Error While trying to make a bootable USB

Hello :wave: I am airy and I am having a issue while making a bootable USB using rufus
Here is the full rufus log

Rufus x86 v3.14.1788
Windows version: Windows 10 64-bit (Build 19041.746)
Syslinux versions: 4.07/2013-07-25, 6.04/pre1
Grub versions: 0.4.6a, 2.04
System locale ID: 0x0409 (en-US)
Will use default UI locale 0x0409
SetLGP: Successfully set NoDriveTypeAutorun policy to 0x0000009E
Localization set to 'en-US'
Notice: The ISO download feature has been deactivated because 'Check for updates' is disabled in your settings.
Found USB 2.0 device 'SanDisk Cruzer Blade USB Device' (0781:5567)
1 device found
Disk type: Removable, Disk size: 16 GB, Sector size: 512 bytes
Cylinders: 1869, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0xAAB49E03
Drive has a Windows 7 Master Boot Record
Partition 1:
  Type: FAT32 LBA (0x0c)
  Size: 14.3 GB (15375269888 bytes)
  Start Sector: 2048, Boot: Yes
Scanning image...
ISO analysis:
  Image is an ISO9660 image
  Detected Grub version: 2.06
Disk image analysis:
  Image has an unknown Master Boot Record
  Image is a bootable disk image
ISO label: 'GARUDA_DR460NIZED_SOARING_'
  Size: 2.3 GB (Projected)
  Uses: GRUB2
  Uses: EFI
Note: DD image mode enforced since this ISOHybrid is not ISO mode compatible.
Using image: garuda-dr460nized-linux-zen-210729.iso (2.3 GB)

Format operation started
Requesting disk access...
Will use 'E:' as volume mountpoint
Deleting partitions:
● Partition 1 (offset: 1048576, size: 14.3 GB)
Opened \\.\PhysicalDrive1 for exclusive write access
Requesting logical volume handle...
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Remounted \\?\Volume{ffb13b3c-f13e-11eb-8acc-5454e598ba10}\ as E:

Found USB 2.0 device 'SanDisk Cruzer Blade USB Device' (0781:5567)
1 device found
Disk type: Removable, Disk size: 16 GB, Sector size: 512 bytes
Cylinders: 1869, Tracks per cylinder: 255, Sectors per track: 63
Partition type: MBR, NB Partitions: 1
Disk ID: 0x00000000
Drive has an unknown Master Boot Record
Partition 2:
  Type: EFI FAT (0xef)
  Size: 4 MB (4194304 bytes)
  Start Sector: 4824948, Boot: No

Please assist me with this

I don't see any obvious errors in the log, but I am not that familiar with Rufus.

As a workaround, I would try using Etcher instead if you are on Windows.

3 Likes

Hello,
and
:slight_smile:

Give Ventoy a try, it works fine for me.

3 Likes

It would be more useful if you asked about this error at Rufus support, since they know their program.

In any case, you may try to either manually recreate the USB drive partition table (GPT), or use a different USB drive.

4 Likes

From garudalinux.org/downloads.html

Create a bootable USB using DD/Etcher

4 Likes

It has been fixed now :slight_smile: thank you all for the support

How?
Please mark the appropriate post as solution, or describe your own.
PS: Welcome!

4 Likes