Error: failed retrieving file 'custom.db'

Ich kann kein Update mehr ausführen

╰─λ sudo garuda-update
[sudo] Passwort für peter:     
:: Paketdatenbanken werden synchronisiert …
core ist aktuell
extra                                1724,2 KiB   872 KiB/s 00:02 [------------------------------------] 100%
community                               6,6 MiB  1790 KiB/s 00:04 [------------------------------------] 100%
multilib ist aktuell
chaotic-aur                          1709,3 KiB   795 KiB/s 00:02 [------------------------------------] 100%
custom.db konnte nicht heruntergeladen werden
Fehler: Konnte Datei 'custom.db' nicht von Platte übertragen : Couldn't open file /home/custompkgs/custom.db
Fehler: Keine Datenbank konnte synchronisiert werden (Unerwarteter Fehler)

--> Refreshing mirrorlists using rate-mirrors, please be patient..
thread 'tokio-runtime-worker' panicked at 'called `Result::unwrap()` on an `Err` value: SystemTimeError(975.970052ms)', src/
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
thread 'tokio-runtime-worker' panicked at 'called `Result::unwrap()` on an `Err` value: SystemTimeError(979.04291ms)', src/
thread 'tokio-runtime-worker' panicked at 'called `Result::unwrap()` on an `Err` value: SystemTimeError(971.020278ms)', src/
thread 'thread 'tokio-runtime-workertokio-runtime-worker' panicked at '' panicked at 'called `Result::unwrap()` on an `Err` value: SystemTimeError(470.168988ms)called `Result::unwrap()` on an `Err` value: SystemTimeError(470.141537ms)', ', src/speed_test.rssrc/

thread 'tokio-runtime-worker' panicked at 'called `Result::unwrap()` on an `Err` value: SystemTimeError(216.303527ms)', src/
:: Paketdatenbanken werden synchronisiert …
core                                  157,3 KiB   672 KiB/s 00:00 [------------------------------------] 100%
extra                                1724,2 KiB  2,03 MiB/s 00:01 [------------------------------------] 100%
community                               6,6 MiB  4,65 MiB/s 00:01 [------------------------------------] 100%
multilib                              175,4 KiB   816 KiB/s 00:00 [------------------------------------] 100%
chaotic-aur                          1709,3 KiB   597 KiB/s 00:03 [------------------------------------] 100%
custom.db konnte nicht heruntergeladen werden
Fehler: Konnte Datei 'custom.db' nicht von Platte übertragen : Couldn't open file /home/custompkgs/custom.db
Fehler: Keine Datenbank konnte synchronisiert werden (Unerwarteter Fehler)

Failed to update mirrorlist
:: Paketdatenbanken werden synchronisiert …
core ist aktuell
extra ist aktuell
community ist aktuell
multilib ist aktuell
chaotic-aur ist aktuell
custom.db konnte nicht heruntergeladen werden
Fehler: Konnte Datei 'custom.db' nicht von Platte übertragen : Couldn't open file /home/custompkgs/custom.db
Fehler: Keine Datenbank konnte synchronisiert werden (Unerwarteter Fehler)

--> Applying keyring updates before starting full system update..
Warnung: database file for 'custom' does not exist (use '-Sy' to download)
Warnung: archlinux-keyring-20220224-1 ist aktuell -- Überspringe
Warnung: chaotic-keyring-20220220-1 ist aktuell -- Überspringe
Warnung: garuda-hotfixes-1.1.1-1 ist aktuell -- Überspringe
Es gibt nichts zu tun
spawn pacman -Su -y
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
multilib is up to date
chaotic-aur is up to date
custom.db failed to download
error: failed retrieving file 'custom.db' from disk : Couldn't open file /home/custompkgs/custom.db
error: failed to synchronize all databases (unexpected error)
expect: spawn id exp4 not open
while executing
"expect {
-re {Replace \S+ with \S+ \[Y\/n\]} { send "y\r"; exp_continue }
"resolving dependencies..." { }
timeout { }
eof doExit
(file "/usr/lib/garuda/garuda-update/auto-pacman" line 33)
  Kernel: 5.17.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=fb2d09bf-e679-4fbb-9cfe-6bcdcf1ebc16 rw root[email protected]
    quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    resume=UUID=c6fda769-cf95-409c-b9b3-f3531b23f1eb loglevel=3
  Desktop: KDE Plasma v: 5.24.4 tk: Qt v: 5.15.3 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
  Type: Laptop System: Micro-Star product: GE73VR 7RF v: REV:1.0
    serial: <superuser required> Chassis: type: 10 serial: <superuser required>
  Mobo: Micro-Star model: MS-17C1 v: REV:1.0 serial: <superuser required>
    UEFI: American Megatrends v: E17C1IMS.10A date: 03/13/2018
  ID-1: BAT1 charge: 28.5 Wh (70.9%) condition: 40.2/53.4 Wh (75.3%)
    volts: 11.1 min: 10.9 model: MSI BIF0_9 type: Li-ion serial: N/A
    status: discharging
  Info: model: Intel Core i7-7700HQ bits: 64 type: MT MCP arch: Kaby Lake
    family: 6 model-id: 0x9E (158) stepping: 9 microcode: 0xEC
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
    L3: 6 MiB desc: 1x6 MiB
  Speed (MHz): avg: 800 min/max: 800/3800 scaling: driver: intel_pstate
    governor: powersave cores: 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800
    8: 800 bogomips: 44798
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
  Type: itlb_multihit status: KVM: VMX disabled
  Type: l1tf
    mitigation: PTE Inversion; VMX: conditional cache flushes, SMT vulnerable
  Type: mds mitigation: Clear CPU buffers; SMT vulnerable
  Type: meltdown mitigation: PTI
  Type: spec_store_bypass
    mitigation: Speculative Store Bypass disabled via prctl
  Type: spectre_v1
    mitigation: usercopy/swapgs barriers and __user pointer sanitization
  Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
    STIBP: conditional, RSB filling
  Type: srbds mitigation: Microcode
  Type: tsx_async_abort status: Not affected
  Device-1: Intel HD Graphics 630 vendor: Micro-Star MSI driver: i915
    v: kernel ports: active: eDP-1 empty: none bus-ID: 00:02.0
    chip-ID: 8086:591b class-ID: 0300
  Device-2: NVIDIA GP104M [GeForce GTX 1070 Mobile] vendor: Micro-Star MSI
    driver: nvidia v: 510.60.02 alternate: nouveau,nvidia_drm pcie: gen: 1
    speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports:
    active: none empty: DP-1,HDMI-A-1 bus-ID: 01:00.0 chip-ID: 10de:1ba1
    class-ID: 0300
  Device-3: Acer HD Webcam type: USB driver: uvcvideo bus-ID: 1-11:4
    chip-ID: 5986:1140 class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.3 with: Xwayland v: 22.1.1
    compositor: kwin_x11 driver: X: loaded: modesetting,nvidia gpu: i915
    display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: eDP-1 model: ChiMei InnoLux 0x1747 built: 2016 res: 1920x1080
    hz: 120 dpi: 128 gamma: 1.2 size: 381x214mm (15x8.43") diag: 437mm (17.2")
    ratio: 16:9 modes: 1920x1080
  OpenGL: renderer: Mesa Intel HD Graphics 630 (KBL GT2) v: 4.6 Mesa 22.0.1
    direct render: Yes
  Device-1: Intel CM238 HD Audio vendor: Micro-Star MSI driver: snd_hda_intel
    v: kernel bus-ID: 00:1f.3 chip-ID: 8086:a171 class-ID: 0403
  Device-2: NVIDIA GP104 High Definition Audio driver: snd_hda_intel
    v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3
    speed: 8 GT/s bus-ID: 01:00.1 chip-ID: 10de:10f0 class-ID: 0403
  Sound Server-1: ALSA v: k5.17.3-zen1-1-zen running: yes
  Sound Server-2: PulseAudio v: 15.0 running: no
  Sound Server-3: PipeWire v: 0.3.50 running: yes
  Device-1: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter
    vendor: Rivet Networks driver: ath10k_pci v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 168c:003e
    class-ID: 0280
  IF: wlp2s0 state: up mac: <filter>
  Device-2: Qualcomm Atheros Killer E2500 Gigabit Ethernet
    vendor: Micro-Star MSI driver: alx v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 port: d000 bus-ID: 05:00.0 chip-ID: 1969:e0b1 class-ID: 0200
  IF: enp5s0 state: down mac: <filter>
  Device-1: Qualcomm Atheros QCA61x4 Bluetooth 4.0 type: USB driver: btusb
    v: 0.8 bus-ID: 1-10:3 chip-ID: 0cf3:e300 class-ID: e001
  Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
  Local Storage: total: 1.14 TiB used: 21.75 GiB (1.9%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: HGST (Hitachi) model: HTS541010B7E610
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
    speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter> rev: 1A01
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Toshiba model: THNSNJ256G8NY
    size: 238.47 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 0101 scheme: GPT
  ID-1: / raw-size: 221.11 GiB size: 221.11 GiB (100.00%)
    used: 21.75 GiB (9.8%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 576 KiB (0.2%) fs: vfat dev: /dev/sdb1 maj-min: 8:17
  ID-3: /home raw-size: 221.11 GiB size: 221.11 GiB (100.00%)
    used: 21.75 GiB (9.8%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
  ID-4: /var/log raw-size: 221.11 GiB size: 221.11 GiB (100.00%)
    used: 21.75 GiB (9.8%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
  ID-5: /var/tmp raw-size: 221.11 GiB size: 221.11 GiB (100.00%)
    used: 21.75 GiB (9.8%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: partition size: 17.06 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/sdb3 maj-min: 8:19
  ID-2: swap-2 type: zram size: 15.51 GiB used: 0 KiB (0.0%) priority: 100
    dev: /dev/zram0
  System Temperatures: cpu: 50.0 C pch: 45.0 C mobo: 27.8 C
  Fan Speeds (RPM): N/A
  Processes: 257 Uptime: 9m wakeups: 3 Memory: 15.51 GiB
  used: 2.8 GiB (18.1%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.2.0 clang: 13.0.1 Packages: pacman: 1487 lib: 345 Shell: fish
  v: 3.4.1 default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.15
e[1;34mGaruda (2.6.1-3):e[0m
e[1;34m  System install date:e[0m     2022-04-16
e[1;34m  Last full system update:e[0m 2022-04-16
e[1;34m  Is partially upgraded:  e[0m No
e[1;34m  Relevant software:      e[0m NetworkManager
e[1;34m  Windows dual boot:      e[0m No/Undetected
e[1;34m  Snapshots:              e[0m Snapper
e[1;34m  Failed units:           e[0m

Apparently you have added a custom database to your pacman.conf but either have not provided the correct location or don't actually have a database file on disk.

1 Like

No, it is a fresh install without any modifaction

If it was unmodified then it wouldn't be having this problem.

Please paste /etc/pacman.conf .

1 Like
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives

# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir     = /
#DBPath      = /var/lib/pacman/
CacheDir = /var/cache/pacman/pkg/
#LogFile     = /var/log/pacman.log
#GPGDir      = /etc/pacman.d/gnupg/
#HookDir     = /etc/pacman.d/hooks/
HoldPkg      = pacman glibc garuda-system
#XferCommand = /usr/bin/curl -L -C - -f -o %o %u
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto

# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg   =
#IgnoreGroup =

#NoUpgrade   =
#NoExtract   =

# Misc options
ParallelDownloads = 5

# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel    = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required

# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.

#   - can be defined here or included from another file
#   - pacman will search repositories in the order defined here
#   - local/custom mirrors can be added here or in separate files
#   - repositories listed first will take precedence when packages
#     have identical names, regardless of version number
#   - URLs will have $repo replaced by the name of the current repo
#   - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
#       [repo-name]
#       Server = ServerName
#       Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.


Include = /etc/pacman.d/mirrorlist


Include = /etc/pacman.d/mirrorlist


Include = /etc/pacman.d/mirrorlist


Include = /etc/pacman.d/mirrorlist


Include = /etc/pacman.d/chaotic-mirrorlist

# An example of a custom package repository.  See the pacman manpage for
# tips on creating your own repositories.
SigLevel = Optional TrustAll
Server = file:///home/custompkgs

You have uncommented this section and enabled a "custom" repository.

Comment out those lines (by placing a # at the start of each line) then run a pacman -Syu .

1 Like

Thank you, its get to work again

Definiere Modifikation. :slight_smile:

In the future please refrain from doing dumbshit stuff like that then posting a help request when you can't decipher the outcome. All you accomplish is placing an undo burden on users who don't do dumbshit stuff. Especially if denial is part of your practice. Those lines did not unremark themselves.

(Yeah, I may be a bit harsh. Eight posts to resolve a nothing burger. Ridiculous. )

1 Like

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.