Cannot boot into system after update

I am unable to boot into system after the update. It get stuck at loading initial ram disk

System:
Kernel: 6.2.13-zen-1-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=57dd850a-e11f-483b-ab38-549c6237cbeb rw rootflags=subvol=@
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.4 tk: Qt v: 5.15.9 wm: kwin_x11 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: Acer product: Nitro AN515-55 v: V2.06 serial: <filter>
Mobo: CML model: Stonic_CMS v: V2.06 serial: <filter> UEFI: Insyde v: 2.06
date: 08/20/2021
Battery:
ID-1: BAT1 charge: 35.8 Wh (83.8%) condition: 42.7/57.5 Wh (74.3%)
volts: 16.7 min: 15.4 model: LGC AP18E8M type: Li-ion serial: <filter>
status: charging
CPU:
Info: model: Intel Core i5-10300H socket: U3E1 bits: 64 type: MT MCP
arch: Comet Lake gen: core 10 level: v3 note: check built: 2020
process: Intel 14nm family: 6 model-id: 0xA5 (165) stepping: 2
microcode: 0xF4
Topology: cpus: 1x cores: 4 tpc: 2 threads: 8 smt: enabled cache:
L1: 256 KiB desc: d-4x32 KiB; i-4x32 KiB L2: 1024 KiB desc: 4x256 KiB
L3: 8 MiB desc: 1x8 MiB
Speed (MHz): avg: 1687 high: 2500 min/max: 800/4500 base/boost: 2673/8300
scaling: driver: intel_pstate governor: powersave volts: 0.8 V
ext-clock: 100 MHz cores: 1: 2500 2: 2500 3: 900 4: 800 5: 2500 6: 900
7: 900 8: 2500 bogomips: 39999
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel CometLake-H GT2 [UHD Graphics] vendor: Acer Incorporated ALI
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: HDMI-A-1 bus-ID: 0000:00:02.0
chip-ID: 8086:9bc4 class-ID: 0300
Device-2: NVIDIA GA107M [GeForce RTX 3050 Mobile]
vendor: Acer Incorporated ALI driver: nvidia v: 530.41.03
alternate: nouveau,nvidia_drm non-free: 530.xx+
status: current (as of 2023-03) arch: Ampere code: GAxxx
process: TSMC n7 (7nm) built: 2020-22 bus-ID: 0000:01:00.0
chip-ID: 10de:25a2 class-ID: 0300
Device-3: Quanta HD User Facing type: USB driver: uvcvideo bus-ID: 1-5:2
chip-ID: 0408:a061 class-ID: 0e02
Display: x11 server: X.Org v: 21.1.8 with: Xwayland v: 23.1.1
compositor: kwin_x11 driver: X: loaded: modesetting,nvidia unloaded: nouveau
alternate: fbdev,intel,nv,vesa dri: iris gpu: i915 display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
s-diag: 582mm (22.93")
Monitor-1: eDP-1 model: Najing CEC Panda 0x004d built: 2019 res: 1920x1080
hz: 144 dpi: 142 gamma: 1.2 size: 344x194mm (13.54x7.64")
diag: 395mm (15.5") ratio: 16:9 modes: 1920x1080
API: OpenGL v: 4.6 Mesa 23.0.3 renderer: Mesa Intel UHD Graphics (CML GT2)
direct-render: Yes
Audio:
Device-1: Intel Comet Lake PCH cAVS vendor: Acer Incorporated ALI
driver: snd_hda_intel v: kernel alternate: snd_soc_skl,snd_sof_pci_intel_cnl
bus-ID: 0000:00:1f.3 chip-ID: 8086:06c8 class-ID: 0403
Device-2: NVIDIA vendor: Acer Incorporated ALI driver: snd_hda_intel
v: kernel bus-ID: 0000:01:00.1 chip-ID: 10de:2291 class-ID: 0403
API: ALSA v: k6.2.13-zen-1-zen status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.70 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Comet Lake PCH CNVi WiFi driver: iwlwifi v: kernel
bus-ID: 0000:00:14.3 chip-ID: 8086:06f0 class-ID: 0280
IF: wlp0s20f3 state: up mac: <filter>
Device-2: Realtek vendor: Acer Incorporated ALI driver: r8169 v: kernel
port: 3000 bus-ID: 0000:06:00.0 chip-ID: 10ec:2600 class-ID: 0200
IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Bluetooth:
Device-1: Intel AX201 Bluetooth type: USB driver: btusb v: 0.8
bus-ID: 1-14:3 chip-ID: 8087:0026 class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 1 state: up address: <filter>
RAID:
Hardware-1: Intel 82801 Mobile SATA Controller [RAID mode]
driver: intel_nvme_remap v: N/A port: 5060 bus-ID: 0000:00:17.0
chip-ID: 8086:282a rev: class-ID: 0104
Drives:
Local Storage: total: 535.54 GiB used: 28.82 GiB (5.4%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: SK Hynix
model: HFM256GDJTNI-82A0A size: 238.47 GiB block-size: physical: 512 B
logical: 512 B type: SSD serial: <filter> rev: 11000C00 temp: 39.9 C
scheme: GPT
SMART: yes health: PASSED on: 51d 10h cycles: 4,844
read-units: 54,278,030 [27.7 TB] written-units: 26,589,626 [13.6 TB]
ID-2: /dev/nvme1n1 maj-min: 259:6 vendor: Toshiba
model: KBG40ZNV256G KIOXIA size: 238.47 GiB block-size: physical: 512 B
logical: 512 B type: SSD serial: <filter> rev: HP00AE00 temp: 38.9 C
scheme: GPT
SMART: yes health: PASSED on: 66d 7h cycles: 1,735
read-units: 3,391,885 [1.73 TB] written-units: 1,751,859 [896 GB]
ID-3: /dev/sda maj-min: 8:0 type: USB vendor: Generic model: Flash Disk
size: 58.59 GiB block-size: physical: 512 B logical: 512 B type: SSD
serial: <filter> rev: 8.01 scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 100 GiB size: 100 GiB (100.00%) used: 28.71 GiB (28.7%)
fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p1 maj-min: 259:7
ID-2: /boot/efi raw-size: 301 MiB size: 300.4 MiB (99.79%)
used: 604 KiB (0.2%) fs: vfat block-size: 512 B dev: /dev/nvme1n1p2
maj-min: 259:8
ID-3: /home raw-size: 138.18 GiB size: 138.18 GiB (100.00%)
used: 113.2 MiB (0.1%) fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p3
maj-min: 259:9
ID-4: /var/log raw-size: 100 GiB size: 100 GiB (100.00%)
used: 28.71 GiB (28.7%) fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p1
maj-min: 259:7
ID-5: /var/tmp raw-size: 100 GiB size: 100 GiB (100.00%)
used: 28.71 GiB (28.7%) fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p1
maj-min: 259:7
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.45 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 48.0 C pch: 55.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 273 Uptime: 0m wakeups: 1 Memory: 15.45 GiB
used: 1.81 GiB (11.7%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 1209
libs: 330 tools: octopi,paru Shell: garuda-inxi (sudo) default: Bash
v: 5.1.16 running-in: konsole inxi: 3.3.26
Garuda (2.6.16-1):
System install date:     2023-10-04
Last full system update: 2023-10-04
Is partially upgraded:   Yes
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       Yes
Failed units:

Use

garuda-update

again.

2 Likes

You can roll back a snapshot from grub and post the update logs from a restored system so that we can figure out what went wrong.

1 Like

Try changing this to AHCI mode in your BIOS

6 Likes

What they said. BTRFS hates that stuff unless it’s the right RAID config–I think. :arrow_heading_down: :arrow_heading_up: :arrow_right_hook: :leftwards_arrow_with_hook: :arrow_up:

But I’m old and easily confused. Who knows?

2 Likes

Hello, same problem as FOLDSAB, your advice resolved my problem, very big thanks.

1 Like

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.