garuda-inxi
System:
Kernel: 6.4.0-1-mainline arch: x86_64 bits: 64 compiler: gcc v: 13.1.1
parameters: initrd=\de87baa727104c558f205140e152e55b\6.4.0-1-mainline\initrd
root=UUID=835c1274-14e2-45df-9aef-a15fafb586ed rw rootflags=subvol=@
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
loglevel=3 ibt=off systemd.machine_id=de87baa727104c558f205140e152e55b
Desktop: KDE Plasma v: 5.27.6 tk: Qt v: 5.15.10 wm: kwin_wayland vt: 1
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
Mobo: ASUSTeK model: ROG STRIX X670E-E GAMING WIFI v: Rev 1.xx
serial: <superuser required> UEFI: American Megatrends v: 1416
date: 05/16/2023
CPU:
Info: model: AMD Ryzen 9 7950X bits: 64 type: MT MCP arch: Zen 4 gen: 5
level: v4 note: check built: 2022+ process: TSMC n5 (5nm) family: 0x19 (25)
model-id: 0x61 (97) stepping: 2 microcode: 0xA601203
Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 16 MiB desc: 16x1024 KiB
L3: 64 MiB desc: 2x32 MiB
Speed (MHz): avg: 3342 high: 4500 min/max: 3000/5880 boost: enabled
scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 4500 2: 3000
3: 4500 4: 3000 5: 3000 6: 4500 7: 3000 8: 3000 9: 3000 10: 3000 11: 3000
12: 3000 13: 3000 14: 3000 15: 4500 16: 3000 17: 4500 18: 3000 19: 3594
20: 3000 21: 3000 22: 3000 23: 3000 24: 3000 25: 4500 26: 3000 27: 3000
28: 3000 29: 2879 30: 3000 31: 3000 32: 4500 bogomips: 288141
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Navi 24 [Radeon RX 6400/6500 XT/6500M] vendor: Gigabyte
driver: amdgpu v: kernel arch: RDNA-2 code: Navi-2x process: TSMC n7 (7nm)
built: 2020-22 pcie: gen: 4 speed: 16 GT/s lanes: 16 ports:
active: HDMI-A-1 empty: DP-1 bus-ID: 03:00.0 chip-ID: 1002:743f
class-ID: 0300
Display: wayland server: X.org v: 1.21.1.8 with: Xwayland v: 23.1.2
compositor: kwin_wayland driver: X: loaded: amdgpu
unloaded: modesetting,radeon alternate: fbdev,vesa dri: radeonsi
gpu: amdgpu display-ID: 0
Monitor-1: HDMI-A-1 res: 1920x1080 size: N/A modes: N/A
API: OpenGL v: 4.6 Mesa 23.1.3 renderer: AMD Radeon RX 6500 XT (navi24
LLVM 15.0.7 DRM 3.52 6.4.0-1-mainline) direct-render: Yes
Audio:
Device-1: AMD Navi 21/23 HDMI/DP Audio driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 03:00.1 chip-ID: 1002:ab28
class-ID: 0403
Device-2: ASUSTek USB Audio driver: hid-generic,snd-usb-audio,usbhid
type: USB rev: 2.0 speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-6:4
chip-ID: 0b05:1a52 class-ID: 0300
API: ALSA v: k6.4.0-1-mainline status: kernel-api tools: N/A
Server-1: PipeWire v: 0.3.72 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Intel Wi-Fi 6 AX210/AX211/AX411 160MHz driver: iwlwifi v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 0b:00.0 chip-ID: 8086:2725
class-ID: 0280
IF: wlp11s0 state: up mac: <filter>
Device-2: Intel Ethernet I225-V vendor: ASUSTeK driver: igc v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: N/A bus-ID: 0c:00.0
chip-ID: 8086:15f3 class-ID: 0200
IF: eno1 state: down mac: <filter>
Bluetooth:
Device-1: Intel AX210 Bluetooth driver: btusb v: 0.8 type: USB rev: 2.0
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-9:2 chip-ID: 8087:0032
class-ID: e001
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 1.94 TiB used: 7.9 GiB (0.4%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:3 vendor: Samsung model: SSD 990 PRO 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: 3B2QJXD7 temp: 49.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:0 vendor: Sabrent model: Rocket 4.0 1TB
size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 63.2 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: RKT401.3 temp: 39.9 C
scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: SanDisk model: Extreme Pro
size: 119.25 GiB block-size: physical: 512 B logical: 512 B type: USB
rev: 3.0 spd: 5 Gb/s lanes: 1 mode: 3.2 gen-1x1 tech: N/A serial: <filter>
scheme: MBR
Partition:
ID-1: / raw-size: 97.66 GiB size: 97.66 GiB (100.00%) used: 7.09 GiB (7.3%)
fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:9
ID-2: /boot/efi raw-size: 9.77 GiB size: 9.76 GiB (99.90%)
used: 831.5 MiB (8.3%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:4
ID-3: /home raw-size: 97.66 GiB size: 97.66 GiB (100.00%)
used: 7.09 GiB (7.3%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:9
ID-4: /var/log raw-size: 97.66 GiB size: 97.66 GiB (100.00%)
used: 7.09 GiB (7.3%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:9
ID-5: /var/tmp raw-size: 97.66 GiB size: 97.66 GiB (100.00%)
used: 7.09 GiB (7.3%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:9
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: partition size: 126.95 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme0n1p8 maj-min: 259:10
ID-2: swap-2 type: zram size: 62.53 GiB used: 0 KiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 54.8 C mobo: N/A gpu: amdgpu temp: 46.0 C
mem: 44.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 0
Info:
Processes: 491 Uptime: 13m wakeups: 0 Memory: available: 62.53 GiB
used: 3.12 GiB (5.0%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 13.1.1 Packages: pm: pacman pkgs: 1181
libs: 327 tools: octopi,paru,yay Shell: fish v: 3.6.1 default: Bash
v: 5.1.16 running-in: konsole inxi: 3.3.27
Garuda (2.6.16-1):
System install date: 2023-07-01
Last full system update: 2023-07-01
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units:
I was wondering if it is possible to add a menu entry for booting from a usb drive when inserted . In systemd-boot?
thanks,
any help is appreciated.
