Dracut Update

Gibt es mittlerweile eine offizielle Lösung für das Dracut Update Problem???

System:
  Kernel: 6.15.9-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1 clocksource: tsc
    avail: hpet,acpi_pm parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=1f858aa4-dc21-4849-9613-fd93f2269a29 rw rootflags=subvol=@ quiet loglevel=3 ibt=off
  Desktop: KDE Plasma v: 6.4.3 tk: Qt v: N/A info: frameworks v: 6.16.0 wm: kwin_wayland vt: 1
    dm: SDDM Distro: Garuda base: Arch Linux
Machine:
  Type: Desktop System: Gigabyte product: A520M S2H v: -CF serial: <superuser required>
  Mobo: Gigabyte model: A520M S2H v: x.x serial: <superuser required> uuid: <superuser required>
    UEFI: American Megatrends LLC. v: F19d date: 09/02/2024
Battery:
  Device-1: hidpp_battery_0 model: Logitech MX Ergo Multi-Device Trackball serial: <filter>
    charge: 55% (should be ignored) rechargeable: yes status: discharging
CPU:
  Info: model: AMD Ryzen 5 5600GT with Radeon Graphics bits: 64 type: MT MCP arch: Zen 3 gen: 3
    level: v3 note: check built: 2021-22 process: TSMC n7 (7nm) family: 0x19 (25) model-id: 0x50 (80)
    stepping: 0 microcode: 0xA500012
  Topology: cpus: 1x dies: 1 clusters: 1 cores: 6 threads: 12 tpc: 2 smt: enabled cache:
    L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 16 MiB desc: 1x16 MiB
  Speed (MHz): avg: 2992 min/max: 422/4669 boost: enabled scaling: driver: amd-pstate-epp
    governor: powersave cores: 1: 2992 2: 2992 3: 2992 4: 2992 5: 2992 6: 2992 7: 2992 8: 2992
    9: 2992 10: 2992 11: 2992 12: 2992 bogomips: 86237
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
  Vulnerabilities: <filter>
Graphics:
  Device-1: Advanced Micro Devices [AMD/ATI] Cezanne [Radeon Vega Series / Radeon Mobile Series]
    vendor: Gigabyte driver: amdgpu v: kernel arch: GCN-5 code: Vega process: GF 14nm built: 2017-20
    pcie: gen: 3 speed: 8 GT/s lanes: 16 ports: active: HDMI-A-1 empty: DP-1,HDMI-A-2
    bus-ID: 05:00.0 chip-ID: 1002:1638 class-ID: 0300 temp: 29.0 C
  Display: wayland server: X.org v: 1.21.1.18 with: Xwayland v: 24.1.8 compositor: kwin_wayland
    driver: X: loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi gpu: amdgpu
    display-ID: 0
  Monitor-1: HDMI-A-1 model: Dell P2210 serial: <filter> built: 2011 res: mode: 1680x1050 hz: 60
    scale: 100% (1) dpi: 90 gamma: 1.2 size: 474x296mm (18.66x11.65") diag: 559mm (22") ratio: 16:10
    modes: max: 1680x1050 min: 720x400
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi device: 1 drv: swrast
    gbm: drv: kms_swrast surfaceless: drv: radeonsi wayland: drv: radeonsi x11: drv: radeonsi
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.7-arch1.1 glx-v: 1.4
    direct-render: yes renderer: AMD Radeon Graphics (radeonsi renoir ACO DRM 3.63 6.15.9-zen1-1-zen)
    device-ID: 1002:1638 memory: 500 MiB unified: no display-ID: :1.0
  API: Vulkan v: 1.4.321 layers: 14 device: 0 type: integrated-gpu name: AMD Radeon Graphics
    (RADV RENOIR) driver: mesa radv v: 25.1.7-arch1.1 device-ID: 1002:1638 surfaces: N/A device: 1
    type: cpu name: llvmpipe (LLVM 20.1.8 256 bits) driver: mesa llvmpipe v: 25.1.7-arch1.1 (LLVM
    20.1.8) device-ID: 10005:0000 surfaces: N/A
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo de: kscreen-console,kscreen-doctor
    gpu: corectrl wl: wayland-info x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: Advanced Micro Devices [AMD/ATI] Renoir Radeon High Definition Audio
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 05:00.1
    chip-ID: 1002:1637 class-ID: 0403
  Device-2: Advanced Micro Devices [AMD] Family 17h/19h/1ah HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 05:00.6
    chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.15.9-zen1-1-zen status: kernel-api with: aoss type: oss-emulator tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.4.7 status: active with: 1: pipewire-pulse status: active
    2: wireplumber status: active 3: pipewire-alsa type: plugin 4: pw-jack type: plugin
    tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet vendor: Gigabyte
    driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 03:00.0
    chip-ID: 10ec:8168 class-ID: 0200
  IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  Info: services: NetworkManager, smbd, systemd-timesyncd
Drives:
  Local Storage: total: 931.51 GiB used: 620.97 GiB (66.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNV2S1000G size: 931.51 GiB
    block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
    fw-rev: CBG04418 temp: 24.9 C scheme: GPT
Partition:
  ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%) used: 620.97 GiB (66.7%) fs: btrfs
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%) used: 616 KiB (0.2%) fs: vfat
    dev: /dev/nvme0n1p1 maj-min: 259:1
  ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%) used: 620.97 GiB (66.7%) fs: btrfs
    dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%) used: 620.97 GiB (66.7%)
    fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
  ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%) used: 620.97 GiB (66.7%)
    fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 14.99 GiB used: 15.2 MiB (0.1%) priority: 100 comp: zstd
    avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 38.5 C mobo: 27.0 C gpu: amdgpu temp: 30.0 C
  Fan Speeds (rpm): N/A
Info:
  Memory: total: 16 GiB note: est. available: 14.99 GiB used: 3.69 GiB (24.6%)
  Processes: 330 Power: uptime: 43m states: freeze,mem,disk suspend: deep avail: s2idle
    wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume image: 5.97 GiB
    services: org_kde_powerdevil, power-profiles-daemon, upowerd Init: systemd v: 257
    default: graphical tool: systemctl
  Packages: pm: dpkg pkgs: 0 pm: pacman pkgs: 2507 libs: 582 tools: octopi, pacaur, pacseek,
    paru, pikaur, trizen, yay Compilers: clang: 20.1.8 gcc: 15.1.1 alt: 14 Client: Unknown Client:
    electron inxi: 3.3.38
Garuda (2.7.3-2):
  System install date:     2025-03-21
  Last full system update: 2025-08-04
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units:            
error: failed to commit transaction (conflicting files)
dracut: /usr/share/libalpm/hooks/60-dracut-remove.hook exists in filesystem (owned by garuda-dracut-support)
dracut: /usr/share/libalpm/hooks/90-dracut-install.hook exists in filesystem (owned by garuda-dracut-support)
dracut: /usr/share/libalpm/scripts/dracut-install exists in filesystem (owned by garuda-dracut-support)
dracut: /usr/share/libalpm/scripts/dracut-remove exists in filesystem (owned by garuda-dracut-support)
Errors occurred, no packages were upgraded.

Bitte abwarten, wird bereits daran gearbeitet.

4 Likes

Da diese Dateien vorhanden sind habe ich Sie in .bu(backup) umbenannt . dann ging mein update durch :wink:

sudo mv /usr/share/libalpm/hooks/60-dracut-remove.hook{,.bu}
sudo mv /usr/share/libalpm/hooks/90-dracut-install.hook{,.bu}
sudo mv /usr/share/libalpm/scripts/dracut-install{,.bu}
sudo mv /usr/share/libalpm/scripts/dracut-remove{,.bu}

aber wie TNE schon schreibt es wird gefixt :wink:

1 Like

Bitte lesen und rückgängig machen:

4 Likes

Danke dir :wink: die Info ist gut brauch ja nur wieder umbenennen und dann upd erneut :wink:

… das Update läuft jetzt durch, aber bringt seltsame Meldungen >>> problematisch ???

( 8/17) Updating initramfs with dracut
:: Rebuilding all initramfs due to changes in dracut files.
:: Building initramfs for linux (6.15.9-arch1-1)
:: Building fallback initramfs for linux (6.15.9-arch1-1)
Failed to add dependency on unit: Unit initrd.target does not exist
Failed to add dependency on unit: Unit initrd.target does not exist
Failed to add dependency on unit: Unit initrd.target does not exist
:: Building initramfs for linux-zen (6.15.9-zen1-1-zen)
:: Building fallback initramfs for linux-zen (6.15.9-zen1-1-zen)
Failed to add dependency on unit: Unit initrd.target does not exist
Failed to add dependency on unit: Unit initrd.target does not exist
Failed to add dependency on unit: Unit initrd.target does not exist

Kannst du ignorieren.

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.