The issue
error:
error start_image(): 0x800000000001
Attempts to solve it
System information
System:
Kernel: 6.7.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=garuda root=miso:LABEL=GARUDA_HYPRLAND_SPIZAETUS quiet
systemd.show_status=1 ibt=off driver=free nouveau.modeset=1
i915.modeset=1 radeon.modeset=1
Desktop: Hyprland v: 0.36.0-44-g9d89b710 with: waybar tools:
avail: swayidle,swaylock vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: ProArt B550-CREATOR v: Rev X.0x
serial: <superuser required> part-nu: SKU uuid: <superuser required>
UEFI: American Megatrends v: 3402 date: 09/20/2023
CPU:
Info: model: AMD Ryzen 7 5800X3D bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 2 microcode: 0xA20120E
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 96 MiB desc: 1x96 MiB
Speed (MHz): avg: 2602 high: 4450 min/max: 2200/4549 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2200 2: 4450
3: 2200 4: 2200 5: 2200 6: 2200 7: 2200 8: 3551 9: 2200 10: 4443 11: 2200
12: 2800 13: 2200 14: 2200 15: 2200 16: 2200 bogomips: 108809
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA102 [GeForce RTX 3080] vendor: ZOTAC driver: nouveau
v: kernel non-free: 545.xx+ status: current (as of 2024-02; EOL~2026-12-xx)
arch: Ampere code: GAxxx process: TSMC n7 (7nm) built: 2020-2023 pcie:
gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-1,DP-3
empty: DP-2,HDMI-A-1 bus-ID: 3b:00.0 chip-ID: 10de:2206 class-ID: 0300
Device-2: Microdia ACR010 USB Webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-3.1:6
chip-ID: 0c45:6368 class-ID: 0102 serial: <filter>
Device-3: Valve 3D Camera driver: uvcvideo type: USB rev: 3.2
speed: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 bus-ID: 6-2.1:4 chip-ID: 28de:2400
class-ID: 0e02 serial: <filter>
Display: wayland server: X.org v: 1.21.1.11 with: Xwayland v: 23.2.4
compositor: Hyprland v: 0.36.0-44-g9d89b710 driver: X:
loaded: modesetting,nouveau alternate: fbdev,nv,vesa dri: nouveau
gpu: nouveau d-rect: 3840x1600 display-ID: 1
Monitor-1: DP-1 pos: primary model: Dell AW3821DW serial: <filter>
built: 2020 res: 3840x1600 hz: 60 dpi: 111 gamma: 1.2 scale: 1
size: 880x367mm (34.65x14.45") diag: 953mm (37.5") modes: max: 3840x1600
min: 640x480
Monitor-2: DP-3 pos: primary model: LG (GoldStar) ULTRAGEAR
serial: <filter> built: 2022 res: 2560x1440 hz: 165 dpi: 93 gamma: 1.2
scale: 1 size: 697x392mm (27.44x15.43") diag: 800mm (31.5") ratio: 16:9
modes: max: 2560x1440 min: 640x480
API: Vulkan v: 1.3.276 layers: 4 device: 0 type: cpu name: llvmpipe (LLVM
16.0.6 256 bits) driver: mesa llvmpipe v: 24.0.2-arch1.1 (LLVM 16.0.6)
device-ID: 10005:0000 surfaces: xcb,xlib,wayland
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
Device-1: NVIDIA GA102 High Definition Audio vendor: ZOTAC
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 3b:00.1 chip-ID: 10de:1aef class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 3d:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Valve VR Radio driver: cdc_acm,hid-generic,usbhid type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 5-2.3.2:7
chip-ID: 28de:2102 class-ID: 0a00 serial: <filter>
Device-4: Valve VR Radio & HMD Mic
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 5-2.3.3:9 chip-ID: 28de:2102 class-ID: 0102
serial: <filter>
Device-5: Microdia ACR010 USB Webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-3.1:6
chip-ID: 0c45:6368 class-ID: 0102 serial: <filter>
Device-6: RODE Microphones NT-USB driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 5-3.2:8
chip-ID: 19f7:0003 class-ID: 0300
API: ALSA v: k6.7.8-zen1-1-zen status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel pcie:
gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 39:00.0 chip-ID: 8086:15f3
class-ID: 0200
IF: enp57s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 3a:00.0
chip-ID: 8086:15f3 class-ID: 0200
IF: enp58s0 state: down mac: <filter>
Info: services: NetworkManager,systemd-timesyncd
Drives:
Local Storage: total: 11.03 TiB used: 0 KiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: MSI model: M480 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: EIFM21.2 temp: 36.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Western Digital
model: WD BLACK SN770 2TB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 731100WD temp: 34.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 QVO 8TB
size: 7.28 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Lexar model: USB Flash Drive
size: 119.31 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: SSD serial: <filter>
fw-rev: PMAP scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 42.0 C mobo: 37.0 C
Fan Speeds (rpm): cpu: 319
Info:
Memory: total: 32 GiB available: 31.25 GiB used: 2.7 GiB (8.6%)
Processes: 336 Power: uptime: 7m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.47 GiB Init: systemd v: 255
default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1259 libs: 372 tools: pacseek,paru Compilers:
gcc: 13.2.1 Shell: garuda-inxi default: fish v: 3.7.0 running-in: foot
inxi: 3.3.33
warning: database file for 'garuda' does not exist (use '-Sy' to download)
warning: database file for 'core' does not exist (use '-Sy' to download)
warning: database file for 'extra' does not exist (use '-Sy' to download)
warning: database file for 'community' does not exist (use '-Sy' to download)
warning: database file for 'multilib' does not exist (use '-Sy' to download)
warning: database file for 'chaotic-aur' does not exist (use '-Sy' to download)
Garuda (2.6.23-1):
System install date: 2024-03-08
Last full system update: 2024-03-08 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: <superuser required>
Failed units:
Did you read
https://iso.builds.garudalinux.org/iso/community/hyprland/
Use modkey + I to install Garuda Hyprland or Garuda Welcome.
First boot after installation need some seconds (black screen, mouse cursor is visible and movable), seems it need time to check and set the network settings from live ISO.
Details <a class="lightbox" href="https://forum.garudalinux.org/uploads/default/original/3X/4/9/4957f937ae8f55ecbfef1c574876df3aad2aed77.jpeg" data-do…
https://iso.builds.garudalinux.org/iso/community/hyprland/240304/
1 Like
i don’t think it’s because of the nvidia card because i have an amd system and have the same problem as described in the other thread.
it has nothing to do with the hyperland iso specifically, because as i said it is the same error with the dr460nized iso.
but i’d be happy to be taught better.
meine inxi falls sie gebraucht wird
System:
Kernel: 6.7.9-273-tkg-linux-tkg-pds-generic_v3 arch: x86_64 bits: 64
compiler: gcc v: 13.2.1 clocksource: tsc avail: hpet,acpi_pm
parameters: intel_pstate=passive kernel.split_lock_mitigate=0
BOOT_IMAGE=/vmlinuz-linux-tkg-pds-generic_v3
root=UUID=38863d0d-6216-4c22-be7a-2dfdb47739b3 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: Hyprland v: 0.36.0-31-g328ab431 with: waybar tools:
avail: swayidle,swaylock vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: Gigabyte product: X670 GAMING X AX v: -CF
serial: <superuser required>
Mobo: Gigabyte model: X670 GAMING X AX v: x.x serial: <superuser required>
uuid: <superuser required> UEFI: American Megatrends LLC. v: F2
date: 09/12/2022
CPU:
Info: model: AMD Ryzen 9 7900X bits: 64 type: MT MCP arch: Zen 4 gen: 5
level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
model-id: 0x61 (97) stepping: 2 microcode: 0xA601201
Topology: cpus: 1x cores: 12 tpc: 2 threads: 24 smt: enabled cache:
L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 12 MiB desc: 12x1024 KiB
L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 2333 high: 5689 min/max: 400/5733 scaling:
driver: amd-pstate-epp governor: performance cores: 1: 5684 2: 5688 3: 400
4: 5687 5: 5689 6: 5686 7: 400 8: 5390 9: 5390 10: 5392 11: 5388 12: 400
13: 400 14: 400 15: 400 16: 400 17: 400 18: 400 19: 400 20: 400 21: 400
22: 400 23: 400 24: 400 bogomips: 225401
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
vendor: XFX driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 03:00.0
chip-ID: 1002:73df class-ID: 0300
Display: wayland server: X.org v: 1.21.1.11 with: Xwayland v: 23.2.4
compositor: Hyprland v: 0.36.0-31-g328ab431 driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 1
Monitor-1: HDMI-A-1 model: Samsung C49J89x serial: <filter> built: 2020
res: 3840x1080 hz: 120 dpi: 82 gamma: 1.2 scale: 1
size: 1196x336mm (47.09x13.23") diag: 1242mm (48.9") modes: max: 3840x1080
min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd v: N/A glx-v: 1.4
direct-render: yes renderer: AMD Radeon RX 6750 XT (radeonsi navi22 LLVM
17.0.6 DRM 3.57 6.7.9-273-tkg-linux-tkg-pds-generic_v3)
device-ID: 1002:73df memory: 11.72 GiB unified: no
API: Vulkan v: 1.3.279 layers: 3 device: 0 type: discrete-gpu name: AMD
Radeon RX 6750 XT (RADV NAVI22) driver: mesa radv
v: 24.1.0-devel (git-6965c569cc) device-ID: 1002:73df
surfaces: xcb,xlib,wayland device: 1 type: cpu name: llvmpipe (LLVM
17.0.6 256 bits) driver: mesa llvmpipe v: 24.1.0-devel (git-6965c569cc)
(LLVM 17.0.6) device-ID: 10005:0000 surfaces: xcb,xlib,wayland
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: AMD Family 17h/19h HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 17:00.6 chip-ID: 1022:15e3 class-ID: 0403
API: ALSA v: k6.7.9-273-tkg-linux-tkg-pds-generic_v3 status: kernel-api
with: aoss type: oss-emulator tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: Gigabyte driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 10:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp16s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: MEDIATEK MT7922 802.11ax PCI Express Wireless Network Adapter
driver: mt7921e v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1
bus-ID: 11:00.0 chip-ID: 14c3:0616 class-ID: 0280
IF: wlp17s0 state: down mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-7:3 chip-ID: 0e8d:0616
class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c0104
Drives:
Local Storage: total: 2.16 TiB used: 105.15 GiB (4.7%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO 2TB
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 5B2QGXA7 temp: 36.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 860 EVO 250GB
size: 232.89 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 1B6Q scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: SanDisk model: SanDisk 3.2 Gen1
size: 120.28 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 tech: N/A serial: <filter>
fw-rev: DL17 scheme: GPT
Partition:
ID-1: / raw-size: 1.34 TiB size: 1.34 TiB (100.00%) used: 104.89 GiB (7.6%)
fs: btrfs dev: /dev/nvme0n1p7 maj-min: 259:7
ID-2: /boot raw-size: 1024 MiB size: 1022 MiB (99.80%)
used: 262.4 MiB (25.7%) fs: vfat dev: /dev/nvme0n1p6 maj-min: 259:6
ID-3: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
used: 288 KiB (0.1%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-4: /home raw-size: 1.34 TiB size: 1.34 TiB (100.00%)
used: 104.89 GiB (7.6%) fs: btrfs dev: /dev/nvme0n1p7 maj-min: 259:7
ID-5: /var/log raw-size: 1.34 TiB size: 1.34 TiB (100.00%)
used: 104.89 GiB (7.6%) fs: btrfs dev: /dev/nvme0n1p7 maj-min: 259:7
ID-6: /var/tmp raw-size: 1.34 TiB size: 1.34 TiB (100.00%)
used: 104.89 GiB (7.6%) fs: btrfs dev: /dev/nvme0n1p7 maj-min: 259:7
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 50 (default 100)
zswap: no
ID-1: swap-1 type: zram size: 31.08 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 24 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 50.4 C mobo: 34.0 C gpu: amdgpu temp: 41.0 C
mem: 38.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 0
Info:
Memory: total: 32 GiB note: est. available: 31.08 GiB used: 5.17 GiB (16.6%)
Processes: 438 Power: uptime: 2h 34m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 12.42 GiB Init: systemd v: 255
default: graphical tool: systemctl
Packages: pm: pacman pkgs: 1683 libs: 517 tools: pacseek,paru Compilers:
clang: 17.0.6 gcc: 13.2.1 Shell: garuda-inxi default: fish v: 3.7.0
running-in: foot inxi: 3.3.33
Garuda (2.6.23-1):
System install date: 2024-03-06
Last full system update: 2024-03-08
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units:
2 Likes
setting the partitions as you mentioned allowed me to boot.
And as the image shows, it happens when still booting.
you write that it works as i have described and show a picture where it does not work.
what now does it work with the boot or not?
edit:
If it doesn’t work like this, then unfortunately I can’t help you any more.
then someone who knows a lot more about it than I do will have to take a look.
It does work, I’m just illustrating what happens when you don’t manually partition
1 Like
Just saying here, I had this similar error with hyprland latest iso and sway too. I just never had the time fix it or report it so I kept on hold.
After installing and selecting in grub, it would just throw me back to grub…
system
23 March 2024 08:10
9
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
