Backup wiederherstellung Funktioniert nicht mehr (SNAP)

Hallo habe folgendes Problem.
Meine Snaps Funktionieren nicht mehr. Wenn ich im Grub meinen Snap auswähle dann kommt nur die Fehler Meldung(Bild).

Hoffe mir kann jemand helfen :sweat_smile:

System:
  Kernel: 6.1.6-zen1-2-zen arch: x86_64 bits: 64 compiler: gcc v: 12.2.1
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=6c421f67-f369-48d5-aaa1-ae57e33e57d0 rw [email protected]
    splash rd.udev.log_priority=3 vt.global_cursor_default=0 loglevel=3
    ibt=off
  Desktop: KDE Plasma v: 5.26.5 tk: Qt v: 5.15.8 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop System: Gigabyte product: X470 AORUS ULTRA GAMING v: N/A
    serial: <superuser required>
  Mobo: Gigabyte model: X470 AORUS ULTRA GAMING-CF
    serial: <superuser required> UEFI: American Megatrends LLC. v: F62c
    date: 10/01/2021
CPU:
  Info: model: AMD Ryzen 9 3950X bits: 64 type: MT MCP arch: Zen 2 gen: 3
    level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
  Topology: cpus: 1x cores: 16 tpc: 2 threads: 32 smt: enabled cache:
    L1: 1024 KiB desc: d-16x32 KiB; i-16x32 KiB L2: 8 MiB desc: 16x512 KiB
    L3: 64 MiB desc: 4x16 MiB
  Speed (MHz): avg: 2388 high: 4300 min/max: 2200/4761 boost: enabled
    scaling: driver: acpi-cpufreq governor: schedutil cores: 1: 2566 2: 2203
    3: 2200 4: 2142 5: 4300 6: 2100 7: 2462 8: 2091 9: 2200 10: 2307 11: 3500
    12: 2163 13: 2200 14: 2200 15: 2200 16: 2200 17: 2200 18: 2200 19: 2200
    20: 2197 21: 3638 22: 2148 23: 2065 24: 2200 25: 3135 26: 2200 27: 2200
    28: 2200 29: 2200 30: 2200 31: 2200 32: 2200 bogomips: 224016
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: NVIDIA GA104 [GeForce RTX 3070] vendor: Gigabyte driver: nvidia
    v: 525.78.01 alternate: nouveau,nvidia_drm non-free: 525.xx+
    status: current (as of 2022-12) arch: Ampere code: GAxxx
    process: TSMC n7 (7nm) built: 2020-22 pcie: gen: 3 speed: 8 GT/s lanes: 16
    link-max: gen: 4 speed: 16 GT/s bus-ID: 09:00.0 chip-ID: 10de:2484
    class-ID: 0300
  Display: x11 server: X.Org v: 21.1.6 with: Xwayland v: 22.1.7
    compositor: kwin_x11 driver: N/A display-ID: :0 screens: 1
  Screen-1: 0 s-res: 4480x1440 s-dpi: 92 s-size: 1237x402mm (48.70x15.83")
    s-diag: 1301mm (51.21")
  Monitor-1: DP-2 pos: primary,right res: 2560x1440 dpi: 65024
    size: 1x1mm (0.04x0.04") diag: 1mm (0.06") modes: N/A
  Monitor-2: HDMI-0 pos: left res: 1920x1080 hz: 60 dpi: 93
    size: 527x296mm (20.75x11.65") diag: 604mm (23.8") modes: N/A
  API: OpenGL v: 4.6.0 NVIDIA 525.78.01 renderer: NVIDIA GeForce RTX
    3070/PCIe/SSE2 direct render: Yes
Audio:
  Device-1: NVIDIA GA104 High Definition Audio vendor: Gigabyte
    driver: snd_hda_intel bus-ID: 1-4:2 v: kernel chip-ID: 0951:16df pcie:
    gen: 3 class-ID: 0300 serial: <filter> speed: 8 GT/s lanes: 16 link-max:
    gen: 4 speed: 16 GT/s bus-ID: 09:00.1 chip-ID: 10de:228b class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: Gigabyte
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0b:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-3: Kingston HyperX QuadCast type: USB
    driver: hid-generic,snd-usb-audio,usbhid
  Sound API: ALSA v: k6.1.6-zen1-2-zen running: yes
  Sound Interface: sndio v: N/A running: no
  Sound Server-1: PulseAudio v: 16.1 running: no
  Sound Server-2: PipeWire v: 0.3.64 running: yes
Network:
  Device-1: Intel I211 Gigabit Network vendor: Gigabyte driver: igb v: kernel
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 06:00.0
    chip-ID: 8086:1539 class-ID: 0200
  IF: enp6s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: wg-mullvad state: unknown speed: N/A duplex: N/A mac: N/A
Bluetooth:
  Device-1: Realtek Bluetooth Radio type: USB driver: btusb v: 0.8
    bus-ID: 1-10:4 chip-ID: 0bda:8771 class-ID: e001 serial: <filter>
  Report: bt-adapter ID: hci0 rfk-id: 0 state: up address: <filter>
Drives:
  Local Storage: total: 17.28 TiB used: 3.92 TiB (22.7%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Kingston model: SA400S37480G
    size: 447.13 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 61K1
  ID-2: /dev/sdb maj-min: 8:16 vendor: SanDisk model: SDSSDH3 2T00
    size: 1.82 TiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 20RL
  ID-3: /dev/sdc maj-min: 8:32 vendor: Western Digital
    model: WD30EZRX-00SPEB0 size: 2.73 TiB block-size: physical: 4096 B
    logical: 512 B speed: 6.0 Gb/s type: HDD rpm: 5400 serial: <filter>
    rev: 0A80 scheme: GPT
  ID-4: /dev/sdd maj-min: 8:48 vendor: Western Digital
    model: WDS100T2G0A-00JH30 size: 931.52 GiB block-size: physical: 512 B
    logical: 512 B speed: 6.0 Gb/s type: SSD serial: <filter> rev: 0000
    scheme: GPT
  ID-5: /dev/sde maj-min: 8:64 type: USB model: Mass Storage Device
    size: 477.5 GiB block-size: physical: 512 B logical: 512 B type: N/A
    serial: <filter> scheme: MBR
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure?
  ID-6: /dev/sdf maj-min: 8:80 type: USB vendor: Western Digital
    model: WD120EDAZ-11F3RA0 size: 10.91 TiB block-size: physical: 4096 B
    logical: 512 B type: HDD rpm: 5400 serial: <filter> rev: 4009 scheme: GPT
Partition:
  ID-1: / raw-size: 931.22 GiB size: 3.17 TiB (348.08%) used: 1.15 TiB (36.5%)
    fs: btrfs dev: /dev/sdd2 maj-min: 8:50
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 616 KiB (0.2%) fs: vfat dev: /dev/sdd1 maj-min: 8:49
  ID-3: /home raw-size: 931.22 GiB size: 3.17 TiB (348.08%)
    used: 1.15 TiB (36.5%) fs: btrfs dev: /dev/sdd2 maj-min: 8:50
  ID-4: /var/log raw-size: 931.22 GiB size: 3.17 TiB (348.08%)
    used: 1.15 TiB (36.5%) fs: btrfs dev: /dev/sdd2 maj-min: 8:50
  ID-5: /var/tmp raw-size: 931.22 GiB size: 3.17 TiB (348.08%)
    used: 1.15 TiB (36.5%) fs: btrfs dev: /dev/sdd2 maj-min: 8:50
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 31.27 GiB used: 3.85 GiB (12.3%)
    priority: 100 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: 45.9 C mobo: 29.0 C gpu: nvidia temp: 45 C
  Fan Speeds (RPM): fan-1: 1147 fan-2: 170 fan-3: 712 gpu: nvidia fan: 0%
  Power: 12v: N/A 5v: N/A 3.3v: 1.68 vbat: 1.57
Info:
  Processes: 583 Uptime: 19h 50m wakeups: 0 Memory: 31.27 GiB
  used: 7.1 GiB (22.7%) Init: systemd v: 252 default: graphical
  tool: systemctl Compilers: gcc: 12.2.1 clang: 15.0.7 Packages: pm: dpkg
  pkgs: 0 pm: pacman pkgs: 2170 libs: 561 tools: octopi,pamac,paru,yay
  Shell: Bash v: 5.1.16 running-in: konsole inxi: 3.3.24
Garuda (2.6.14-1):
  System install date:     2022-02-22
  Last full system update: 2023-01-19 ↻
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager mkinitcpio nvidia-dkms
  Windows dual boot:       No/Undetected
  Failed units:

sbin/init does not exist - Bailing out, you are on your own. Good luck
unix.stackexchange.com › questions › sbin-init-does...
](arch linux - /sbin/init does not exist - Bailing out, you are on your own. Good luck - Unix & Linux Stack Exchange)

I'm trying to install arch linux. When I boot up, it gives me the message found below. ERROR: Root device mounted successfully, but /sbin/init does not exist ...

sbin/init does not exist - arch linux - Unix StackExchange

Root device mounted successfully, but /sbin/init does not exist - Unix ...

1 - Unix StackExchange

sbin/init doesn't exist - Bailing out - Unix & Linux Stack Exchange

Weitere Ergebnisse von unix.stackexchange.com

[Solved] Fresh installation, /sbin/init does not exist - Arch Linux Forums
bbs.archlinux.org › Installation
]([Solved] Fresh installation, /sbin/init does not exist / Installation / Arch Linux Forums)

After the installation, when I select Arch in GRUB, it displays the following message: /dev/sda2: clean, ...

Root device mounted successfully, but /sbin/init does not exist.

[SOLVED] /sbin/init does not exist. / Pacman & Package Upgrade ...

[SOLVED] Root device mounted successfully, but /sbin/init does not ...

[solved] /sbin/init does not exist / Newbie Corner / Arch Linux Forums

Weitere Ergebnisse von bbs.archlinux.org

Root device mounted successfully, but /sbin/init does not exist ...
](https://www.reddit.com/r/archlinux/comments/s4vy2a/root_device_mounted_successfully_but_sbininit/)

Mein System Bootet normal. Aber ich kann das Backup nicht mehr aufspielen. Deine Links Helfen mir bei meinem Problem nicht..