"Error: unknown option: --gl" in consoles?

System:
Kernel: 6.4.11-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=001caf9f-d61b-49d5-bd03-7ee709b42de2 rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 5.27.7 tk: Qt v: 5.15.10 wm: kwin_wayland vt: 1
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASRock model: B550 Taichi serial: <superuser required>
UEFI: American Megatrends LLC. v: L2.71 date: 04/14/2023
CPU:
Info: model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3+ gen: 4
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 0 microcode: 0xA201025
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 3800 min/max: 2200/5084 boost: enabled scaling:
driver: acpi-cpufreq governor: performance cores: 1: 3800 2: 3800 3: 3800
4: 3800 5: 3800 6: 3800 7: 3800 8: 3800 9: 3800 10: 3800 11: 3800 12: 3800
13: 3800 14: 3800 15: 3800 16: 3800 bogomips: 121598
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 21 [Radeon RX 6900 XT] vendor: Gigabyte driver: amdgpu
v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm) built: 2020-22
pcie: gen: 4 speed: 16 GT/s lanes: 16 ports: active: DP-2,HDMI-A-1
off: HDMI-A-2 empty: DP-1 bus-ID: 10:00.0 chip-ID: 1002:73af
class-ID: 0300
Device-2: Logitech C922 Pro Stream Webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3.4.4:5
chip-ID: 046d:085c class-ID: 0102 serial: <filter>
Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.2.0
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu d-rect: 6400x2520 display-ID: 0
Monitor-1: DP-2 pos: bottom-l res: 3840x1080 size: N/A modes: N/A
Monitor-2: HDMI-A-1 pos: top-right res: 2560x1440 size: N/A modes: N/A
API: OpenGL v: 4.6 Mesa 23.1.6 renderer: AMD Radeon RX 6900 XT (navi21
LLVM 15.0.7 DRM 3.52 6.4.11-zen2-1-zen) direct-render: Yes
Audio:
Device-1: Creative Labs driver: snd_hda_intel v: kernel bus-ID: 05:00.0
chip-ID: 1102:0010 class-ID: 0403
Device-2: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel
pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 10:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-3: Logitech PRO X Wireless Gaming Headset
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 1.1 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-6:4 chip-ID: 046d:0aba class-ID: 0300
Device-4: Logitech Blue Microphones
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 480 Mb/s
lanes: 1 mode: 2.0 bus-ID: 3-3.3:3 chip-ID: 046d:0ab7 class-ID: 0300
serial: <filter>
Device-5: Logitech C922 Pro Stream Webcam driver: snd-usb-audio,uvcvideo
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3.4.4:5
chip-ID: 046d:085c class-ID: 0102 serial: <filter>
API: ALSA v: k6.4.11-zen2-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 0.3.77 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I225-V driver: igc v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 port: N/A bus-ID: 07:00.0 chip-ID: 8086:15f3
class-ID: 0200
IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 0a:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp10s0 state: down mac: <filter>
Device-3: Microsoft Xbox Wireless Adapter for Windows driver: N/A
type: USB rev: 2.1 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4.3:5
chip-ID: 045e:02e6 class-ID: 0000 serial: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-9:13 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 2 state: down bt-service: enabled,running
rfk-block: hardware: no software: no address: <filter> bt-v: 5.2 lmp-v: 11
status: discoverable: no pairing: no
Drives:
Local Storage: total: 17.28 TiB used: 175.46 GiB (1.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SFYRD2000G
size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: EIFK31.6 temp: 31.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Western Digital
model: WDS100T3X0C-00SJG0 size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 111130WD temp: 41.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: SSD PLUS 1000GB
size: 931.52 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: <filter> fw-rev: 00RL scheme: GPT
ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD80EDAZ-11TA3A0 size: 7.28 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 0A81 scheme: GPT
ID-5: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST3000DM001-1CH166
size: 2.73 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: CC29 scheme: GPT
ID-6: /dev/sdd maj-min: 8:48 vendor: Toshiba model: MD04ACA400
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
tech: HDD rpm: 7200 serial: <filter> fw-rev: FP2A scheme: GPT
Partition:
ID-1: / raw-size: 914.5 GiB size: 914.5 GiB (100.00%)
used: 175.45 GiB (19.2%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
ID-2: /boot/efi raw-size: 256 MiB size: 252 MiB (98.46%)
used: 15.9 MiB (6.3%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:5
ID-3: /home raw-size: 914.5 GiB size: 914.5 GiB (100.00%)
used: 175.45 GiB (19.2%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
ID-4: /var/log raw-size: 914.5 GiB size: 914.5 GiB (100.00%)
used: 175.45 GiB (19.2%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
ID-5: /var/tmp raw-size: 914.5 GiB size: 914.5 GiB (100.00%)
used: 175.45 GiB (19.2%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:6
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 31.27 GiB used: 1.2 MiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16 dev: /dev/zram0
ID-2: swap-2 type: partition size: 16.76 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme1n1p3 maj-min: 259:7
Sensors:
System Temperatures: cpu: 42.0 C mobo: N/A gpu: amdgpu temp: 34.0 C
mem: 32.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 0
Info:
Processes: 367 Uptime: 47m wakeups: 0 Memory: total: 32 GiB
available: 31.27 GiB used: 4.64 GiB (14.8%) Init: systemd v: 254
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 15.0.7
Packages: pm: pacman pkgs: 2165 libs: 530 tools: pamac,paru Shell: fish
v: 3.6.1 running-in: konsole inxi: 3.3.29
Garuda (2.6.16-1):
System install date:     2022-04-04
Last full system update: 2023-08-22
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       Probably (Run as root to verify)
Failed units:

Hi, suddenly I get the error on the topic, on opening Konsole or Alacritty.
Checked fish.config, but there isn't --gl anywhere... Don't know where else to look?
I have almost exactly same hardware on another machine with Garuda, it doesn't have the same problem...

I haven't really changed anything...

Try

grep -rnw '.config/fish/config.fish' -e '--gl'

or only .config
Maybe you typed accidental in this file?

I haven't touched them for a long while...
There's this in fastfetch, but I haven't touched this either.... And syntax seems right...

# GL option
# Sets with opengl context creation library to use
# Must be either auto, egl, glx or osmesa
# Default is auto.
--gl auto

Remove --gl, save file

Hmmm, no. Now it gives "unknown option: auto" :smiley:
But we are on right tracks :slight_smile:

did you delete the space in front too?

I did.

In which file it is?

It was in .config/fastfetch/.config
Or something like that :wink:

I removed Fastfetch, deleted the .config-file in the folder I said above.
And reinstalled Fastfetch.
Now it's back to default, but the "finer" logo in Konsole is gone...
Well, I'll check the other things, when I have time :slight_smile:

Thanks for lending a helping hand!

P.S. Nope, the logo is ok in the konsole also! So all is fixed! :smiley:

2 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.