Black screen in all 3d applications

Hello.
I have been using Garuda since october and have not had any issues and then a few days ago started having gpu crashing to black screen in all games and having to do a hard reset. I have tried three kernels other then Zen which i have been using , i did search and only found older suggestions which i tried and didnt help such as changing or adding driver packages like amdvlk, did a garuda update, a reinstall of all packages and i reinstalled windows on a drive and installed the games i have been playing to see if any issues there to see if maybe it was my hardware and had no problems. My computer knowledge is minimal and i only get by , by searching the web. Any suggestions to this problem would be greatly appreciated.

Kernel: 5.16.16-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
Desktop: KDE Plasma v: 5.24.3 Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B450 GAMING X
serial: <superuser required> BIOS: American Megatrends LLC. v: F63a
date: 02/17/2022
CPU:
Info: 6-core model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2
rev: 0 cache: L1: 384 KiB L2: 3 MiB L3: 32 MiB
Speed (MHz): avg: 2712 high: 3902 min/max: 2200/4208 boost: enabled
cores: 1: 2544 2: 2662 3: 2101 4: 2612 5: 2417 6: 3902 7: 2209 8: 3587
9: 2246 10: 2223 11: 2260 12: 3786 bogomips: 86239
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Graphics:
Device-1: AMD Vega 10 XL/XT [Radeon RX 56/64] vendor: Tul / PowerColor
driver: amdgpu v: kernel bus-ID: 09:00.0
Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: amdgpu
unloaded: modesetting gpu: amdgpu resolution: 1: 2560x1440 2: 2560x1440
OpenGL: renderer: AMD Radeon RX Vega (VEGA10 DRM 3.44.0
5.16.16-zen1-1-zen LLVM 13.0.1)
v: 4.6 Mesa 21.3.7 direct render: Yes
Audio:
Device-1: AMD Vega 10 HDMI Audio [Radeon 56/64] driver: snd_hda_intel
v: kernel bus-ID: 09:00.1
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel bus-ID: 0b:00.4
Sound Server-1: ALSA v: k5.16.16-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel port: f000 bus-ID: 04:00.0
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 3.21 TiB used: 201.69 GiB (6.1%)
ID-1: /dev/nvme0n1 vendor: Silicon Power model: SPCC M.2 PCIe SSD
size: 953.87 GiB temp: 37.9 C
ID-2: /dev/sda vendor: Smart Modular Tech. model: SHGS31-500GS-2
size: 465.76 GiB
ID-3: /dev/sdb vendor: Seagate model: ST2000DX002-2DV164 size: 1.82 TiB
Partition:
ID-1: / size: 953.86 GiB used: 30.65 GiB (3.2%) fs: btrfs
dev: /dev/nvme0n1p1
ID-2: /home size: 953.86 GiB used: 30.65 GiB (3.2%) fs: btrfs
dev: /dev/nvme0n1p1
ID-3: /var/log size: 953.86 GiB used: 30.65 GiB (3.2%) fs: btrfs
dev: /dev/nvme0n1p1
ID-4: /var/tmp size: 953.86 GiB used: 30.65 GiB (3.2%) fs: btrfs
dev: /dev/nvme0n1p1
Swap:
ID-1: swap-1 type: zram size: 31.33 GiB used: 2 MiB (0.0%) dev: /dev/zram0
Sensors:
System Temperatures: cpu: 16.8 C mobo: 16.8 C gpu: amdgpu temp: 31.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 863
Info:
Processes: 336 Uptime: 6m Memory: 31.33 GiB used: 2.65 GiB (8.5%)
Init: systemd Compilers: gcc: 11.2.0 clang: 13.0.1 Packages: 1866
Shell: fish v: 3.3.1 inxi: 3.3.14
garuda-inxi

Your garuda-inxi output is incomplete (it got cut off I think).

What are the kernels you tried?

1 Like

Mainline , tkg-bmq and lts

System:
Kernel: 5.16.16-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=d4649e76-a627-4c7b-a94a-f4c54d1269fc rw rootflags=subvol=@
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
Desktop: KDE Plasma v: 5.24.3 tk: Qt v: 5.15.3 info: latte-dock
wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop Mobo: Gigabyte model: B450 GAMING X
serial: <superuser required> BIOS: American Megatrends LLC. v: F63a
date: 02/17/2022
CPU:
Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 2383 high: 3605 min/max: 2200/4208 boost: enabled
scaling: driver: acpi-cpufreq governor: ondemand cores: 1: 2053 2: 3604
3: 2053 4: 2196 5: 2196 6: 2195 7: 2061 8: 3605 9: 2053 10: 2192 11: 2196
12: 2196 bogomips: 86239
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2
mitigation: Retpolines, IBPB: conditional, STIBP: conditional, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Vega 10 XL/XT [Radeon RX 56/64] vendor: Tul / PowerColor
driver: amdgpu v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 ports:
active: DP-1,DP-2 empty: HDMI-A-1,HDMI-A-2 bus-ID: 09:00.0
chip-ID: 1002:687f class-ID: 0300
Display: x11 server: X.Org v: 1.21.1.3 compositor: kwin_x11 driver: X:
loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa gpu: amdgpu
display-ID: :0 screens: 1
Screen-1: 0 s-res: 5120x1440 s-dpi: 96 s-size: 1354x381mm (53.31x15.00")
s-diag: 1407mm (55.38")
Monitor-1: DP-1 mapped: DisplayPort-0 pos: primary,left
model: AOC AG322QWS4R4 serial: <filter> built: 2019 res: 2560x1440 dpi: 93
gamma: 1.2 size: 697x392mm (27.44x15.43") diag: 800mm (31.5") ratio: 16:9
modes: max: 2560x1440 min: 720x400
Monitor-2: DP-2 mapped: DisplayPort-1 pos: right model: AOC Q32G2WG3
serial: <filter> built: 2021 res: 2560x1440 dpi: 93 gamma: 1.2
size: 697x392mm (27.44x15.43") diag: 800mm (31.5") ratio: 16:9 modes:
max: 2560x1440 min: 720x400
OpenGL: renderer: AMD Radeon RX Vega (VEGA10 DRM 3.44.0
5.16.16-zen1-1-zen LLVM 13.0.1)
v: 4.6 Mesa 21.3.7 direct render: Yes
Audio:
Device-1: AMD Vega 10 HDMI Audio [Radeon 56/64] driver: snd_hda_intel
v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16 bus-ID: 09:00.1
chip-ID: 1002:aaf8 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 0b:00.4 chip-ID: 1022:1487 class-ID: 0403
Sound Server-1: ALSA v: k5.16.16-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Gigabyte driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: f000 bus-ID: 04:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 3.21 TiB used: 201.68 GiB (6.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Silicon Power
model: SPCC M.2 PCIe SSD size: 953.87 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: U0514A0 temp: 34.9 C scheme: MBR
ID-2: /dev/sda maj-min: 8:0 vendor: Smart Modular Tech.
model: SHGS31-500GS-2 size: 465.76 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0Q00
scheme: MBR
ID-3: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST2000DX002-2DV164
size: 1.82 TiB block-size: physical: 4096 B logical: 512 B speed: 6.0 Gb/s
type: HDD rpm: 7200 serial: <filter> rev: CC41 scheme: GPT
Partition:
ID-1: / raw-size: 953.86 GiB size: 953.86 GiB (100.00%)
used: 30.64 GiB (3.2%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:1
ID-2: /home raw-size: 953.86 GiB size: 953.86 GiB (100.00%)
used: 30.64 GiB (3.2%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /var/log raw-size: 953.86 GiB size: 953.86 GiB (100.00%)
used: 30.64 GiB (3.2%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:1
ID-4: /var/tmp raw-size: 953.86 GiB size: 953.86 GiB (100.00%)
used: 30.64 GiB (3.2%) fs: btrfs dev: /dev/nvme0n1p1 maj-min: 259:1
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 31.33 GiB used: 2 MiB (0.0%) priority: 100
dev: /dev/zram0
Sensors:
System Temperatures: cpu: 16.8 C mobo: 16.8 C gpu: amdgpu temp: 28.0 C
mem: 30.0 C
Fan Speeds (RPM): N/A gpu: amdgpu fan: 863
Info:
Processes: 339 Uptime: 1h 12m wakeups: 0 Memory: 31.33 GiB
used: 2.68 GiB (8.5%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.2.0 clang: 13.0.1 Packages: 1866 pacman: 1854 lib: 536 flatpak: 12
Shell: fish v: 3.3.1 default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.14
Garuda (2.5.6-2):
System install date:     2022-02-19
Last full system update: 2022-03-26
Is partially upgraded:   No
Relevant software:       NetworkManager
Windows dual boot:       <superuser required>
Snapshots:               Snapper
Failed units:            bluetooth-autoconnect.service

Sorry for bothering any one , i managed to recreate the same situation in windows and have tracked it to a failing PSU. PSU swap has solved my issue. Once again my apologies.

2 Likes

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.