Garuda Settings Manager Kernel App is working?

Hello Garuda users.
I'm using generic linux kernel (because with zen I have some freez) and knowing that there is new 6.2 kernel available or aproaching to be I was runnig the Kernal app in the Garuda Setting Manager but it does show me only my using kernel even after refreshing it (and after some restart too) and there is not a list of available kernels anymore.
If I search via pacseek I can see differents kernel are availables.
pacman -fy command is ok but no way to have the list on the Kernel app
2 or 3 week ago it was ok I was able to install generic kernel via the app but now is not.
Is my fault or is a generic issue and it doesn't work for you too?
Thanks

[[email protected] ~]$ garuda-inxi
System:
  Kernel: 6.1.12-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux
    root=UUID=5acefd49-dd62-4bbe-9848-d93639d1f154 rw [email protected]
    quiet loglevel=3 ibt=off
  Desktop: KDE Plasma v: 5.27.1 tk: Qt v: 5.15.8 wm: kwin_x11 vt: 1 dm: SDDM
    Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: HUAWEI product: KPL-W0X v: M1D
    serial: <superuser required>
  Mobo: HUAWEI model: KPL-W0X-PCB v: M1D serial: <superuser required>
    UEFI: HUAWEI v: 1.24 date: 04/11/2022
Battery:
  ID-1: BAT1 charge: 53.7 Wh (100.0%) condition: 53.7/56.3 Wh (95.3%)
    volts: 7.8 min: 7.6 model: DYNAPACK HB4593R1ECW type: Li-ion
    serial: <filter> status: full cycles: 113
CPU:
  Info: model: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx bits: 64
    type: MT MCP arch: Zen level: v3 note: check built: 2017-19 process: GF 14nm
    family: 0x17 (23) model-id: 0x11 (17) stepping: 0 microcode: 0x8101007
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
    desc: 1x4 MiB
  Speed (MHz): avg: 1578 high: 1600 min/max: 1600/2000 boost: enabled
    scaling: driver: acpi-cpufreq governor: powersave cores: 1: 1600 2: 1600
    3: 1600 4: 1428 5: 1600 6: 1600 7: 1600 8: 1600 bogomips: 31949
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Raven Ridge [Radeon Vega Series / Radeon Mobile Series]
    vendor: Huawei driver: amdgpu v: kernel arch: GCN-5 code: Vega
    process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s lanes: 16
    ports: active: eDP-1 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 02:00.0
    chip-ID: 1002:15dd class-ID: 0300 temp: 35.0 C
  Device-2: Quanta hm1091_techfront type: USB driver: uvcvideo bus-ID: 3-1:2
    chip-ID: 0408:1020 class-ID: 0e02
  Display: x11 server: X.org v: 1.21.1.7 with: Xwayland v: 22.1.8
    compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting
    alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-size: <missing: xdpyinfo>
  Monitor-1: eDP-1 mapped: eDP model: ChiMei InnoLux 0x14d4 built: 2016
    res: 1920x1080 hz: 60 dpi: 158 gamma: 1.2 size: 309x173mm (12.17x6.81")
    diag: 354mm (13.9") ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: OpenGL Message: Unable to show GL data. Required tool glxinfo
    missing.
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio vendor: Huawei
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 02:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Huawei
    driver: snd_pci_acp3x v: kernel
    alternate: snd_rn_pci_acp3x,snd_pci_acp5x,snd_pci_acp6x,snd_acp_pci,snd_rpl_pci_acp6x,snd_pci_ps,snd_sof_amd_renoir,snd_sof_amd_rembrandt
    pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 02:00.5 chip-ID: 1022:15e2
    class-ID: 0480
  Device-3: AMD Family 17h/19h HD Audio vendor: Huawei driver: snd_hda_intel
    v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 02:00.6
    chip-ID: 1022:15e3 class-ID: 0403
  Sound API: ALSA v: k6.1.12-arch1-1 running: yes
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.66 running: yes
Network:
  Device-1: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:24fd class-ID: 0280
  IF: wlp1s0 state: up mac: <filter>
Bluetooth:
  Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8
    bus-ID: 1-2:2 chip-ID: 8087:0a2b class-ID: e001
  Report: bt-adapter ID: hci0 rfk-id: 0 state: down
    bt-service: enabled,running rfk-block: hardware: no software: yes
    address: <filter>
Drives:
  Local Storage: total: 238.47 GiB used: 34.48 GiB (14.5%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: LITE-ON model: CV8-8E256
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 402 scheme: GPT
Partition:
  ID-1: / raw-size: 22.24 GiB size: 22.24 GiB (100.00%) used: 5.4 GiB (24.3%)
    fs: btrfs dev: /dev/sda6 maj-min: 8:6
  ID-2: /boot/efi raw-size: 100 MiB size: 96 MiB (96.00%)
    used: 42.5 MiB (44.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 22.24 GiB size: 22.24 GiB (100.00%)
    used: 5.4 GiB (24.3%) fs: btrfs dev: /dev/sda6 maj-min: 8:6
  ID-4: /var/log raw-size: 22.24 GiB size: 22.24 GiB (100.00%)
    used: 5.4 GiB (24.3%) fs: btrfs dev: /dev/sda6 maj-min: 8:6
  ID-5: /var/tmp raw-size: 22.24 GiB size: 22.24 GiB (100.00%)
    used: 5.4 GiB (24.3%) fs: btrfs dev: /dev/sda6 maj-min: 8:6
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 6.68 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 35.8 C mobo: N/A gpu: amdgpu temp: 35.0 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 239 Uptime: 8m wakeups: 1 Memory: 6.68 GiB used: 1.79 GiB (26.8%)
  Init: systemd v: 253 default: graphical tool: systemctl Compilers: gcc: N/A
  Packages: pm: pacman pkgs: 1016 libs: 298 tools: paru Shell: Bash v: 5.1.16
  running-in: konsole inxi: 3.3.25
Garuda (2.6.15-1):
  System install date:     2023-02-18
  Last full system update: 2023-02-25
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager mkinitcpio
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:        

IDK.
Try

sudo pacman -S linux-zen linux-zen-headers linux-amd linux-amd-headers
My kernel
mhwd-kernel -li
Currently running: 6.2.0-AMD (linux-amd)
The following kernels are installed in your system:
local/linux-amd 6.2.v.0-2
1 Like

amd kernel is not good for me (there is a error when installing it and after restart no more video output) but Kernel App is showing only my 2 installed kernel and not all availables .... seems buggy

It shows for me after clicking the REFRESH button, only after clicking it.

(sorry it's in French, I'm on my father's machine)

1 Like

Thanks for your test
I have another pc (a very old netbook) with garuda this time with XFCE and I try on this old pc too and same issue not kernel list (obviously after click on the refresh button) ... I don't know why it appens because in the past I use Kernel APP to change my kernels (the older use LTS) and now is not working anymore.
I'm thinking about a issue with mirrors something like here in Italy server can't check kernel list when you click Refresh (and system made a pacman -fy alias it is syncronizing).
Well I don't know ...