Dependency breaks, but file is not installed

Issues & Assistance
1 
garuda-inxi 
System:
  Kernel: 6.5.5-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
    clocksource: tsc available: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=7bbfb67a-37a6-4540-bbaf-fab8447d446c rw rootflags=subvol=@
    quiet loglevel=3 ibt=off
  Desktop: MATE v: 1.26.1 info: mate-panel wm: marco v: 1.26.2 vt: 7
    dm: LightDM v: 1.32.0 Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Laptop System: Acer product: Nitro AN515-42 v: V1.13
    serial: <superuser required>
  Mobo: RR model: Freed_RRS v: V1.13 serial: <superuser required>
    UEFI: Insyde v: 1.13 date: 02/11/2019
Battery:
  ID-1: BAT1 charge: 36.6 Wh (100.0%) condition: 36.6/48.9 Wh (74.7%)
    volts: 16.2 min: 15.2 model: LG 0x41,0x43,0x31,0x34,0x42,0x38,0x4B
    type: Li-ion serial: <filter> status: not charging
CPU:
  Info: model: AMD Ryzen 5 2500U with Radeon Vega Mobile Gfx bits: 64
    type: MT MCP arch: Zen level: v3 note: check built: 2017-19 process: GF 14nm
    family: 0x17 (23) model-id: 0x11 (17) stepping: 0 microcode: 0x810100B
  Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
    L1: 384 KiB desc: d-4x32 KiB; i-4x64 KiB L2: 2 MiB desc: 4x512 KiB L3: 4 MiB
    desc: 1x4 MiB
  Speed (MHz): avg: 1768 high: 2387 min/max: 1600/2000 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 1527 2: 1600
    3: 1898 4: 1566 5: 1570 6: 1600 7: 2000 8: 2387 bogomips: 31941
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: AMD Baffin [Radeon RX 460/560D / Pro
    450/455/460/555/555X/560/560X] vendor: Acer Incorporated ALI driver: N/A
    alternate: amdgpu arch: GCN-4 code: Arctic Islands process: GF 14nm
    built: 2016-20 pcie: gen: 1 speed: 2.5 GT/s lanes: 8 link-max: gen: 3
    speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 1002:67ef class-ID: 0380
  Device-2: AMD Raven Ridge [Radeon Vega Series / Radeon Mobile Series]
    vendor: Acer Incorporated ALI driver: amdgpu v: kernel arch: GCN-5
    code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3 speed: 8 GT/s
    lanes: 16 ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 04:00.0
    chip-ID: 1002:15dd class-ID: 0300 temp: 49.0 C
  Device-3: Quanta HD Webcam driver: uvcvideo type: USB rev: 2.0
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-1:2 chip-ID: 0408:a060
    class-ID: 0e02 serial: <filter>
  Display: x11 server: X.Org v: 21.1.8 compositor: marco v: 1.26.2 driver:
    X: loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: eDP-1 mapped: eDP model: LG Display 0x05d8 built: 2018
    res: 1920x1080 hz: 60 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
    diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: swrast surfaceless: drv: radeonsi x11: drv: radeonsi
    inactive: gbm,wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 23.2.1-arch1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon Vega 8 Graphics (raven
    LLVM 16.0.6 DRM 3.54 6.5.5-zen1-1-zen) device-ID: 1002:15dd
    memory: 1000 MiB unified: no
  API: Vulkan v: 1.3.264 layers: 7 device: 0 type: integrated-gpu name: AMD
    Radeon Vega 8 Graphics (RADV RAVEN) driver: mesa radv v: 23.2.1-arch1.1
    device-ID: 1002:15dd surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
    (LLVM 16.0.6 256 bits) driver: mesa llvmpipe v: 23.2.1-arch1.1 (LLVM
    16.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
  Device-1: AMD Raven/Raven2/Fenghuang HDMI/DP Audio
    vendor: Acer Incorporated ALI driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 04:00.1 chip-ID: 1002:15de class-ID: 0403
  Device-2: AMD Family 17h/19h HD Audio vendor: Acer Incorporated ALI
    driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
    bus-ID: 04:00.6 chip-ID: 1022:15e3 class-ID: 0403
  API: ALSA v: k6.5.5-zen1-1-zen status: kernel-api with: aoss
    type: oss-emulator tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 0.3.80 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: Acer Incorporated ALI driver: r8169 v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: 2000 bus-ID: 02:00.1 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp2s0f1 state: down mac: <filter>
  Device-2: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter
    vendor: Lite-On driver: ath10k_pci v: kernel pcie: gen: 1 speed: 2.5 GT/s
    lanes: 1 bus-ID: 03:00.0 chip-ID: 168c:003e class-ID: 0280 temp: 42.0 C
  IF: wlp3s0 state: up mac: <filter>
Bluetooth:
  Device-1: Lite-On driver: btusb v: 0.8 type: USB rev: 2.0 speed: 12 Mb/s
    lanes: 1 mode: 1.1 bus-ID: 1-4:3 chip-ID: 04ca:3016 class-ID: e001
  Report: btmgmt ID: hci0 rfk-id: 4 state: up address: <filter> bt-v: 4.2
    lmp-v: 8 status: discoverable: no pairing: no class-ID: 7c010c
Drives:
  Local Storage: total: 1.02 TiB used: 752.2 GiB (72.1%)
  SMART Message: Required tool smartctl not installed. Check --recommends
  ID-1: /dev/sda maj-min: 8:0 vendor: Crucial model: CT1000MX500SSD1
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 023 scheme: MBR
  ID-2: /dev/sdb maj-min: 8:16 vendor: Kingston model: SA400M8120G
    size: 111.79 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 61E1 scheme: MBR
Partition:
  ID-1: / raw-size: 96 GiB size: 96 GiB (100.00%) used: 21.42 GiB (22.3%)
    fs: btrfs dev: /dev/sdb1 maj-min: 8:17
  ID-2: /boot/efi raw-size: 100 MiB size: 98.4 MiB (98.45%)
    used: 859 KiB (0.9%) fs: vfat dev: /dev/sdb2 maj-min: 8:18
  ID-3: /home raw-size: 931.51 GiB size: 915.82 GiB (98.32%)
    used: 730.78 GiB (79.8%) fs: ext4 dev: /dev/sda3 maj-min: 8:3
  ID-4: /var/log raw-size: 96 GiB size: 96 GiB (100.00%)
    used: 21.42 GiB (22.3%) fs: btrfs dev: /dev/sdb1 maj-min: 8:17
  ID-5: /var/tmp raw-size: 96 GiB size: 96 GiB (100.00%)
    used: 21.42 GiB (22.3%) fs: btrfs dev: /dev/sdb1 maj-min: 8:17
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 30.26 GiB used: 2.05 GiB (6.8%)
    priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 8
    dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 48.2 C mobo: N/A gpu: amdgpu temp: 48.0 C
  Fan Speeds (rpm): N/A
Info:
  Processes: 343 Uptime: 1d 2h 39m wakeups: 9 Memory: total: 32 GiB note: est.
  available: 30.26 GiB used: 10.33 GiB (34.1%) Init: systemd v: 254
  default: graphical tool: systemctl Compilers: gcc: 13.2.1 Packages: 1628
  pm: pacman pkgs: 1621 libs: 518 tools: gnome-software,octopi,pamac,paru,yay
  pm: flatpak pkgs: 7 Shell: Bash v: 5.1.16 running-in: mate-terminal
  inxi: 3.3.30
Garuda (2.6.16-1):
  System install date:     2023-08-28
  Last full system update: 2023-09-30
  Is partially upgraded:   Yes
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       No/Undetected
  Failed units                        nmb.service

When I try to update, I get this:

garuda downloading...
 core downloading...
 extra downloading...
 multilib downloading...
 chaotic-aur downloading...
:: Starting full system upgrade...
warning: vdhcoapp-git: local (2.0.0.r0.g6beaae1-1) is newer than chaotic-aur (1.6.3.r36.gedad10d-1)
resolving dependencies...
looking for conflicting packages...
error: failed to prepare transaction (could not satisfy dependencies)
:: installing kvantum (1.0.10-2) breaks dependency 'kvantum-qt5' required by garuda-mate-settings

I tried

sudo pacman -R kvantum-qt5
error: target not found: kvantum-qt5
 -> exit status 1

What do I do? Using

yay -S kvantum-qt5

returns a file not found error.

2

How about

sudo pacman -Rdd garuda-mate-settings

then

garuda-update

since garuda-mate-settings is just a pkgbuild file used to create dependencies to bundle packages and make installing them easier you can forcefully remove it and still have all it’s installed “dependencies” available in your system and not be affected in anyway.

Or, you can wait it out until nico or whoever maintains this meta package updates its dependencies since kvantum-qt5 has been renamed in the repos so you won’t find it with that name anymore.

3 Likes
3

Thanks. That did it. I appreciate the rapid reply.

4

Be aware that as KDE transitions from Plasma 5 to Plasma 6, Arch Linux’ practice during such a major change is that package names may/will be incrementally change to denote their status in their appropriate repositories. Further, there will be a mix of the two, and applications, for at least a year following.

Plasma 4 to 5 was a mess. Plasma 3 to 4 was a mess…you get the picture. Smart :monkey: 's will be transitioning from KDE Plasma to GNOME Shell.

EDIT: I finally found the source and the correct nomenclature. The Arch Forums:

KDE is close to releasing new versions of their components based on QT 6 .
During the transition period from 5 to 6 (could be longer then a year) we’ll have a mix of 5 and 6 .

The convention on archlinux for such transitions is to give the ‘older’ version a suffix and let the version without a suffix become the latest version.

All kde 5 components in the repos are currently renamed to prepare for the transition . KDE is highly modular, so there could be dozens of components installed on your system. (mine had around 30 and that’s low for KDE)

2 Likes
5

Done! This will no longer occur with updated package databases.

3 Likes
6

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.