Error "couldn't access control socket" when opening terminal

Hi everyone.
(sorry in advance if I do anything wrong, first post here)

I've been getting a weird error at the top of my terminal every time I open a new one. Until today it didn't affect anything I did so I didn't address it but today I wanted to "debtap" a package and the same error was thrown so I started searching for causes and fixes.

I saw this post

https://bbs.archlinux.org/viewtopic.php?pid=1640936#p1640936

that shows a similar problem and a solution, but running

sudo pwck
sudo grpck

and checking the /etc/passwd and /etc/group with

sudo vipw
sudo vigr

I didn't see any user or group that shouldn't be there.
So now i'm looking for help to fix this issue! And thank you in advance for the help!!

The full error message on the top of the terminal is:

couldn't access control socket: /run/user/1000/keyring SSH_AUTH_SOCK /run/user/1000/keyring/ssh/control: No such file or directory
discover_other_daemon: 1 

The full error message when I tried to debtap:

couldn't access control socket: /run/user/1000/keyring SSH_AUTH_SOCK /run/user/1000/
keyring/ssh/control: No such file or directory
discover_other_daemon: 1Incorrect parameters
mv: impossible to get information for '*.zst': No such file or directory

Running debtap as root doesn't show the error message, only the "Incorrect parameters
mv: impossible to get information for '*.zst': No such file or directory"

My garuda-inxi output:

System:
Kernel: 5.19.10-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=75a46e81-f4b1-4d97-8f31-411c88687e45 rw [email protected]
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.25.5 tk: Qt v: 5.15.6 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: TUF GAMING B550-PLUS (WI-FI) v: Rev X.0x
serial: <superuser required> UEFI: American Megatrends v: 2423
date: 08/10/2021
CPU:
Info: model: AMD Ryzen 5 5600X bits: 64 type: MT MCP arch: Zen 3 gen: 4
level: v3 built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 32 MiB desc: 1x32 MiB
Speed (MHz): avg: 3705 high: 3763 min/max: 2200/4650 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 3700 2: 3700
3: 3700 4: 3700 5: 3700 6: 3700 7: 3700 8: 3700 9: 3763 10: 3700 11: 3700
12: 3700 bogomips: 88808
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: mmio_stale_data status: Not affected
Type: retbleed status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, IBPB: conditional, IBRS_FW,
STIBP: always-on, RSB filling, PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: NVIDIA GA104 [GeForce RTX 3060 Ti Lite Hash Rate] vendor: ASUSTeK
driver: nvidia v: 515.76 alternate: nouveau,nvidia_drm non-free: 515.xx+
status: current (as of 2022-08) arch: Ampere code: GAxxx process: TSMC n7
(7nm) built: 2020-22 pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max:
gen: 4 speed: 16 GT/s bus-ID: 08:00.0 chip-ID: 10de:2489 class-ID: 0300
Device-2: Trust USB Camera type: USB driver: snd-usb-audio,uvcvideo
bus-ID: 3-2:3 chip-ID: 145f:0203 class-ID: 0102 serial: <filter>
Display: x11 server: X.Org v: 21.1.4 with: Xwayland v: 22.1.3
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1080 s-dpi: 81 s-size: 803x343mm (31.61x13.50")
s-diag: 873mm (34.38")
Monitor-1: DP-2 res: 2560x1080 dpi: 81 size: 798x334mm (31.42x13.15")
diag: 865mm (34.06") modes: N/A
OpenGL: renderer: NVIDIA GeForce RTX 3060 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA
515.76 direct render: Yes
Audio:
Device-1: NVIDIA GA104 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel bus-ID: 3-2:3 v: kernel chip-ID: 145f:0203 pcie:
class-ID: 0102 gen: 4 speed: 16 GT/s serial: <filter> lanes: 16
bus-ID: 08:00.1 chip-ID: 10de:228b class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0a:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Trust USB Camera type: USB driver: snd-usb-audio,uvcvideo
Sound Server-1: ALSA v: k5.19.10-zen1-1-zen running: yes
Sound Server-2: JACK v: 1.9.21 running: no
Sound Server-3: PulseAudio v: 16.1 running: no
Sound Server-4: PipeWire v: 0.3.58 running: yes
Network:
Device-1: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 06:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp6s0 state: up mac: <filter>
Device-2: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: f000 bus-ID: 07:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
IF-ID-1: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX200 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 1-5:2 chip-ID: 8087:0029 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 1 state: down
bt-service: enabled,running rfk-block: hardware: no software: yes
address: <filter>
Drives:
Local Storage: total: 5.46 TiB used: 3.29 TiB (60.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:2 vendor: Western Digital
model: WDS100T3X0C-00SJG0 size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 111130WD temp: 34.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: KIOXIA model: EXCERIA SSD
size: 931.51 GiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter> rev: ECFA12.9
temp: 35.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Seagate model: ST4000DM004-2CV104
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 5425 serial: <filter> rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 931.26 GiB size: 931.26 GiB (100.00%) used: 540.35 GiB
(58.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%) used: 25.5 MiB
(10.0%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:3
ID-3: /home raw-size: 931.26 GiB size: 931.26 GiB (100.00%) used: 540.35
GiB (58.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
ID-4: /var/log raw-size: 931.26 GiB size: 931.26 GiB (100.00%) used: 540.35
GiB (58.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
ID-5: /var/tmp raw-size: 931.26 GiB size: 931.26 GiB (100.00%) used: 540.35
GiB (58.0%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:4
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 31.26 GiB used: 2.2 MiB (0.0%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 37.5 C mobo: N/A gpu: nvidia temp: 41 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%
Info:
Processes: 372 Uptime: 23m wakeups: 0 Memory: 31.26 GiB used: 3.84 GiB
(12.3%) Init: systemd v: 251 default: graphical tool: systemctl
Compilers: gcc: 12.2.0 clang: 14.0.6 Packages: 1757 pm: pacman pkgs: 1753
libs: 470 tools: octopi,paru,yay pm: flatpak pkgs: 4 Shell: fish v: 3.5.1
running-in: konsole inxi: 3.3.21
Garuda (2.6.7-1):
System install date:     2021-11-25
Last full system update: 2022-09-25
Is partially upgraded:   No
Relevant software:       NetworkManager
Windows dual boot:       Probably (Run as root to verify)
Snapshots:               Snapper
Failed units:

For the error on top of your terminal, try resetting your fish config (and whatever other shells you use) in Garuda Assistant.
Source: GNOME/Keyring - ArchWiki under "6.5" section.

As for the debtap issue, I couldn't find information on that exact error, but maybe somebody experienced on using debtap will chime in on that.

2 Likes

Thank you, editing my config.fish solved the issue.
For the debtap portion I just found a issue on their github adressing this error

It's marked as solved but looks like it's back. I already commented on the issue and will see if I can help on that side.

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.