System:
Kernel: 6.1.12-1-lts arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=fba56aa6-7217-4c4a-8539-5f2d58fcd0db rw [email protected]
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resume=UUID=22648a7e-d2fd-41fe-9858-f44a902d6309 loglevel=3 ibt=off
Desktop: KDE Plasma v: 5.27.0 tk: Qt v: 5.15.8 wm: kwin_x11 vt: 1 dm: SDDM
Distroystem:
Kernel: 6.1.12-1-lts arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=fba56aa6-7217-4c4a-8539-5f2d58fcd0db rw [email protected]
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resum: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: ASUSTeK model: P8H61-M LE v: Rev x.0x
serial: <superuser required> UEFI: American Megatrends v: 0704
date: 07/18/2011
CPU:
Info: model: Intel Core i3-2100 bits: 64 type: MT MCP arch: Sandy Bridge
gen: core 2 level: v2 built: 2010-12 process: Intel 32nm family: 6
model-id: 0x2A (42) stepping: 7 microcode: 0x2F
Topology: cpus: 1x cores: 2 tpc: 2 threads: 4 smt: enabled cache:
L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB desc: 2x256 KiB
L3: 3 MiB desc: 1x3 MiB
Speed (MHz): avg: 1615 high: 1666 min/max: 1600/3100 scaling:
driver: intel_cpufreq governor: schedutil cores: 1: 1596 2: 1600 3: 1666
4: 1600 bogomips: 24744
Flags: avx ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics
vendor: ASUSTeK driver: i915 v: kernel arch: Gen-6 code: Sandybridge
process: Intel 32nm built: 2011 ports: active: none
empty: DP-1,HDMI-A-1,VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0102
class-ID: 0380
Device-2: NVIDIA GF108 [GeForce GT 730] vendor: ASUSTeK driver: nvidia
v: 390.157 alternate: nouveau,nvidia_drm non-free: series: 390.xx+
status: legacy-active (EOL~late 2022) arch: Fermi code: GF1xx
process: 40/28nm built: 2010-16 pcie: gen: 2 speed: 5 GT/s lanes: 16
bus-ID: 01:00.0 chip-ID: 10de:0f02 class-ID: 0300
Display: x11 server: X.Org v: 21.1.7 with: Xwayland v: 22.1.8
compositor: kwin_x11 driver: N/A note: X driver n/a display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 95 s-size: 513x292mm (20.20x11.50")
s-diag: 590mm (23.24")
Monitor-1: HDMI-0 res: 1920x1080 hz: 60 dpi: 96
size: 510x290mm (20.08x11.42") diag: 587mm (23.1") modes: N/A
API: OpenGL v: 4.6.0 NVIDIA 390.157 renderer: GeForce GT 730/PCIe/SSE2
direct-render: Yes
Audio:
Device-1: Intel 6 Series/C200 Series Family High Definition Audio
vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:1b.0
chip-ID: 8086:1c20 class-ID: 0403
Device-2: NVIDIA GF108 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 2 speed: 5 GT/s lanes: 16
bus-ID: 01:00.1 chip-ID: 10de:0bea class-ID: 0403
Sound API: ALSA v: k6.1.12-1-lts running: yes
Sound Server-1: PulseAudio v: 16.1 running: no
Sound Server-2: PipeWire v: 0.3.66 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: ASUSTeK P8P67 and other motherboards driver: r8169 v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 1 port: d000 bus-ID: 04:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp4s0 state: up speed: 100 Mbps duplex: full mac: <filter>
IF-ID-1: anbox0 state: down mac: <filter>
Bluetooth:
Device-1: TP-Link UB500 Adapter type: USB driver: btusb v: 0.8
bus-ID: 1-1.3:3 chip-ID: 2357:0604 class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
Local Storage: total: 3.64 TiB used: 60.67 GiB (1.6%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST4000DM004-2CV104
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B speed: 3.0 Gb/s
type: HDD rpm: 5425 serial: <filter> rev: 0001 scheme: GPT
Partition:
ID-1: / raw-size: 183.88 GiB size: 183.88 GiB (100.00%)
used: 60.67 GiB (33.0%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
used: 608 KiB (0.1%) fs: vfat dev: /dev/sda7 maj-min: 8:7
ID-3: /home raw-size: 183.88 GiB size: 183.88 GiB (100.00%)
used: 60.67 GiB (33.0%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
ID-4: /var/log raw-size: 183.88 GiB size: 183.88 GiB (100.00%)
used: 60.67 GiB (33.0%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
ID-5: /var/tmp raw-size: 183.88 GiB size: 183.88 GiB (100.00%)
used: 60.67 GiB (33.0%) fs: btrfs dev: /dev/sda9 maj-min: 8:9
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 15.54 GiB used: 31 MiB (0.2%) priority: 100
dev: /dev/zram0
ID-2: swap-2 type: partition size: 15.62 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/sda8 maj-min: 8:8
Sensors:ystem:
Kernel: 6.1.12-1-lts arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-lts
root=UUID=fba56aa6-7217-4c4a-8539-5f2d58fcd0db rw [email protected]
quiet quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
resum
System Temperatures: cpu: 51.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 214 Uptime: 1h 7m wakeups: 0 Memory: 15.54 GiB
used: 4.06 GiB (26.1%) Init: systemd v: 253 default: graphical
tool: systemctl Compilers: gcc: 12.2.1 Packages: pm: pacman pkgs: 1383
libs: 439 tools: octopi,paru Shell: fish v: 3.6.0 default: Bash v: 5.1.16
running-in: konsole inxi: 3.3.25
Garuda (2.6.15-1):
head: cannot open '/var/log/pacman.log' for reading: No such file or directory
System install date:
Last full system update: 2023-02-21
Is partially upgraded: No
Relevant software: snapper NetworkManager mkinitcpio
Windows dual boot: Probably (Run as root to verify)
Failed units: dev-binderfs.mount anbox-container-manager.service
Hello, after the recent update that migrates from latte, my blur effect is not working as expected with my other effects.
I downloaded the "TV Glitch [Burn-My-Windows]" Window Open/Close Animation, and prior to updating, when the TV Glitch animates a window opening, blur effect is not applied until the TV Glitch animation ends. But now, I can see a blur square while the TV Glitch is animating. Same with when a window closes, I can now see the blur effect while the TV Glitch effect for closing a window is animating.
Is there any setting to make it behave like how it was prior to the update, which is deactivating the blur while the TV Glitch is animating?