Hello garuda passion, i’m newbie. I have an issue on boot.
My laptop is R7 5700U, and GPU is AMD on board.
when i boot on every linux distro, my laptop is gray screen. i need to hard turn off laptop and reboot, my laptop boot normally
M$ dual boot?
Live ISO works?
yes , im dual boot and live iso works.
i have used ‘journalctl -b’ command, and i saw this error:
+ACPI BIOS ERROR (bug): could not resolve symbol [_SB.PCI0.SBRG.EC0], AE_NOT_FOUND (20240322/dswload2-162)
+ACPI BIOS ERROR: AE_NOT_FOUND, during name lookup/catalog (20240322/psobject-220)
.And here is my grub_cmdline_linux: “acpi_osi=linux”
From live ISO start calamares with
sudo -E calamares -D8
Post also here the full ISO name. Do not use developer ISO.
sudo -E calamares -D8
Here bro:3
qt.qpa.theme.dbus: Session DBus not running.
qt.qpa.theme.dbus: Application will not react to setting changes.
Check your DBus installation.
18:17:55 [1]: static Calamares::Settings* Calamares::Settings::init(bool)
ERROR: Cowardly refusing to continue startup without settings.
"/etc/calamares/settings.conf"
"/usr/share/calamares/settings.conf"
18:17:55 [1]: static Calamares::Settings* Calamares::Settings::init(bool)
ERROR: FATAL: none of the expected configuration file paths exist.
? Two questions, one answer.
Edit, also post from live ISO the
garuda-inxi
oh sorry bro, my fault:
here is my version iso:
garuda-hyprland-linux-zen-240428
garuda-inxi
System:
Kernel: 6.10.6-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 14.2.1
clocksource: hpet avail: acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=65f07747-e78b-4d8e-968e-c20e3fe37e33 rw rootflags=subvol=@
acpi_osi=Linux amdgpu.ppfeaturemask=0xffffffff ibt=off
Desktop: Hyprland v: 0.42.0 with: waybar tools:
avail: hyprlock,swayidle,swaylock vt: 1 dm: SDDM Distro: Garuda
base: Arch Linux
Machine:
Type: Laptop System: Micro-Star product: Modern 15 A5M v: REV:1.0
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: Micro-Star model: MS-155L v: REV:1.0 serial: <superuser required>
part-nu: 155L.1 uuid: <superuser required> UEFI: American Megatrends LLC.
v: E155LAMS.115 date: 07/10/2023
Battery:
ID-1: BAT1 charge: 27.9 Wh (74.6%) condition: 37.4/52.4 Wh (71.3%)
volts: 12.1 min: 11.4 model: MSI BIF0_9 type: Li-ion serial: N/A
status: charging
CPU:
Info: model: AMD Ryzen 7 5700U with Radeon Graphics bits: 64 type: MT MCP
arch: Zen 2 gen: 3 level: v3 note: check built: 2020-22
process: TSMC n7 (7nm) family: 0x17 (23) model-id: 0x68 (104) stepping: 1
microcode: 0x8608103
Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB L3: 8 MiB
desc: 2x4 MiB
Speed (MHz): avg: 673 high: 2532 min/max: 400/4372 scaling:
driver: amd-pstate-epp governor: powersave cores: 1: 400 2: 400 3: 400
4: 400 5: 400 6: 400 7: 1653 8: 400 9: 1398 10: 2532 11: 400 12: 400
13: 400 14: 400 15: 400 16: 400 bogomips: 57496
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: AMD Lucienne vendor: Micro-Star MSI driver: amdgpu v: kernel
arch: GCN-5 code: Vega process: GF 14nm built: 2017-20 pcie: gen: 3
speed: 8 GT/s lanes: 16 link-max: gen: 4 speed: 16 GT/s ports:
active: eDP-1 empty: DP-1,DP-2,HDMI-A-1 bus-ID: 04:00.0 chip-ID: 1002:164c
class-ID: 0300 temp: 44.0 C
Device-2: Bison HD Webcam driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-4:3 chip-ID: 5986:211c
class-ID: 0e02
Display: wayland server: X.org v: 1.21.1.13 with: Xwayland v: 24.1.2
compositor: Hyprland v: 0.42.0 driver: X: loaded: amdgpu
unloaded: modesetting alternate: fbdev,vesa dri: radeonsi gpu: amdgpu
display-ID: 1
Monitor-1: eDP-1 model: AU Optronics 0x2e8d built: 2019 res: 1920x1080
hz: 60 dpi: 142 gamma: 1.2 scale: 1 size: 344x194mm (13.54x7.64")
diag: 395mm (15.5") ratio: 16:9 modes: max: 1920x1080 min: 640x480
API: Vulkan v: 1.3.279 layers: 8 device: 0 type: integrated-gpu name: AMD
Radeon Graphics (RADV RENOIR) driver: mesa radv v: 24.1.6-arch1.1
device-ID: 1002:164c surfaces: xcb,xlib,wayland device: 1 type: cpu
name: llvmpipe (LLVM 18.1.8 256 bits) driver: mesa llvmpipe
v: 24.1.6-arch1.1 (LLVM 18.1.8) device-ID: 10005:0000
surfaces: xcb,xlib,wayland
API: EGL Message: EGL data requires eglinfo. Check --recommends.
Audio:
Device-1: AMD Renoir Radeon High Definition Audio driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 04:00.1 chip-ID: 1002:1637 class-ID: 0403
Device-2: AMD ACP/ACP3X/ACP6x Audio Coprocessor vendor: Micro-Star MSI
driver: snd_rn_pci_acp3x v: kernel alternate: snd_pci_acp3x, snd_pci_acp5x,
snd_pci_acp6x, snd_acp_pci, snd_rpl_pci_acp6x, snd_pci_ps,
snd_sof_amd_renoir, snd_sof_amd_rembrandt, snd_sof_amd_vangogh,
snd_sof_amd_acp63 pcie: gen: 3 speed: 8 GT/s lanes: 16 link-max: gen: 4
speed: 16 GT/s bus-ID: 04:00.5 chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h/19h HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
link-max: gen: 4 speed: 16 GT/s bus-ID: 04:00.6 chip-ID: 1022:15e3
class-ID: 0403
API: ALSA v: k6.10.6-zen1-1-zen status: kernel-api tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.2.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: MEDIATEK MT7921K Wi-Fi 6E 80MHz driver: mt7921e v: kernel pcie:
gen: 2 speed: 5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 14c3:0608
class-ID: 0280
IF: wlp1s0 state: up mac: <filter>
Info: services: NetworkManager, systemd-timesyncd, wpa_supplicant
Bluetooth:
Device-1: MediaTek Wireless_Device driver: btusb v: 0.8 type: USB rev: 2.1
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 3-3:4 chip-ID: 0e8d:0608
class-ID: e001 serial: <filter>
Report: btmgmt ID: hci0 rfk-id: 0 state: up address: <filter> bt-v: 5.2
lmp-v: 11 status: discoverable: no pairing: no class-ID: 6c010c
Drives:
Local Storage: total: 484.44 GiB used: 42.06 GiB (8.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Kingston model: OM8PCP3512F-AI1
size: 476.94 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: ECFK52.8 temp: 37.9 C
scheme: GPT
ID-2: /dev/sda maj-min: 8:0 vendor: Generic model: Flash Disk
size: 7.5 GiB block-size: physical: 512 B logical: 512 B type: USB rev: 2.0
spd: 480 Mb/s lanes: 1 mode: 2.0 tech: SSD serial: <filter> fw-rev: 8.07
scheme: MBR
SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
Partition:
ID-1: / raw-size: 109.18 GiB size: 109.18 GiB (100.00%)
used: 36.85 GiB (33.8%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
ID-2: /boot/efi raw-size: 1.95 GiB size: 1.95 GiB (99.80%)
used: 588 KiB (0.0%) fs: vfat dev: /dev/nvme0n1p5 maj-min: 259:5
ID-3: /home raw-size: 109.18 GiB size: 109.18 GiB (100.00%)
used: 36.85 GiB (33.8%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
ID-4: /var/log raw-size: 109.18 GiB size: 109.18 GiB (100.00%)
used: 36.85 GiB (33.8%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
ID-5: /var/tmp raw-size: 109.18 GiB size: 109.18 GiB (100.00%)
used: 36.85 GiB (33.8%) fs: btrfs dev: /dev/nvme0n1p6 maj-min: 259:6
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 14.98 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 16 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 51.6 C mobo: 38.0 C gpu: amdgpu temp: 45.0 C
Fan Speeds (rpm): N/A
Info:
Memory: total: 16 GiB note: est. available: 14.98 GiB used: 4.87 GiB (32.5%)
Processes: 431 Power: uptime: 20m states: freeze,mem,disk suspend: s2idle
wakeups: 0 hibernate: platform avail: shutdown, reboot, suspend, test_resume
image: 5.98 GiB services: upowerd Init: systemd v: 256 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 1477 libs: 412 tools: pacseek,paru,yay
Compilers: gcc: 14.2.1 Shell: garuda-inxi default: Bash v: 5.2.32
running-in: alacritty inxi: 3.3.35
Garuda (2.6.26-1):
System install date: 2024-08-15
Last full system update: 2024-08-28 ↻
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut
Windows dual boot: Probably (Run as root to verify)
Failed units:
- Format terminal output (including your
garuda-inxi) as a code block by clicking the preformatted text button (</>) , or put three tildes (~) above and below the text
Is there a free partition where you can have calamares installed?
It should actually always work with your hardware, I can’t think of anything at the moment.
Please search for:
honestly, thank bro very much for your fast support. I will learn about more
but i have a question, what is calamares for
kekeke , thank bro very much:> u are the best linux supporter
Btw, can you tell whether this problem started just after complete installation or was it after you updated the system ?? 
1 Like
I use the wrong avatar. 
I can’t find the one without “Bro” on it right now.
1 Like
Qed. But, as you can read, SGS is a very humorous person 
1 Like
It always depends.
You get kinder with age, or rather my tranquilizers work better. 
I prefer “sir” to “bro”, especially as we haven’t been introduced in person yet. 
3 Likes
To make sure I understand your lines posted in English correctly, I have to translate them into German
Sir, yes Sir! I love freedom and independence. Garuda comes at just the right time. If no one has thanked me for the design of this distribution in the last two days, I’ll make up for it here. /ot
1 Like
oh, man, I think it’s because my laptop hardware is not compatible with linux. Any linux distro I get that error. So is Garuda. When I boot for the first time, the screen is gray (bios error/ amdgpu error), and when I boot the second time, I can log in.
my information of my laptop is: msi modern 15 a5m, r7 5700u, gpu onboard