Cat still broken

This has been closed, without being marked as a solution by me.
I still have the same issue.

System:
Kernel: 5.19.9-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=f329e146-f548-48dc-bde7-cd14ba9b2e0b rw rootflags=subvol=@
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=0798bd64-dc7e-4ea9-927a-ef60a938413d loglevel=3
Desktop: KDE Plasma v: 5.25.5 tk: Qt v: 5.15.6 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Unknown Mobo: Intel model: DG965WH v: AAD41692-304
serial: <superuser required> BIOS: Intel
v: MQ96510J.86A.0816.2006.0716.2308 date: 07/16/2006
CPU:
Info: model: Intel Core2 Quad Q6600 bits: 64 type: MCP arch: Core2 Merom
level: v2 built: 2006-09 process: Intel 65nm family: 6 model-id: 0xF (15)
stepping: 0xB (11) microcode: 0xBA
Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
desc: d-4x32 KiB; i-4x32 KiB L2: 8 MiB desc: 2x4 MiB
Speed (MHz): avg: 1981 high: 2398 min/max: 1596/2394 scaling:
driver: acpi-cpufreq governor: schedutil cores: 1: 1643 2: 2398 3: 1606
4: 2277 bogomips: 19182
Flags: ht lm nx pae sse sse2 sse3 ssse3 vmx
Vulnerabilities:
Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: EPT disabled
Type: mds status: Vulnerable: Clear CPU buffers attempted, no microcode;
SMT disabled
Type: meltdown mitigation: PTI
Type: mmio_stale_data status: Unknown: No mitigations
Type: retbleed status: Not affected
Type: spec_store_bypass status: Vulnerable
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: Retpolines, STIBP: disabled, RSB filling,
PBRSB-eIBRS: Not affected
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Cape Verde XT [Radeon HD 7770/8760 / R7 250X] vendor: PC
Partner / Sapphire driver: radeon v: kernel alternate: amdgpu arch: GCN-1
code: Southern Islands process: TSMC 28nm built: 2011-20 pcie: gen: 1
speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s ports:
active: DVI-I-1 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 01:00.0
chip-ID: 1002:683d class-ID: 0300
Display: x11 server: X.Org v: 21.1.4 with: Xwayland v: 22.1.3
compositor: kwin_x11 driver: X: loaded: radeon unloaded: modesetting
alternate: fbdev,vesa gpu: radeon display-ID: :0 screens: 1
Screen-1: 0 s-res: 1440x900 s-dpi: 96 s-size: 381x238mm (15.00x9.37")
s-diag: 449mm (17.69")
Monitor-1: DVI-I-1 mapped: DVI-0 model: HannSpree/HannStar HW191
serial: <filter> built: 2008 res: 1440x900 hz: 60 dpi: 90 gamma: 1.2
size: 408x255mm (16.06x10.04") diag: 481mm (18.9") ratio: 16:10 modes:
max: 1440x900 min: 720x400
OpenGL: renderer: AMD VERDE (LLVM 14.0.6 DRM 2.50 5.19.9-zen1-1-zen) v: 4.5
Mesa 22.1.7 direct render: Yes
Audio:
Device-1: Intel 82801H HD Audio driver: snd_hda_intel v: kernel
bus-ID: 00:1b.0 chip-ID: 8086:284b class-ID: 0403
Device-2: AMD Oland/Hainan/Cape Verde/Pitcairn HDMI Audio [Radeon HD 7000
Series] vendor: PC Partner / Sapphire driver: snd_hda_intel v: kernel
pcie: gen: 1 speed: 2.5 GT/s lanes: 16 link-max: gen: 3 speed: 8 GT/s
bus-ID: 01:00.1 chip-ID: 1002:aab0 class-ID: 0403
Device-3: C-Media CMI8738/CMI8768 PCI Audio driver: snd_cmipci v: kernel
bus-ID: 07:01.0 chip-ID: 13f6:0111 class-ID: 0401
Sound Server-1: ALSA v: k5.19.9-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 16.1 running: no
Sound Server-3: PipeWire v: 0.3.58 running: yes
Network:
Device-1: Intel 82566DC Gigabit Network driver: e1000e v: kernel port: 40e0
bus-ID: 00:19.0 chip-ID: 8086:104b class-ID: 0200
IF: enp0s25 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8192CU 802.11n WLAN Adapter type: USB
driver: rtl8192cu bus-ID: 1-4:2 chip-ID: 0bda:8178 class-ID: 0000
serial: <filter>
IF: wlp0s26f7u4 state: up mac: <filter>
Bluetooth:
Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
bus-ID: 6-2:2 chip-ID: 0bda:8771 class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 447.13 GiB used: 11.99 GiB (2.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37480G
size: 447.13 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
type: SSD serial: <filter> rev: 1103 scheme: MBR
Partition:
ID-1: / raw-size: 438.9 GiB size: 438.9 GiB (100.00%) used: 11.99 GiB
(2.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-2: /home raw-size: 438.9 GiB size: 438.9 GiB (100.00%) used: 11.99 GiB
(2.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-3: /var/log raw-size: 438.9 GiB size: 438.9 GiB (100.00%) used: 11.99
GiB (2.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
ID-4: /var/tmp raw-size: 438.9 GiB size: 438.9 GiB (100.00%) used: 11.99
GiB (2.7%) fs: btrfs dev: /dev/sda1 maj-min: 8:1
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.7 GiB used: 1.1 GiB (14.3%) priority: 100
dev: /dev/zram0
ID-2: swap-2 type: partition size: 8.23 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sda2 maj-min: 8:2
Sensors:
System Temperatures: cpu: 48.0 C mobo: N/A gpu: radeon temp: 78.0 C
Fan Speeds (RPM): N/A
Info:
Processes: 246 Uptime: 8h 48m wakeups: 0 Memory: 7.7 GiB used: 5.77 GiB
(75.0%) Init: systemd v: 251 default: graphical tool: systemctl
Compilers: gcc: 12.2.0 Packages: pm: pacman pkgs: 1282 libs: 319
tools: aura,octopi,paru Shell: fish v: 3.5.1 default: Bash v: 5.1.16
running-in: yakuake inxi: 3.3.21
Garuda (2.6.7-1):
System install date:     2022-09-10
Last full system update: 2022-09-20 ↻
Is partially upgraded:   No
Relevant software:       NetworkManager
Windows dual boot:       <superuser required>
Snapshots:               Snapper
Failed units:

Did you have a look at the linked gitlab commit? It contains the needed change (minus the afterwards fixed typo).

2 Likes

I assume the typo is the missing space?

I will put this into my config file. This doesnt update for any of us already existing users automatically?

Thanks

Just to be sure: --style header is used twice, you know this, right?

alias cat='bat --style header --style snip --style changes --style header'

It is fixed for me, thanks

The files is /etc/skel are copied to your home directory when the user is created. Modifying them won’t impact what is already in your home directory.

2 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.