When trying to update the 2 files it fails with a "Failed to generate a gvfs-smb-git information" error displayed. Any possibility this can be corrected or is there something I'm not doing right.
Follow the forum template and post the whole error logs first.
1 Like
Ok will get that here shortly didn't think they would be needed for this but obviously i was wrong.
garuda-inxystem:
Kernel: 6.2.11-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=ce99b764-410e-4797-b014-5b3cbd43e763 rw rootflags=subvol=@
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3 ibt=off
Desktop: Cinnamon v: 5.6.8 tk: GTK v: 3.24.37 info: latte-dock vt: 1
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial:
Mobo: ASUSTeK model: ROG CROSSHAIR VIII DARK HERO v: Rev X.0x
serial: UEFI: American Megatrends v: 4402
date: 02/03/2023
CPU:
Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 2 microcode: 0xA20120A
Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB
L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 3400 min/max: 2200/5083 boost: enabled scaling:
driver: acpi-cpufreq governor: performance cores: 1: 3400 2: 3400 3: 3400
4: 3400 5: 3400 6: 3400 7: 3400 8: 3400 9: 3400 10: 3400 11: 3400 12: 3400
13: 3400 14: 3400 15: 3400 16: 3400 17: 3400 18: 3400 19: 3400 20: 3400
21: 3400 22: 3400 23: 3400 24: 3400 25: 3400 26: 3400 27: 3400 28: 3400
29: 3400 30: 3400 31: 3400 32: 3400 bogomips: 217589
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Graphics:
Device-1: AMD Navi 22 [Radeon RX 6700/6700 XT/6750 XT / 6800M/6850M XT]
vendor: Gigabyte driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: DP-2 empty: DP-1,HDMI-A-1,HDMI-A-2
bus-ID: 0d:00.0 chip-ID: 1002:73df class-ID: 0300
Device-2: Sunplus Innovation Aluratek UHD 4K Camera type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 5-2.4.1.1.1:13 chip-ID: 1bcf:0b26
class-ID: 0102 serial:
Display: x11 server: [X.Org](http://X.Org) v: 21.1.8 with: Xwayland v: 23.1.1 driver: X:
loaded: amdgpu unloaded: modesetting,radeon alternate: fbdev,vesa
dri: radeonsi gpu: amdgpu display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 96 s-size: 677x381mm (26.65x15.00")
s-diag: 777mm (30.58")
Monitor-1: DP-2 mapped: DisplayPort-1 model: Gigabyte AORUS FI32Q X
built: 2020 res: 2560x1440 hz: 240 dpi: 92 gamma: 1.2
size: 708x399mm (27.87x15.71") diag: 813mm (32") ratio: 16:9 modes:
max: 2560x1440 min: 720x400
API: OpenGL v: 4.5 Mesa 23.0.2 renderer: llvmpipe (LLVM 15.0.7 256 bits)
direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel
bus-ID: 5-2.4.1.1.1:13 pcie: chip-ID: 1bcf:0b26 gen: 4 speed: 16 GT/s
class-ID: 0102 serial: lanes: 16 bus-ID: 0d:00.1
chip-ID: 1002:ab28 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 10:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Sunplus Innovation Aluratek UHD 4K Camera type: USB
driver: snd-usb-audio,uvcvideo
Device-4: Giga-Byte ESS SABRE HiFi USB Audio Device type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 5-2.4.1.2:12
chip-ID: 0414:a00c class-ID: 0300
Device-5: Giga-Byte USB Audio type: USB driver: snd-usb-audio
bus-ID: 5-2.4.1.3:8 chip-ID: 0414:a008 class-ID: 0102 serial:
API: ALSA v: k6.2.11-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.69 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 06:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp6s0 state: down mac:
Device-2: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 07:00.0
chip-ID: 8086:1539 class-ID: 0200
IF: enp7s0 state: down mac:
Device-3: Aquantia AQC100 10G Ethernet MAC [AQtion] vendor: ASUSTeK
driver: atlantic v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 1 link-max:
lanes: 4 port: N/A bus-ID: 0e:00.0 chip-ID: 1d6a:00b1 class-ID: 0200
temp: 43.0 C
IF: enp14s0 state: up speed: 1000 Mbps duplex: full mac:
Drives:
Local Storage: total: 53.66 TiB used: 26.01 TiB (48.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial:
rev: 2B2QEXM7 temp: 27.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:1 vendor: Samsung
model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial:
rev: 2B2QEXM7 temp: 27.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD100EMAZ-00WJTA0 size: 9.1 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial:
rev: 0A83 scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 870 EVO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: rev: 2B6Q scheme: MBR
ID-5: /dev/sdc maj-min: 8:32 type: USB vendor: Western Digital
model: WD140EDGZ-11B1PA0 size: 12.73 TiB block-size: physical: 4096 B
logical: 512 B type: HDD rpm: 7200 serial: rev: 3012 scheme: GPT
ID-6: /dev/sdd maj-min: 8:48 type: USB vendor: Western Digital
model: WD180EDGZ-11B2DA0 size: 16.37 TiB block-size: physical: 4096 B
logical: 512 B type: HDD rpm: 7200 serial: rev: 3012 scheme: GPT
ID-7: /dev/sde maj-min: 8:64 type: USB vendor: Western Digital
model: WD140EDGZ-11B1PA0 size: 12.73 TiB block-size: physical: 4096 B
logical: 512 B type: HDD rpm: 7200 serial: rev: 3012 scheme: GPT
Partition:
ID-1: / raw-size: 40.03 GiB size: 40.03 GiB (100.00%)
used: 25.15 GiB (62.8%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 596 KiB (0.2%) fs: vfat dev: /dev/sdb1 maj-min: 8:17
ID-3: /home raw-size: 887.2 GiB size: 887.2 GiB (100.00%)
used: 702.77 GiB (79.2%) fs: btrfs dev: /dev/sdb4 maj-min: 8:20
ID-4: /var/log raw-size: 40.03 GiB size: 40.03 GiB (100.00%)
used: 25.15 GiB (62.8%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
ID-5: /var/tmp raw-size: 40.03 GiB size: 40.03 GiB (100.00%)
used: 25.15 GiB (62.8%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 31.25 GiB used: 256 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 38.0 C mobo: 34.0 C gpu: amdgpu temp: 58.0 C
mem: 62.0 C
Fan Speeds (RPM): cpu: 0 gpu: amdgpu fan: 0
Info:
Processes: 527 Uptime: 3h 1m wakeups: 0 Memory: 31.25 GiB
used: 5.11 GiB (16.3%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: pacman
pkgs: 1874 libs: 420 tools: octopi,pamac,paru Shell: Bash v: 5.1.16
running-in: xterm inxi: 3.3.26
Garuda (2.6.16-1):
System install date: 2023-01-21
Last full system update: 2023-04-17 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager mkinitcpio
Windows dual boot: Probably (Run as root to verify)
Failed units:
and here is the error log
Preparing...
Synchronizing package databases...
Refreshing extra.db...
Refreshing community.db...
Refreshing chaotic-aur.db...
Refreshing AUR...
Cloning gvfs-git build files...
Generating gvfs-smb-git information...
Failed to prepare transaction:
Failed to generate gvfs-smb-git information
Also sorry if seemed cross i'm at home recuperating from surgery and am a little out of sorts due to the medications so my temperment is a little short
Hi,
I edit your text, please use three ~ in first and last line, like
~~~
Terminal text
~~~
then others can easily expand or copy the text.
Terminal text
Move the mouse cursor over the icon in the upper right corner to expand or copy the text.
Please do not post here in the forum like in chat forums like Telegram.
As long as no one has responded to your post you can edit your post.
1 Like
Why are you using gvfs-git and gvfs-smb-git, there are packages in the repo for that.
pacman -Rnsdd gvfs-git gvfs-smb-git && pacman -S gvfs gvfs-smb, fixed
4 Likes
They were installed automatically in Pamac when i installed evince but thank you for the terminal commands they did the trick and fixed it. I did not intentionally install the git ones they were pulled in by something else when i installed evince but as to what did that its beyond my abilities to determine. ill mark this as solved if it will let me I'm still learning so please be patiient
This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.