Elgato Wave 3 resetting Gain value after reboot

Hello there.

First time poster and first time user of Garuda Linux.

My issue: So i am using a Elgato Wave 3 USB mic and i have a weird issue with it.

Whenever i restart the system, with either a reboot or a full powerdown, the mic resets the Gain value i manually set on the mic itself with a knob.

I have tested swapping the sound output to Pro Audio for the mic and after that done a reboot, but it still resets the gain.

I have tested swapping the sound output to Analog Stereo for the mic and after that done a reboot, but it still resets the gain.

And on some of the sound outputs it even did not register my voice at all, can’t remember exactly which ones now though, since i fiddled with it quite a bit yesterday.

As it is now, the mic works with the Analog Stereo + Mono Input, but it does the gain reset after every reboot.

// Tri

System:
Kernel: 6.14.7-zen2-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=c227ee35-5559-4409-9bd0-27cc8d5c621d rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.3.5 tk: Qt v: N/A info: frameworks v: 6.14.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: ROG CROSSHAIR VIII HERO (WI-FI) v: Rev X.0x
serial: <superuser required> part-nu: SKU uuid: <superuser required>
UEFI: American Megatrends v: 3801 date: 07/30/2021
CPU:
Info: model: AMD Ryzen 9 5950X bits: 64 type: MT MCP arch: Zen 3+ gen: 3
level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
model-id: 0x21 (33) stepping: 0 microcode: 0xA20102D
Topology: cpus: 1x dies: 1 clusters: 1 cores: 16 threads: 32 tpc: 2
smt: enabled cache: L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB
desc: 16x512 KiB L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 3489 min/max: 550/5086 boost: enabled scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 3489 2: 3489 3: 3489
4: 3489 5: 3489 6: 3489 7: 3489 8: 3489 9: 3489 10: 3489 11: 3489 12: 3489
13: 3489 14: 3489 15: 3489 16: 3489 17: 3489 18: 3489 19: 3489 20: 3489
21: 3489 22: 3489 23: 3489 24: 3489 25: 3489 26: 3489 27: 3489 28: 3489
29: 3489 30: 3489 31: 3489 32: 3489 bogomips: 217192
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 21 [Radeon RX 6800/6800 XT
/ 6900 XT] vendor: Gigabyte driver: amdgpu v: kernel arch: RDNA-2
code: Navi-2x process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 4
speed: 16 GT/s lanes: 16 ports: active: DP-1,DP-2,HDMI-A-1
empty: HDMI-A-2,Writeback-1 bus-ID: 0d:00.0 chip-ID: 1002:73bf
class-ID: 0300
Display: wayland server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu d-rect: 3840x3240 display-ID: 0
Monitor-1: DP-1 pos: top-right model: Acer XV270 V serial: <filter>
built: 2020 res: mode: 1920x1080 hz: 165 scale: 100% (1) dpi: 82 gamma: 1.2
size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-2: DP-2 pos: bottom-r model: Acer XV270 V serial: <filter>
built: 2020 res: mode: 1920x1080 hz: 165 scale: 100% (1) dpi: 82 gamma: 1.2
size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes:
max: 1920x1080 min: 720x400
Monitor-3: HDMI-A-1 pos: middle-l model: Samsung S24E650 serial: <filter>
built: 2019 res: mode: 1920x1080 hz: 60 scale: 178% (1.78) to: 1080x1920
dpi: 94 gamma: 1.2 size: 521x293mm (20.51x11.54") diag: 598mm (23.5")
ratio: 16:9 modes: max: 1920x1080 min: 720x400
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: zink surfaceless: drv: radeonsi wayland:
drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.1-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 6900 XT (radeonsi
navi21 LLVM 19.1.7 DRM 3.61 6.14.7-zen2-1-zen) device-ID: 1002:73bf
memory: 15.62 GiB unified: no display-ID: :1.0
API: Vulkan v: 1.4.313 layers: 13 device: 0 type: discrete-gpu name: AMD
Radeon RX 6900 XT (RADV NAVI21) driver: mesa radv v: 25.1.1-arch1.1
device-ID: 1002:73bf surfaces: N/A device: 1 type: cpu name: llvmpipe
(LLVM 19.1.7 256 bits) driver: mesa llvmpipe v: 25.1.1-arch1.1 (LLVM
19.1.7) device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor gpu: corectrl wl: wayland-info
x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Advanced Micro Devices [AMD/ATI] Navi 21/23 HDMI/DP Audio
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0d:00.1 chip-ID: 1002:ab28 class-ID: 0403
Device-2: YUAN High-Tech Development vendor: Corsair Memory driver: N/A
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 bus-ID: 0e:00.0 chip-ID: 12ab:0380
class-ID: 0480
Device-3: Advanced Micro Devices [AMD] Starship/Matisse HD Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
lanes: 16 bus-ID: 10:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-4: Elgato Systems GmbH Wave:3 driver: snd-usb-audio type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1:2 chip-ID: 0fd9:0070
class-ID: fe01 serial: <filter>
Device-5: HP HyperX Cloud Alpha Wireless
driver: cdc_acm,hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 5-2:2 chip-ID: 03f0:098d
class-ID: 0a00 serial: <filter>
API: ALSA v: k6.14.7-zen2-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.4.2 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASUSTeK driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp5s0 state: down mac: <filter>
Device-2: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 06:00.0
chip-ID: 8086:1539 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-3: Intel Wi-Fi 6 AX200 driver: iwlwifi v: kernel pcie: gen: 2
speed: 5 GT/s lanes: 1 bus-ID: 07:00.0 chip-ID: 8086:2723 class-ID: 0280
IF: wlp7s0 state: down mac: <filter>
Info: services: NetworkManager,systemd-timesyncd
Bluetooth:
Device-1: Intel AX200 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-6:6 chip-ID: 8087:0029
class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 0 state: down bt-service: enabled,running
rfk-block: hardware: no software: yes address: <filter> bt-v: 5.2 lmp-v: 11
status: discoverable: no pairing: no
Drives:
Local Storage: total: 5 TiB used: 88.94 GiB (1.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Western Digital
model: WD BLACK SN7100 1TB size: 931.51 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 7615M0WD temp: 25.9 C scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Samsung model: SSD 970 EVO 500GB
size: 465.76 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 2B2QEXE7 temp: 42.9 C
scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD20EZRX-00D8PB0 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 0A80 scheme: MBR
ID-4: /dev/sdb maj-min: 8:16 vendor: Western Digital
model: WD20EZRX-00D8PB0 size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 0A80 scheme: MBR
Partition:
ID-1: / raw-size: 465.47 GiB size: 465.47 GiB (100.00%)
used: 18.8 GiB (4.0%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 616 KiB (0.2%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:1
ID-3: /home raw-size: 465.47 GiB size: 465.47 GiB (100.00%)
used: 18.8 GiB (4.0%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 465.47 GiB size: 465.47 GiB (100.00%)
used: 18.8 GiB (4.0%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 465.47 GiB size: 465.47 GiB (100.00%)
used: 18.8 GiB (4.0%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 62.69 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 32
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 35.0 C mobo: 34.0 C gpu: amdgpu temp: 57.0 C
mem: 60.0 C
Fan Speeds (rpm): cpu: 0 gpu: amdgpu fan: 0
Info:
Memory: total: 64 GiB note: est. available: 62.69 GiB used: 5.48 GiB (8.7%)
Processes: 612 Power: uptime: 23m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 25.06 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
tool: systemctl
Packages: 1625 pm: pacman pkgs: 1618 libs: 484 tools: pamac,paru,yay
pm: rpm pkgs: 0 pm: flatpak pkgs: 7 Compilers: clang: 19.1.7 gcc: 15.1.1
Shell: garuda-inxi default: fish v: 4.0.2 running-in: konsole inxi: 3.3.38
Garuda (2.7.2-1):
System install date:     2025-05-24
Last full system update: 2025-05-25
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut
Windows dual boot:       No/Undetected
Failed units:

I get the same thing happening with my Scarlett 2i2. Always resets to 68% not the 80% I had.

System:
  Kernel: 6.14.8-1-vfio arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-vfio
    root=UUID=748fc83f-8edc-436a-a837-2ebf04b7a602 rw rootflags=subvol=@
    rd.driver.pre=vfio-pci loglevel=3 iommu=1 amd_iommu=on ibt=off
  Desktop: KDE Plasma v: 6.3.5 tk: Qt v: N/A info: frameworks v: 6.14.0
    wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Desktop Mobo: ASUSTeK model: PRIME X570-P v: Rev X.0x
    serial: <superuser required> part-nu: SKU uuid: <superuser required>
    UEFI: American Megatrends v: 4021 date: 08/09/2021
CPU:
  Info: model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3+ gen: 3
    level: v3 note: check built: 2022 process: TSMC n6 (7nm) family: 0x19 (25)
    model-id: 0x21 (33) stepping: 0 microcode: 0xA20102D
  Topology: cpus: 1x dies: 1 clusters: 1 cores: 8 threads: 16 tpc: 2
    smt: enabled cache: L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB
    desc: 8x512 KiB L3: 32 MiB desc: 1x32 MiB
  Speed (MHz): avg: 4435 min/max: 550/4853 boost: enabled scaling:
    driver: amd-pstate-epp governor: performance cores: 1: 4435 2: 4435 3: 4435
    4: 4435 5: 4435 6: 4435 7: 4435 8: 4435 9: 4435 10: 4435 11: 4435 12: 4435
    13: 4435 14: 4435 15: 4435 16: 4435 bogomips: 121606
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: ASUSTeK
    driver: vfio-pci v: N/A alternate: nouveau,nvidia_drm,nvidia
    non-free: 550-570.xx+ status: current (as of 2025-04; EOL~2026-12-xx)
    arch: Pascal code: GP10x process: TSMC 16nm built: 2016-2021 pcie: gen: 1
    speed: 2.5 GT/s lanes: 4 link-max: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 04:00.0 chip-ID: 10de:1c82 class-ID: 0300
  Device-2: NVIDIA GA106 [GeForce RTX 3060 Lite Hash Rate] vendor: ASUSTeK
    driver: nvidia v: 570.153.02 alternate: nouveau,nvidia_drm
    non-free: 550-570.xx+ status: current (as of 2025-04; EOL~2026-12-xx)
    arch: Ampere code: GAxxx process: TSMC n7 (7nm) built: 2020-2023 pcie:
    gen: 4 speed: 16 GT/s lanes: 16 ports: active: none off: DP-3 empty: DP-1,
    DP-2, HDMI-A-1, HDMI-A-2 bus-ID: 09:00.0 chip-ID: 10de:2504 class-ID: 0300
  Device-3: Logitech HD Pro Webcam C920 driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-2:2
    chip-ID: 046d:082d class-ID: 0102 serial: <filter>
  Display: wayland server: X.org v: 1.21.1.16 with: Xwayland v: 24.1.6
    compositor: kwin_wayland driver: X: loaded: nvidia
    unloaded: modesetting,nouveau alternate: fbdev,nv,vesa
    gpu: nvidia,nvidia-nvswitch display-ID: 0
  Monitor-1: DP-3 model: Samsung U32J59x serial: <filter> built: 2024 res:
    mode: 3840x2160 hz: 60 scale: 100% (1) dpi: 140 gamma: 1.2
    size: 697x392mm (27.44x15.43") diag: 800mm (31.5") ratio: 16:9 modes:
    max: 3840x2160 min: 640x480
  API: EGL v: 1.5 hw: drv: nvidia nouveau drv: nvidia platforms: device: 0
    drv: nvidia device: 1 drv: nouveau device: 2 drv: swrast gbm: drv: nvidia
    surfaceless: drv: nvidia wayland: drv: nvidia x11: drv: nvidia
  API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 570.153.02
    glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 3060/PCIe/SSE2
    memory: 11.72 GiB display-ID: :1.0
  API: Vulkan v: 1.4.313 layers: 14 device: 0 type: discrete-gpu
    name: NVIDIA GeForce RTX 3060 driver: nvidia v: 570.153.02
    device-ID: 10de:2504 surfaces: N/A device: 1 type: cpu name: llvmpipe
    (LLVM 19.1.7 256 bits) driver: mesa llvmpipe v: 25.1.1-arch1.1 (LLVM
    19.1.7) device-ID: 10005:0000 surfaces: N/A
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo
    de: kscreen-console,kscreen-doctor gpu: corectrl, nvidia-settings,
    nvidia-smi wl: wayland-info x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: NVIDIA GP107GL High Definition Audio vendor: ASUSTeK
    driver: vfio-pci alternate: snd_hda_intel pcie: speed: Unknown lanes: 63
    link-max: gen: 3 speed: 8 GT/s bus-ID: 04:00.1 chip-ID: 10de:0fb9
    class-ID: 0403
  Device-2: NVIDIA GA106 High Definition Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 09:00.1 chip-ID: 10de:228e class-ID: 0403
  Device-3: Advanced Micro Devices [AMD] Starship/Matisse HD Audio
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
    lanes: 16 bus-ID: 0b:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-4: Logitech HD Pro Webcam C920 driver: snd-usb-audio,uvcvideo
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-2:2
    chip-ID: 046d:082d class-ID: 0102 serial: <filter>
  Device-5: Focusrite-Novation Scarlett 2i2 3rd Gen driver: snd-usb-audio
    type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-2.4:5
    chip-ID: 1235:8210 class-ID: 0102 serial: <filter>
  API: ALSA v: k6.14.8-1-vfio status: kernel-api with: aoss
    type: oss-emulator tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.4.2 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK RTL8111H driver: r8169 v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 05:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: virbr1 state: down mac: <filter>
  IF-ID-2: wlp6s0f3u3i2 state: down mac: <filter>
  Info: services: NetworkManager, smbd, systemd-timesyncd, wpa_supplicant
Bluetooth:
  Device-1: Realtek 802.11ac NIC driver: btusb,rtw_8821cu type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3:2 chip-ID: 0bda:c820
    class-ID: e001 serial: <filter>
  Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 4.2
    lmp-v: 8 status: discoverable: no pairing: no class-ID: 6c0104
Drives:
  Local Storage: total: 11.83 TiB used: 5.89 TiB (49.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
    model: SSD 970 EVO Plus 1TB size: 931.51 GiB block-size: physical: 512 B
    logical: 512 B speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: 2B2QEXM7 temp: 52.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Seagate model: ST4000DM004-2CV104
    size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 5425 serial: <filter> fw-rev: 0001 scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST8000VN004-3CP101
    size: 7.28 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: HDD rpm: 7200 serial: <filter> fw-rev: SC60 scheme: GPT
Partition:
  ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 597.24 GiB (64.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 616 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 597.24 GiB (64.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 597.24 GiB (64.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
    used: 597.24 GiB (64.1%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 max-streams: 16
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 44.0 C mobo: 47.0 C
  Fan Speeds (rpm): fan-1: 0 fan-2: 1106 fan-3: 0 fan-4: 960 fan-5: 3146
    fan-6: 0 fan-7: 0
Info:
  Memory: total: 32 GiB available: 31.25 GiB used: 3.92 GiB (12.5%)
  Processes: 410 Power: uptime: 11h 1m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 12.42 GiB services: org_kde_powerdevil,
    power-profiles-daemon, upowerd Init: systemd v: 257 default: graphical
    tool: systemctl
  Packages: pm: pacman pkgs: 2178 libs: 612 tools: octopi,pamac,paru,yay
    pm: flatpak pkgs: 0 Compilers: clang: 19.1.7 gcc: 15.1.1 alt: 14
    Shell: garuda-inxi default: fish v: 4.0.2 running-in: konsole inxi: 3.3.38
Garuda (2.7.2-1):
  System install date:     2024-09-28
  Last full system update: 2025-05-25
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut nvidia-dkms
  Windows dual boot:       No/Undetected
  Failed units:    

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.