:1f91 class-ID: 0300
Device-3: Quanta HD Webcam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-5:3 chip-ID: 0408:a060
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.4
compositor: kwin_x11 driver: X: loaded: modesetting,nvidia unloaded: nouveau
alternate: fbdev,intel,nv,vesa dri: iris gpu: i915,nvidia,nvidia-nvswitch
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1013x285mm (39.88x11.22")
s-diag: 1052mm (41.43")
Monitor-1: HDMI-A-1 mapped: HDMI-1-0 note: disabled pos: primary,left
model: BenQ RL2755 serial: <filter> built: 2016 res: 1920x1080 hz: 60
dpi: 82 gamma: 1.2 size: 598x336mm (23.54x13.23") diag: 686mm (27")
ratio: 16:9 modes: max: 1920x1080 min: 640x480
Monitor-2: eDP-1 pos: right model: LG Display 0x0563 built: 2018
res: 1920x1080 hz: 60 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia platforms: device: 0
drv: nvidia device: 2 drv: iris device: 3 drv: swrast gbm: drv: nvidia
surfaceless: drv: nvidia x11: drv: iris inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: intel mesa v: 23.3.3-arch1.1
glx-v: 1.4 direct-render: yes renderer: Mesa Intel UHD Graphics 630 (CFL
GT2) device-ID: 8086:3e9b memory: 15.09 GiB unified: yes
API: Vulkan v: 1.3.274 layers: 4 device: 0 type: integrated-gpu name: Intel
UHD Graphics 630 (CFL GT2) driver: mesa intel v: 23.3.3-arch1.1
device-ID: 8086:3e9b surfaces: xcb,xlib device: 1 type: discrete-gpu
name: NVIDIA GeForce GTX 1650 driver: nvidia v: 545.29.06
device-ID: 10de:1f91 surfaces: xcb,xlib device: 2 type: cpu name: llvmpipe
(LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.3.3-arch1.1 (LLVM
16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: Intel Cannon Lake PCH cAVS vendor: Acer Incorporated ALI
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 00:1f.3 chip-ID: 8086:a348 class-ID: 0403
Device-2: NVIDIA vendor: Acer Incorporated ALI driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:10fa class-ID: 0403
API: ALSA v: k6.7.0-zen3-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.0.1 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Cannon Lake PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 00:14.3 chip-ID: 8086:a370 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Acer Incorporated ALI driver: r8169 v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 port: 3000 bus-ID: 08:00.0 chip-ID: 10ec:8168
class-ID: 0200
IF: enp8s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Intel Bluetooth 9460/9560 Jefferson Peak (JfP) driver: btusb
v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-14:5
chip-ID: 8087:0aaa class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 2 state: up address: <filter> bt-v: 5.1
lmp-v: 10 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
Local Storage: total: 1.84 TiB used: 92.28 GiB (4.9%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Western Digital model: PC SN520
SDAPNUW-512G-1014 size: 476.94 GiB block-size: physical: 512 B
logical: 512 B speed: 15.8 Gb/s lanes: 2 tech: SSD serial: <filter>
fw-rev: 20110000 temp: 28.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:3 vendor: Transcend model: TS512GMTE110S
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: R1001A3 temp: 36.9 C
scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital model: WD10SPZX-24Z10
size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 5400 serial: <filter> fw-rev: 1A04 scheme: GPT
Partition:
ID-1: / raw-size: 459.63 GiB size: 459.63 GiB (100.00%)
used: 92.25 GiB (20.1%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:5
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 26 MiB (8.7%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:4
ID-3: /home raw-size: 459.63 GiB size: 459.63 GiB (100.00%)
used: 92.25 GiB (20.1%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:5
ID-4: /var/log raw-size: 459.63 GiB size: 459.63 GiB (100.00%)
used: 92.25 GiB (20.1%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:5
ID-5: /var/tmp raw-size: 459.63 GiB size: 459.63 GiB (100.00%)
used: 92.25 GiB (20.1%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:5
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.46 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8 dev: /dev/zram0
ID-2: swap-2 type: partition size: 17.01 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme1n1p3 maj-min: 259:6
Sensors:
System Temperatures: cpu: 54.0 C pch: 57.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Processes: 288 Uptime: 1m wakeups: 0 Memory: total: 16 GiB
available: 15.46 GiB used: 3.49 GiB (22.6%) Init: systemd v: 255
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: pm: pacman pkgs: 1649 libs: 440 tools: octopi,paru,yay Shell: fish
v: 3.7.0 default: Bash v: 5.2.21 running-in: konsole inxi: 3.3.31
Garuda (2.6.22-1):
System install date:     2023-07-31
Last full system update: 2024-01-17
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       Probably (Run as root to verify)
Failed units:>~~~
2

Use

reflector --country Germany --latest 5 --age 2 --fastest 5 --protocol https --sort rate --save /etc/pacman.d/mirrorlist

Works fine here.

################################################################################
################# Arch Linux mirrorlist generated by Reflector #################
################################################################################

# With:       reflector --country Germany --latest 5 --age 2 --fastest 5 --protocol https --sort rate --save /etc/pacman.d/mirrorlist
# When:       2024-01-29 00:00:06 UTC
# From:       https://archlinux.org/mirrors/status/json/
# Retrieved:  2024-01-28 23:59:58 UTC
# Last Check: 2024-01-28 23:53:00 UTC

Server = https://archlinux.thaller.ws/$repo/os/$arch
Server = https://mirror.sunred.org/archlinux/$repo/os/$arch
Server = https://ftp.halifax.rwth-aachen.de/archlinux/$repo/os/$arch
Server = https://mirror.f4st.host/archlinux/$repo/os/$arch
Server = https://mirror.moson.org/arch/$repo/os/$arch
:: Synchronizing package databases...
 garuda is up to date
 core is up to date
 extra is up to date
 multilib is up to date
 chaotic-aur is up to date
:: Starting full system upgrade...
 there is nothing to do
3

Unfortunately, it didn’t work. Maybe there is a conflict with other packages? But I don’t know how I could check this, I’m relatively new here.

Would it help if I reinstalled all packages?

4

What did you try exactly?

No, maybe it needs a longer answer

Or

sudo pacman -S garuda-update

Or first uninstall (-R) garuda-update then update with

sudo pacman -Syu
1 Like
5

Vielen Dank dir! I just tried to update via Garuda Assistant. And I got this loop with this error. Now I see the package conflicts, but they are different from the ones with Garuda Assistant update.

I think I’ll manage the rest now, if anything I’ll write, but thanks again!

1 Like
6

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.