Hi all,
I am posting in the hopes of helping anyone else who is struggling to get their system set up with Garuda.
I couldn't get any of the live image options to boot to anything but a blank screen
I checked and ensured all relevant BIOS options were set with no luck
tried variations of a load of settings with no luck
booted another distro which worked, although I had to use "nomodeset" param
So, I thought I'll do the same, but adding this alone didn't fix the issue
I got put to a terminal, but it would freeze after the start graphical... or keyring... section
I finally found I could get to Garuda terminal by wiping the default kernel params and replacing with:
however after a garuda-update / sudo pacman -S nvidia-dkms , I still couldn't "startx"
generated nvidia conf and retried... it ALMOST loaded up fine... then reverted due to retaining the above kernel params from before (sending me back to terminal with no GUI)
I must admit... at this point, I gave up trying anything else (I had tried all possible iterations of params between the "use proprietary" and "use open source" boot options and absolutely nothing got me past this terminal (or got me frozen at the start graphical.. prompt)
I installed the non-dragonized version to another USB.. left it as default options for booting with nvidia drivers... and low and behold.. it boots
Not out of the woods unfortunately...
I can clarify a few points later, but I am trying to do my best to offer some help to those stuck in the same position before my attention goes somewhere else (I have ADHD lol).
Love this OS either way guys - thanks for your work!
garuda-inxi
System:
Kernel: 6.3.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/boot/vmlinuz-x86_64 lang=en_US keytable=us tz=UTC
misobasedir=garuda root=miso:LABEL=GARUDA_DR460NIZED_RAPTOR quiet
systemd.show_status=1 ibt=off driver=nonfree nouveau.modeset=0
i915.modeset=1 radeon.modeset=1
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 wm: kwin_x11 vt: 1 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Micro-Star model: MPG Z490 GAMING PLUS (MS-7C75) v: 2.0
serial: <superuser required> UEFI: American Megatrends v: A.90
date: 09/30/2021
CPU:
Info: model: Intel Core i7-10700K bits: 64 type: MT MCP arch: Comet Lake
gen: core 10 level: v3 note: check built: 2020 process: Intel 14nm family: 6
model-id: 0xA5 (165) stepping: 5 microcode: 0xF4
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 2 MiB desc: 8x256 KiB
L3: 16 MiB desc: 1x16 MiB
Speed (MHz): avg: 4900 min/max: 800/4900 scaling: driver: intel_cpufreq
governor: schedutil cores: 1: 4900 2: 4900 3: 4900 4: 4900 5: 4900 6: 4900
7: 4900 8: 4900 9: 4900 10: 4900 11: 4900 12: 4900 13: 4900 14: 4900
15: 4900 16: 4900 bogomips: 121596
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA102 [GeForce RTX 3090] driver: nvidia v: 530.41.03
alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-03) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 2 speed: 5 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 01:00.0 chip-ID: 10de:2204
class-ID: 0300
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 2560x1440 s-dpi: 108 s-size: 602x342mm (23.70x13.46")
s-diag: 692mm (27.26")
Monitor-1: DP-0 res: 2560x1440 hz: 60 dpi: 109
size: 597x336mm (23.5x13.23") diag: 685mm (26.97") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 530.41.03 renderer: NVIDIA GeForce RTX
3090/PCIe/SSE2 direct-render: Yes
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 00:1f.3 chip-ID: 8086:06c8 class-ID: 0403
Device-2: NVIDIA GA102 High Definition Audio driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 01:00.1 chip-ID: 10de:1aef class-ID: 0403
API: ALSA v: k6.3.1-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.70 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: Micro-Star MSI driver: r8169
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 3000 bus-ID: 6f:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp111s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: Realtek RTL8153 Gigabit Ethernet Adapter type: USB driver: r8152
bus-ID: 2-3.4.4:6 chip-ID: 0bda:8153 class-ID: 0000 serial: <filter>
IF: enp0s20f0u3u4u4 state: down mac: <filter>
Drives:
Local Storage: total: 3.76 TiB used: 290.8 MiB (0.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung
model: SSD 970 EVO Plus 2TB size: 1.82 TiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: 2B2QEXM7 temp: 40.9 C scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: OCZ model: VERTEX4 size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD
serial: <filter> rev: 1.5 scheme: GPT
ID-3: /dev/sdb maj-min: 8:16 vendor: OCZ model: VERTEX4 size: 476.94 GiB
block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s type: SSD
serial: <filter> rev: 1.5 scheme: GPT
ID-4: /dev/sdc maj-min: 8:32 vendor: Crucial model: CT525MX300SSD1
size: 489.05 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: R031
ID-5: /dev/sdd maj-min: 8:48 vendor: Crucial model: CT525MX300SSD1
size: 489.05 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
type: SSD serial: <filter> rev: R031 scheme: GPT
ID-6: /dev/sde maj-min: 8:64 type: USB vendor: SanDisk model: USB 3.2Gen1
size: 57.3 GiB block-size: physical: 512 B logical: 512 B type: N/A
serial: <filter> rev: 1.00 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
Message: No partition data found.
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 31.27 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 56.0 C pch: 38.0 C mobo: N/A gpu: nvidia
temp: 35 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 31%
Info:
Processes: 351 Uptime: 11m wakeups: 0 Memory: 31.27 GiB
used: 4.99 GiB (16.0%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 13.1.1 Packages: pm: pacman pkgs: 1223
libs: 322 tools: octopi,paru Shell: fish v: 3.6.1 default: Bash v: 5.1.16
running-in: konsole inxi: 3.3.26
Garuda (2.6.16-1):
System install date: 2023-05-05
Last full system update: 2023-05-05 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: <superuser required>
Failed units: snapper-cleanup.service
Hello, and welcome to the forums!
What was the exact ISO(s) name(s)? (example: garuda-dr460nized-linux-zen-230501.iso )
What did you use for the ISO(s)? It is recommended to use Ventoy for compatibility and ease.
Did you check the sha256?sha256 / SHA256SUM :sha256sum -c SHA_FILE_NAMESHA_FILE_NAME with the sha file to check the ISO (example: garuda-dr460nized-linux-zen-230501.iso.sha256)
4 Likes
Post always your terminal in- and output as text like
looks like
garuda-inxi
System:
Kernel: 5.18.15-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 12.1.1
parameters:
in forum.
I have edited your post.
4 Likes
Same. My workaround was to install the standard version.
System:
Kernel: 6.3.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=78c77c9d-0956-4227-9806-bcce1a97f446 rw [email protected]
quiet rd.luks.uuid=04e0eb0d-da62-48b0-a594-4d83011244bc quiet splash
rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 wm: kwin_x11 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: NZXT product: Z690 Taichi v: N/A serial: <filter>
Mobo: ASRock model: Z690 Taichi serial: <filter> UEFI: American
Megatrends LLC. v: 15.01 date: 02/09/2023
CPU:
Info: model: 12th Gen Intel Core i9-12900K bits: 64 type: MST AMCP
arch: Alder Lake gen: core 12 level: v3 note: check built: 2021+
process: Intel 7 (10nm ESF) family: 6 model-id: 0x97 (151) stepping: 2
microcode: 0x2C
Topology: cpus: 1x cores: 16 mt: 8 tpc: 2 st: 8 threads: 24 smt: enabled
cache: L1: 1.4 MiB desc: d-8x32 KiB, 8x48 KiB; i-8x32 KiB, 8x64 KiB
L2: 14 MiB desc: 8x1.2 MiB, 2x2 MiB L3: 30 MiB desc: 1x30 MiB
Speed (MHz): avg: 2418 high: 4944 min/max: 800/5100:5200:3900
base/boost: 3200/8500 scaling: driver: intel_pstate governor: powersave
volts: 1.0 V ext-clock: 100 MHz cores: 1: 799 2: 2816 3: 800 4: 3200
5: 1280 6: 1443 7: 800 8: 1903 9: 801 10: 3200 11: 800 12: 2135 13: 802
14: 3200 15: 4900 16: 4944 17: 3200 18: 3200 19: 2773 20: 3200 21: 2239
22: 3200 23: 3200 24: 3200 bogomips: 152985
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA GA102 [GeForce RTX 3080 Ti] driver: nvidia v: 530.41.03
alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-03) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 1 speed: 2.5 GT/s
lanes: 16 link-max: gen: 4 speed: 16 GT/s bus-ID: 01:00.0
chip-ID: 10de:2208 class-ID: 0300
Device-2: Sunplus Innovation Depstech webcam MIC type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-6.1:13 chip-ID: 1bcf:28c4
class-ID: 0102 serial: <filter>
Device-3: Tobii AB EyeChip type: USB driver: uvcvideo bus-ID: 1-7:25
chip-ID: 2104:0313 class-ID: 0e02 serial: <filter>
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting
alternate: fbdev,nouveau,nv,vesa gpu: nvidia display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 139 s-size: 702x392mm (27.64x15.43")
s-diag: 804mm (31.65")
Monitor-1: DP-0 res: 3840x2160 hz: 60 dpi: 140
size: 697x392mm (27.44x15.43") diag: 800mm (31.48") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 530.41.03 renderer: NVIDIA GeForce RTX 3080
Ti/PCIe/SSE2 direct-render: Yes
Audio:
Device-1: Intel Alder Lake-S HD Audio vendor: ASRock driver: snd_hda_intel
bus-ID: 1-3.2:6 v: kernel chip-ID: 1532:0528
alternate: snd_sof_pci_intel_tgl class-ID: 0300 bus-ID: 00:1f.3
chip-ID: 8086:7ad0 class-ID: 0403
Device-2: NVIDIA GA102 High Definition Audio driver: snd_hda_intel
v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.1
chip-ID: 10de:1aef class-ID: 0403
Device-3: Razer USA BlackShark V2 Pro type: USB
driver: hid-generic,snd-usb-audio,usbhid
Device-4: Sunplus Innovation Depstech webcam MIC type: USB
driver: snd-usb-audio,uvcvideo bus-ID: 1-6.1:13 chip-ID: 1bcf:28c4
class-ID: 0102 serial: <filter>
Device-5: Texas Instruments PCM2901 Audio Codec type: USB
driver: hid-generic,snd-usb-audio,usbhid bus-ID: 1-6.3.4:21
chip-ID: 08bb:2901 class-ID: 0300
API: ALSA v: k6.3.1-zen1-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.70 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Alder Lake-S PCH CNVi WiFi vendor: Rivet Networks
driver: iwlwifi v: kernel bus-ID: 00:14.3 chip-ID: 8086:7af0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Intel Ethernet I219-V vendor: ASRock driver: e1000e v: kernel
port: N/A bus-ID: 00:1f.6 chip-ID: 8086:1a1d class-ID: 0200
IF: enp0s31f6 state: down mac: <filter>
Device-3: Realtek Killer E3000 2.5GbE vendor: ASRock driver: r8169
v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 3000 bus-ID: 06:00.0
chip-ID: 10ec:3000 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Intel type: USB driver: btusb v: 0.8 bus-ID: 1-14:18
chip-ID: 8087:0033 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 3.64 TiB used: 16.07 GiB (0.4%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Seagate model: FireCuda 520 SSD
ZP1000GM30002 size: 931.51 GiB block-size: physical: 512 B logical: 512 B
speed: 63.2 Gb/s lanes: 4 type: SSD serial: <filter> rev: STNSC016
temp: 45.9 C scheme: GPT
SMART: yes health: PASSED on: 33d 9h cycles: 351
read-units: 21,835,871 [11.1 TB] written-units: 14,305,322 [7.32 TB]
ID-2: /dev/nvme1n1 maj-min: 259:5 model: NVME SSD 1TB size: 931.51 GiB
block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s lanes: 4
type: SSD serial: <filter> rev: 1.W.F.G2 temp: 33.9 C scheme: GPT
SMART: yes health: PASSED on: 24 hrs cycles: 15
read-units: 154,801 [79.2 GB] written-units: 164,121 [84.0 GB]
ID-3: /dev/sda maj-min: 8:0 type: USB vendor: Seagate model: Expansion
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B type: N/A
serial: <filter> rev: 0502 scheme: MBR
SMART Message: A mandatory SMART command failed. Various possible causes.
Partition:
ID-1: / raw-size: 931.21 GiB size: 931.21 GiB (100.00%)
used: 16.07 GiB (1.7%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-04e0eb0d-da62-48b0-a594-4d83011244bc
ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
used: 720 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme1n1p1
maj-min: 259:6
ID-3: /home raw-size: 931.21 GiB size: 931.21 GiB (100.00%)
used: 16.07 GiB (1.7%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-04e0eb0d-da62-48b0-a594-4d83011244bc
ID-4: /var/log raw-size: 931.21 GiB size: 931.21 GiB (100.00%)
used: 16.07 GiB (1.7%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-04e0eb0d-da62-48b0-a594-4d83011244bc
ID-5: /var/tmp raw-size: 931.21 GiB size: 931.21 GiB (100.00%)
used: 16.07 GiB (1.7%) fs: btrfs block-size: 4096 B dev: /dev/dm-0
maj-min: 254:0 mapped: luks-04e0eb0d-da62-48b0-a594-4d83011244bc
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 31.1 GiB used: 512 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 33.0 C mobo: N/A gpu: nvidia temp: 39 C
Fan Speeds (RPM): N/A gpu: nvidia fan: 35%
Info:
Processes: 451 Uptime: 1h 1m wakeups: 0 Memory: 31.1 GiB
used: 6.45 GiB (20.7%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 13.1.1 Packages: pm: pacman pkgs: 1438
libs: 375 tools: octopi,paru pm: appimage pkgs: 0 Shell: garuda-inxi (sudo)
default: Bash v: 5.1.16 running-in: konsole inxi: 3.3.26
Garuda (2.6.16-1):
System install date: 2023-05-05
Last full system update: 2023-05-05 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: Yes
Failed units:
The latest ISO itself seems to be fine since it boots in a VM so it seems to be NVIDIA issue, which I sadly can't test on my hardware.
1 Like
Correct, RTX 3060 don't boot, but with free driver.
system
20 May 2023 14:39
7
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
