Missing information requested in the template may result in not receiving assistance
Make sure you have done the following before you post:
- Search the web and forums
- Read How to search for solutions the right way | Garuda Linux wiki
- Read FAQ and Tutorials Table of Contents
Issue still unresolved? Then:
- ONE issue per topic.
- Describe your issue in detail. The more we know, the better we can help
- Show us the results of your searches, and what you’ve tried
- After rebooting, post the FULL output of
garuda-inxiin the body of the post (not linked externally, or collapsed with the “hide details” feature) - Format terminal output (including your
garuda-inxi) as a code block by clicking the preformatted text button (</>) , or put three tildes (~) above and below the text
The template above should be deleted before posting your help request.
garuda-inxi
System:
Kernel: 6.7.8-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=2168b8ff-0ab7-41b2-8739-a897b705f3e7 rw rootflags=subvol=@
quiet resume=UUID=7039b85c-9280-4b38-897e-391be8e2c00c loglevel=3 ibt=off
Desktop: Cinnamon v: 6.0.4 tk: GTK v: 3.24.41 wm: Muffin v: 6.0.1 tools:
avail: cinnamon-screensaver,xautolock vt: 7 dm: LightDM v: 1.32.0
Distro: Garuda base: Arch Linux
Machine:
Type: Laptop System: Dell product: Latitude E5440 v: 00
serial: Chassis: type: 9 serial:
Mobo: Dell model: 05JPFR v: A00 serial: part-nu: 05DE
uuid: UEFI: Dell v: A21 date: 02/01/2018
Battery:
ID-1: BAT0 charge: N/A condition: N/A volts: 7.5 min: 11.1
model: LGC-LGC3.0 DELL NVWGM44 type: Li-ion serial:
status: not charging
CPU:
Info: model: Intel Core i5-4300U bits: 64 type: MT MCP arch: Haswell
gen: core 4 level: v3 note: check built: 2013-15 process: Intel 22nm
family: 6 model-id: 0x45 (69) stepping: 1 microcode: 0x26
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 2358 high: 2495 min/max: 800/2900 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1952 2: 2494 3: 2494
4: 2495 bogomips: 19953
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Graphics:
Device-1: Intel Haswell-ULT Integrated Graphics vendor: Dell driver: i915
v: kernel arch: Gen-7.5 process: Intel 22nm built: 2013 ports: active: eDP-1
empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0 chip-ID: 8086:0a16
class-ID: 0300
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.4 driver: X:
loaded: modesetting alternate: fbdev,intel,vesa dri: crocus gpu: i915
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.21x7.99")
s-diag: 414mm (16.31")
Monitor-1: eDP-1 model: LG Display 0x03e5 built: 2012 res: 1366x768 hz: 60
dpi: 112 gamma: 1.2 size: 309x174mm (12.17x6.85") diag: 355mm (14")
ratio: 16:9 modes: 1366x768
API: EGL v: 1.5 hw: drv: intel crocus platforms: device: 0 drv: crocus
device: 1 drv: swrast surfaceless: drv: crocus x11: drv: crocus
inactive: gbm,wayland
API: OpenGL v: 4.6 compat-v: 4.5 vendor: intel mesa v: 24.0.2-arch1.2
glx-v: 1.4 direct-render: yes renderer: Mesa Intel HD Graphics 4400 (HSW
GT2) device-ID: 8086:0a16 memory: 1.46 GiB unified: yes
API: Vulkan v: 1.3.279 layers: 3 device: 0 type: integrated-gpu name: Intel
HD Graphics 4400 (HSW GT2) driver: mesa intel v: 24.0.2-arch1.2
device-ID: 8086:0a16 surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe
(LLVM 17.0.6 256 bits) driver: mesa llvmpipe v: 24.0.2-arch1.2 (LLVM
17.0.6) device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: Intel Haswell-ULT HD Audio vendor: Dell driver: snd_hda_intel
v: kernel bus-ID: 00:03.0 chip-ID: 8086:0a0c class-ID: 0403
Device-2: Intel 8 Series HD Audio vendor: Dell 8 driver: snd_hda_intel
v: kernel bus-ID: 00:1b.0 chip-ID: 8086:9c20 class-ID: 0403
API: ALSA v: k6.7.8-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Ethernet I218-LM vendor: Dell driver: e1000e v: kernel
port: f080 bus-ID: 00:19.0 chip-ID: 8086:155a class-ID: 0200
IF: eno1 state: down mac:
Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel pcie: gen: 1
speed: 2.5 GT/s lanes: 1 bus-ID: 02:00.0 chip-ID: 8086:08b1 class-ID: 0280
IF: wlp2s0 state: up mac:
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: Intel Bluetooth wireless interface driver: btusb v: 0.8 type: USB
rev: 2.0 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-1.8.2:4
chip-ID: 8087:07dc class-ID: e001
Report: btmgmt ID: hci0 rfk-id: 3 state: up address: bt-v: 4.0
lmp-v: 6 status: discoverable: no pairing: no class-ID: 6c010c
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode] driver: ahci
v: 3.0 port: f060 bus-ID: 00:1f.2 chip-ID: 8086:282a rev: N/A class-ID: 0104
Drives:
Local Storage: total: 119.24 GiB used: 27.49 GiB (23.1%)
SMART Message: Required tool smartctl not installed. Check --recommends
ID-1: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD SM841 2.5 7mm 128GB
size: 119.24 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: fw-rev: 2D0Q scheme: GPT
Partition:
ID-1: / raw-size: 39.62 GiB size: 39.62 GiB (100.00%)
used: 23.82 GiB (60.1%) fs: btrfs dev: /dev/sda8 maj-min: 8:8
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
used: 584 KiB (0.1%) fs: vfat dev: /dev/sda5 maj-min: 8:5
ID-3: /home raw-size: 14.37 GiB size: 14.37 GiB (100.00%)
used: 3.66 GiB (25.5%) fs: btrfs dev: /dev/sda7 maj-min: 8:7
ID-4: /var/log raw-size: 39.62 GiB size: 39.62 GiB (100.00%)
used: 23.82 GiB (60.1%) fs: btrfs dev: /dev/sda8 maj-min: 8:8
ID-5: /var/tmp raw-size: 39.62 GiB size: 39.62 GiB (100.00%)
used: 23.82 GiB (60.1%) fs: btrfs dev: /dev/sda8 maj-min: 8:8
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 7.66 GiB used: 692.8 MiB (8.8%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 4
dev: /dev/zram0
ID-2: swap-2 type: partition size: 4.1 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda6 maj-min: 8:6
Sensors:
System Temperatures: cpu: 51.0 C mobo: 36.0 C sodimm: SODIMM C
Fan Speeds (rpm): cpu: 3013
Info:
Memory: total: 8 GiB available: 7.66 GiB used: 3.55 GiB (46.3%)
Processes: 280 Power: uptime: 22h 57m states: freeze,mem,disk
suspend: deep avail: s2idle wakeups: 0 hibernate: platform avail: shutdown,
reboot, suspend, test_resume image: 3.05 GiB services: csd-power,upowerd
Init: systemd v: 255 default: graphical tool: systemctl
Packages: 1611 pm: pacman pkgs: 1605 libs: 481 tools: octopi,pamac,paru
pm: flatpak pkgs: 6 Compilers: clang: 17.0.6 gcc: 13.2.1 Shell: garuda-inxi
default: fish v: 3.7.0 running-in: gnome-terminal inxi: 3.3.33
Garuda (2.6.23-1):
System install date: 2024-02-03
Last full system update: 2024-03-09 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units:
I’m trying to make a package for quickgui after getting it successfully in the AUR repo. Here is the error im getting:
in repo: quickgui on master took 31ms
╰─λ makepkg -si
==> Making package: quickgui 1.2.8-1 (Sun 10 Mar 2024 10:16:00 PM EDT)
==> Checking runtime dependencies…
==> Checking buildtime dependencies…
==> Retrieving sources…
→ Found quickgui-1.2.8.tar.xz
==> Validating source files with sha256sums…
quickgui-1.2.8.tar.xz … Passed
==> Extracting sources…
→ Extracting quickgui-1.2.8.tar.xz with bsdtar
==> Removing existing $pkgdir/ directory…
==> Starting build()…
Resolving dependencies… (1.4s)
Note: intl is pinned to version 0.18.1 by flutter_localizations from the flutter SDK.
See Flutter Pinned Packages · dart-lang/sdk Wiki · GitHub for details.
Because every version of flutter_localizations from sdk depends on intl 0.18.1 and quickgui depends on intl ^0.17.0, flutter_localizations from sdk is forbidden.
So, because quickgui depends on flutter_localizations from sdk, version solving failed.
You can try the following suggestion to make the pubspec resolve:
- Try upgrading your constraint on intl: flutter pub add intl:^0.18.1
==> ERROR: A failure occurred in build().
Aborting…
I’ve tried updating flutter to version 3.19.3 as well as rebooting the pc. Apparently this is a common issue but couldn’t find it in the other forums.
