Hallo,
ich bekommen beim Ausführen des Befehls “Verwaiste Pakete entfernen (pacman -Rns $(pacman -Qdtq)” den Fehler angezeigt: “Keine Ziel-Dateien angegeben (benutzen Sie -h für Hilfe)”
Was kann ich machen/prüfen, um das zu beheben?
System:
Kernel: 6.12.7-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=bf7aa782-f300-4045-bd27-917c9be4dec9 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: GNOME v: 47.2 tk: GTK v: 3.24.43 wm: gnome-shell
tools: gsd-screensaver-proxy dm: GDM v: 47.0 Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: FUJITSU product: ESPRIMO Q920 v: N/A
serial: <superuser required> Chassis: type: 16 v: C$Z255
serial: <superuser required>
Mobo: FUJITSU model: D3233-A1 v: S26361-D3233-A1
serial: <superuser required> part-nu: S26361-Kxxx-Vyyy
uuid: <superuser required> BIOS: FUJITSU // American Megatrends v: 4.6.5.4
R1.46.0.SR.1 for D3233-A1x date: 09/21/2018
CPU:
Info: model: Intel Core i5-4590T bits: 64 type: MCP arch: Haswell
gen: core 4 level: v3 note: check built: 2013-15 process: Intel 22nm
family: 6 model-id: 0x3C (60) stepping: 3 microcode: 0x28
Topology: cpus: 1x dies: 1 clusters: 4 cores: 4 smt: <unsupported> cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 6 MiB desc: 1x6 MiB
Speed (MHz): avg: 800 min/max: 800/3000 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 800 2: 800 3: 800 4: 800 bogomips: 15963
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
vendor: Fujitsu Solutions driver: i915 v: kernel arch: Gen-7.5
process: Intel 22nm built: 2013 ports: active: HDMI-A-1,HDMI-A-2
empty: DP-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0412 class-ID: 0300
Device-2: Dell Integrated_Webcam_5M_IR driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-10.4:8 chip-ID: 413c:c01d
class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.15 with: Xwayland v: 24.1.4
compositor: gnome-shell driver: X: loaded: modesetting
alternate: fbdev,intel,vesa dri: crocus gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 3840x1080 s-dpi: 96 s-size: 1016x285mm (40.00x11.22")
s-diag: 1055mm (41.54")
Monitor-1: HDMI-A-1 mapped: HDMI-1 pos: primary,left model: BenQ G2420HDBL
serial: <filter> built: 2010 res: 1920x1080 hz: 60 dpi: 102 gamma: 1.2
size: 477x268mm (18.78x10.55") diag: 604mm (23.8") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-2: HDMI-A-2 mapped: HDMI-2 pos: right model: Dell S2422HZ
serial: <filter> built: 2022 res: 1920x1080 hz: 60 dpi: 93 gamma: 1.2
size: 527x296mm (20.75x11.65") diag: 604mm (23.8") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
API: Vulkan v: 1.4.303 layers: 9 device: 0 type: cpu name: llvmpipe (LLVM
18.1.8 256 bits) driver: N/A device-ID: 10005:0000 surfaces: xcb,xlib
API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Audio:
Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio
vendor: Fujitsu Solutions driver: snd_hda_intel v: kernel bus-ID: 00:03.0
chip-ID: 8086:0c0c class-ID: 0403
Device-2: Intel 8 Series/C220 Series High Definition Audio
vendor: Fujitsu Solutions driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:8c20 class-ID: 0403
Device-3: Dell S2422HZ driver: hid-generic,snd-usb-audio,usbhid type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-10.3:7
chip-ID: 413c:c01b class-ID: 0300
API: ALSA v: k6.12.7-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 1.2.7 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I217-LM vendor: Fujitsu Solutions driver: e1000e
v: kernel port: f080 bus-ID: 00:19.0 chip-ID: 8086:153a class-ID: 0200
IF: enp0s25 state: down mac: <filter>
Device-2: TP-Link Archer T4U v2 [Realtek RTL8812AU] driver: rtl8812au
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-9:5
chip-ID: 2357:010d class-ID: 0000 serial: <filter>
IF: wlp0s20u9 state: up mac: <filter>
IF-ID-1: br10 state: down mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Drives:
Local Storage: total: 476.94 GiB used: 372.29 GiB (78.1%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 model: SATA SSD 512GB size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s tech: SSD
serial: <filter> fw-rev: 3A0 scheme: MBR
Partition:
ID-1: / raw-size: 476.93 GiB size: 476.93 GiB (100.00%)
used: 372.29 GiB (78.1%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 476.93 GiB size: 476.93 GiB (100.00%)
used: 372.29 GiB (78.1%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-3: /var/log raw-size: 476.93 GiB size: 476.93 GiB (100.00%)
used: 372.29 GiB (78.1%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-4: /var/tmp raw-size: 476.93 GiB size: 476.93 GiB (100.00%)
used: 372.29 GiB (78.1%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.5 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 4
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 62.0 C pch: 64.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB available: 15.5 GiB used: 2.8 GiB (18.1%)
Processes: 250 Power: uptime: 1m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.18 GiB services: gsd-power,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Packages: 1565 pm: pacman pkgs: 1548 libs: 423
tools: gnome-software,pamac,paru pm: flatpak pkgs: 17 Compilers: gcc: 14.2.1
Shell: garuda-inxi default: fish v: 3.7.1 running-in: gnome-terminal
inxi: 3.3.36
Garuda (2.6.26-1):
System install date: 2023-12-13
Last full system update: 2024-12-28
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: <superuser required>
Failed units:
