System:
Kernel: 6.8.7-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=d2936222-3024-4135-9894-445c145b2409 rw rootflags=subvol=@
quiet loglevel=3 ibt=off
Desktop: KDE Plasma v: 6.0.4 tk: Qt v: N/A wm: kwin_x11 dm: SDDM
Distro: Garuda base: Arch Linux
Machine:
Type: Desktop System: ASRock product: Z790 LiveMixer v: N/A serial: N/A
Mobo: ASRock model: Z790 LiveMixer serial: <filter>
uuid: 04006b9c-7879-0000-0000-000000000000 UEFI: American Megatrends LLC.
v: 13.02 date: 12/29/2023
Battery:
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M275/M280
serial: <filter> charge: 55% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: 13th Gen Intel Core i9-13900KF bits: 64 type: MST AMCP
arch: Raptor Lake gen: core 13 level: v3 note: check built: 2022+
process: Intel 7 (10nm) family: 6 model-id: 0xB7 (183) stepping: 1
microcode: 0x122
Topology: cpus: 1x cores: 24 mt: 8 tpc: 2 st: 16 threads: 32 smt: enabled
cache: L1: 2.1 MiB desc: d-16x32 KiB, 8x48 KiB; i-8x32 KiB, 16x64 KiB
L2: 32 MiB desc: 8x2 MiB, 4x4 MiB L3: 36 MiB desc: 1x36 MiB
Speed (MHz): avg: 818 high: 1102 min/max: 800/5800:4300
base/boost: 5445/12000 scaling: driver: intel_pstate governor: powersave
volts: 1.4 V ext-clock: 100 MHz cores: 1: 800 2: 800 3: 1100 4: 800
5: 1102 6: 800 7: 800 8: 800 9: 800 10: 800 11: 800 12: 800 13: 800
14: 800 15: 800 16: 800 17: 800 18: 800 19: 800 20: 800 21: 800 22: 800
23: 800 24: 800 25: 800 26: 800 27: 800 28: 800 29: 800 30: 800 31: 800
32: 800 bogomips: 191692
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA AD103 [GeForce RTX 4080] vendor: Gigabyte driver: nvidia
v: 550.76 alternate: nouveau,nvidia_drm non-free: 550.xx+
status: current (as of 2024-04) arch: Lovelace code: AD1xx
process: TSMC n4 (5nm) built: 2022+ pcie: gen: 4 speed: 16 GT/s lanes: 16
ports: active: none off: HDMI-A-1 empty: DP-1,DP-2,DP-3 bus-ID: 01:00.0
chip-ID: 10de:2704 class-ID: 0300
Display: server: X.Org v: 21.1.13 with: Xwayland v: 23.2.6
compositor: kwin_x11 driver: X: loaded: nvidia gpu: nvidia,nvidia-nvswitch
display-ID: :0 screens: 1
Screen-1: 0 s-res: 3840x2160 s-dpi: 139 s-size: 702x392mm (27.64x15.43")
s-diag: 804mm (31.65")
Monitor-1: HDMI-A-1 mapped: HDMI-0 note: disabled model: MSI G321CU
built: 2022 res: 3840x2160 hz: 60 dpi: 140 gamma: 1.2
size: 697x392mm (27.44x15.43") diag: 800mm (31.5") ratio: 16:9 modes:
max: 3840x2160 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia
inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 550.76
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 4080/PCIe/SSE2
memory: 15.62 GiB
API: Vulkan v: 1.3.279 layers: 7 device: 0 type: discrete-gpu
name: NVIDIA GeForce RTX 4080 driver: nvidia v: 550.76 device-ID: 10de:2704
surfaces: xcb,xlib
Audio:
Device-1: Intel Raptor Lake High Definition Audio vendor: ASRock
driver: snd_hda_intel v: kernel alternate: snd_sof_pci_intel_tgl
bus-ID: 00:1f.3 chip-ID: 8086:7a50 class-ID: 0403
Device-2: NVIDIA vendor: Gigabyte driver: snd_hda_intel v: kernel pcie:
gen: 4 speed: 16 GT/s lanes: 16 bus-ID: 01:00.1 chip-ID: 10de:22bb
class-ID: 0403
API: ALSA v: k6.8.7-zen1-2-zen status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
Server-2: PipeWire v: 1.0.5 status: n/a (root, process) with:
1: pipewire-pulse status: active 2: wireplumber status: active
3: pipewire-alsa type: plugin 4: pw-jack type: plugin
tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8125 2.5GbE vendor: ASRock driver: r8169 v: kernel
pcie: gen: 2 speed: 5 GT/s lanes: 1 port: 3000 bus-ID: 03:00.0
chip-ID: 10ec:8125 class-ID: 0200
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Info: services: NetworkManager, smbd, systemd-timesyncd
Drives:
Local Storage: total: 22.28 TiB used: 10.18 TiB (45.7%)
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: TeamGroup
model: T-FORCE TM8FPZ004T size: 3.64 TiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: EIFM51.3 temp: 33.9 C scheme: GPT
SMART: yes health: PASSED on: 53d 23h cycles: 367
read-units: 18,329,349 [9.38 TB] written-units: 15,895,515 [8.13 TB]
ID-2: /dev/nvme1n1 maj-min: 259:4 vendor: Seagate model: BarraCuda Q5
ZP2000CV30001 size: 1.82 TiB block-size: physical: 512 B logical: 512 B
speed: 31.6 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: SU5SH017
temp: 31.9 C scheme: GPT
SMART: yes health: PASSED on: 1y 138d 22h cycles: 3,329
read-units: 32,896,220 [16.8 TB] written-units: 96,876,279 [49.6 TB]
ID-3: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3500418AS
family: Barracuda 7200.12 size: 465.76 GiB block-size: physical: 512 B
logical: 512 B sata: 2.6 speed: 3.0 Gb/s tech: HDD rpm: 7200
serial: <filter> fw-rev: CC38 temp: 29 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 6y 221d 0h cycles: 9703
read: 1.68 TiB written: 1.39 TiB Pre-Fail: attribute: Spin_Retry_Count
value: 100 worst: 100 threshold: 97
ID-4: /dev/sdb maj-min: 8:16 vendor: Seagate model: ST12000NM0127
size: 10.91 TiB block-size: physical: 4096 B logical: 512 B sata: 3.1
speed: 6.0 Gb/s tech: HDD rpm: 7200 serial: <filter> fw-rev: G006
temp: 33 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 35d 11h cycles: 210
read: 3.12 TiB written: 6.88 TiB Pre-Fail: attribute: Spin_Retry_Count
value: 100 worst: 100 threshold: 97
ID-5: /dev/sdc maj-min: 8:32 vendor: Western Digital
model: WD40NMZW-11GX6S1 family: Elements / My Passport (USB, AF)
size: 3.64 TiB block-size: physical: 4096 B logical: 512 B type: USB
rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0 sata: 3.1 speed: 6.0 Gb/s
tech: HDD rpm: 5400 serial: <filter> fw-rev: 1018 drive-rev: 01.01A01
temp: 40 C scheme: GPT
SMART: yes state: enabled health: PASSED on: 3y 129d 23h cycles: 668
ID-6: /dev/sdd maj-min: 8:48 vendor: Toshiba model: MQ03UBB200
family: 2.5" HDD MQ03UBB... size: 1.82 TiB block-size: physical: 4096 B
logical: 512 B type: USB rev: 2.1 spd: 480 Mb/s lanes: 1 mode: 2.0
sata: 3.0 speed: 3.0 Gb/s tech: HDD rpm: 5400 serial: <filter>
fw-rev: 5438 drive-rev: JP050U temp: 24 C scheme: MBR
SMART: yes state: enabled health: PASSED on: 4y 134d 18h cycles: 1821
Partition:
ID-1: / raw-size: 500.24 GiB size: 500.24 GiB (100.00%)
used: 381.07 GiB (76.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p1
maj-min: 259:5
ID-2: /boot/efi raw-size: 512 MiB size: 511 MiB (99.80%)
used: 648 KiB (0.1%) fs: vfat block-size: 512 B dev: /dev/nvme1n1p2
maj-min: 259:6
ID-3: /home raw-size: 500.24 GiB size: 500.24 GiB (100.00%)
used: 381.07 GiB (76.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p1
maj-min: 259:5
ID-4: /var/log raw-size: 500.24 GiB size: 500.24 GiB (100.00%)
used: 381.07 GiB (76.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p1
maj-min: 259:5
ID-5: /var/tmp raw-size: 500.24 GiB size: 500.24 GiB (100.00%)
used: 381.07 GiB (76.2%) fs: btrfs block-size: 4096 B dev: /dev/nvme1n1p1
maj-min: 259:5
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: zram size: 46.87 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 32 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 6.0 C mobo: 36.0 C gpu: nvidia temp: 36 C
Fan Speeds (rpm): fan-1: 0 fan-2: 1002 fan-3: 3169 fan-4: 0 fan-5: 925
fan-6: 0 fan-7: 0 gpu: nvidia fan: 0%
Info:
Memory: total: 48 GiB available: 46.87 GiB used: 4.25 GiB (9.1%)
Processes: 588 Power: uptime: 13m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 18.7 GiB services: org_kde_powerdevil,
power-profiles-daemon, upowerd Init: systemd v: 255 default: graphical
tool: systemctl
Packages: pm: pacman pkgs: 2287 libs: 619 tools: gnome-software, octopi,
pamac, paru Compilers: clang: 17.0.6 gcc: 13.2.1 Shell: garuda-inxi (sudo)
default: Bash v: 5.2.26 running-in: lxterminal inxi: 3.3.34
Garuda (2.6.26-1):
System install date: 2024-03-19
Last full system update: 2024-04-27
Is partially upgraded: No
Relevant software: snapper NetworkManager dracut nvidia-dkms
Windows dual boot: No/Undetected
Failed units:
Make sure you have done the following before you post:
- Search the web and forums
- Read https://wiki.garudalinux.org/en/finding-solutions
- Read https://forum.garudalinux.org/t/faq-and-tutorials-table-of-contents/2962
Issue still unresolved? Then:
- ONE issue per topic.
- Describe your issue in detail. The more we know, the better we can help
- Show us the results of your searches, and what you've tried
- After rebooting, post the FULL output of `garuda-inxi` in the body of the post (not linked externally, or collapsed with the “hide details” feature)
- Format terminal output (including your `garuda-inxi`) as a code block by clicking the preformatted text button (<kbd></></kbd>) , or put three tildes (~) above and below the text
The template above should be deleted before posting your help request.
i cannot get Bauh to start up any longer after the last update. Even tho Bauh is installed and used to run fine. This is the output if i try run it from a terminal
Traceback (most recent call last):
File “/usr/bin/bauh”, line 5, in
from bauh.app import main
ModuleNotFoundError: No module named ‘bauh’
