Can't launch any application from menu a few seconds after startup

[Lloron]

I recently started experiencing a behavior that prevents me from sleeping tight.

Every time I boot I literally have 3 or 4 seconds, if not none, before launching any application from the app launcher isn’t possible anymore.

My best strategy is to fire Konsole straight away, as they can be launched from there. I think at this as sub-optimal for using this machine.

A notification popup shows up informing me that (for instance)

Launching Lutris Failed
Unit [email protected] not found.

garuda-inxi
System:
Kernel: 6.10.5-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=5de29c62-d71a-43a3-866c-bf843c20003d rw rootflags=subvol=@
quiet quiet rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
ibt=off
Desktop: KDE Plasma v: 6.1.4 tk: Qt v: N/A info: frameworks v: 6.5.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Garuda base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: X570 GAMING X
serial: <superuser required> uuid: <superuser required> UEFI: American
Megatrends LLC. v: F38b date: 03/23/2023
CPU:
Info: model: AMD Ryzen 7 3700X bits: 64 type: MT MCP arch: Zen 2 gen: 3
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701030
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enatype or paste code herebled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 3881 high: 4072 min/max: 2200/4426 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 4051 2: 3961
3: 4063 4: 3600 5: 3997 6: 3689 7: 4067 8: 4070 9: 4058 10: 4072 11: 3600
12: 3600 13: 3580 14: 3600 15: 4046 16: 4057 bogomips: 114987
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT]
vendor: Gigabyte driver: amdgpu v: kernel arch: RDNA-1 code: Navi-1x
process: TSMC n7 (7nm) built: 2019-20 pcie: gen: 4 speed: 16 GT/s
lanes: 16 ports: active: DP-1 empty: DP-2,DP-3,HDMI-A-1 bus-ID: 0a:00.0
chip-ID: 1002:731f class-ID: 0300
Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.2
compositor: kwin_wayland driver: X: loaded: modesetting
alternate: fbdev,vesa dri: radeonsi gpu: amdgpu display-ID: 0
Monitor-1: DP-1 res: 2560x1440 size: N/A modes: N/A
API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi
wayland: drv: radeonsi x11: drv: radeonsi
API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 24.1.6-arch1.1
glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 5700 XT (radeonsi
navi10 LLVM 18.1.8 DRM 3.57 6.10.5-zen1-1-zen) device-ID: 1002:731f
memory: 7.81 GiB unified: no display-ID: :1.0
API: Vulkan v: 1.3.279 layers: 13 device: 0 type: discrete-gpu name: AMD
Radeon RX 5700 XT (RADV NAVI10) driver: mesa radv v: 24.1.6-arch1.1
device-ID: 1002:731f surfaces: xcb,xlib,wayland
Audio:
Device-1: AMD Navi 10 HDMI Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 0a:00.1 chip-ID: 1002:ab38
class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0c:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: BEHRINGER GmbH UMC204HD 192k driver: snd-usb-audio type: USB
rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-4:4 chip-ID: 1397:0508
class-ID: fe01
API: ALSA v: k6.10.5-zen1-1-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.2.2 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp4s0 state: down mac: <filter>
IF-ID-1: enp5s0f3u4 state: unknown speed: -1 duplex: half mac: <filter>
Info: services: NetworkManager,systemd-timesyncd
Drives:
Local Storage: total: 1.82 TiB used: 885.84 GiB (47.5%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: SNVS1000G
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: S8J41100 temp: 55.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10JMVW-11AJGS4 size: 931.48 GiB block-size: physical: 512 B
logical: 512 B type: USB rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1
tech: HDD rpm: 5400 serial: <filter> fw-rev: 1019 scheme: GPT
Partition:
ID-1: / raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 483.46 GiB (51.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 584 KiB (0.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 483.46 GiB (51.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-4: /var/log raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 483.46 GiB (51.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
ID-5: /var/tmp raw-size: 931.22 GiB size: 931.22 GiB (100.00%)
used: 483.46 GiB (51.9%) fs: btrfs dev: /dev/nvme0n1p2 maj-min: 259:2
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 15.54 GiB used: 1.73 GiB (11.1%)
priority: 100 comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 76.8 C mobo: 40.0 C gpu: amdgpu temp: 61.0 C
mem: 68.0 C
Fan Speeds (rpm): N/A gpu: amdgpu fan: 1245
Info:
Memory: total: 16 GiB available: 15.54 GiB used: 5.75 GiB (37.0%)
Processes: 402 Power: uptime: 28m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 6.18 GiB services: org_kde_powerdevil,upowerd
Init: systemd v: 256 default: graphical tool: systemctl
Packages: pm: pacman pkgs: 2188 libs: 597 tools: octopi,paru,yay
Compilers: clang: 18.1.8 gcc: 14.2.1 Shell: garuda-inxi default: Bash
v: 5.2.32 running-in: konsole inxi: 3.3.35
Garuda (2.6.26-1):
System install date:     2024-08-09
Last full system update: 2024-08-20
Is partially upgraded:   No
Relevant software:       snapper NetworkManager mkinitcpio
Windows dual boot:       No/Undetected
Failed units:

Any clue? Thank you in advance for any possible solution!

[LolFlasherNoobX]

From reference from a reddit post.

Try running sudo pacman -S plasma and reinstall plasma.
Then run sudo systemctl daemon-reload and reboot.

[RUDisCOOL]

I am a new user. I also had the same issue for the past 2 weeks. I tried everything I could but nothing helped me fix it. I also tried snapper but it did not help either ways. It is really annoying. Found similar issues on the Garuda Forum

Unable to run application after desktop is full load

Hi, i’m new in garuda linux, i need any clue about an anoying problem to start application. I know it’s sound strange but the situation is paradoxal, after login system it’s ok, i can run application from docking menu or via application launcher. After some minutes only things i have is(for example): Unit app-garuda\x2dsystem\x2dmaintenance\[email protected] not found. This has been happening for a few weeks after an update via garuda-update, at first just …