AMD graphics driver not loading, Screens black, after linux-firmware update

Issues & Assistance
1

I have updatet my system. Now only one of three monitor have a picture. So I think, I looking for the newest firmware 7 to test.

System:
  Kernel: 6.15.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=9bdc1bb8-710e-4a2b-a1fc-d771d79d9fb1 rw rootflags=subvol=@
    quiet splash amd_iommu=on ibt=off
  Desktop: Cinnamon v: 6.4.10 tk: GTK v: 3.24.49 wm: Muffin v: 6.4.1 tools:
    avail: cinnamon-screensaver,xautolock vt: 7 dm: LightDM v: 1.32.0
    Distro: Garuda base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: CROSSHAIR VI HERO v: Rev 1.xx
    serial: <superuser required> part-nu: SKU UEFI: American Megatrends v: 8801
    date: 08/30/2024
CPU:
  Info: model: AMD Ryzen 9 3900X bits: 64 type: MT MCP arch: Zen 2 gen: 2
    level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701034
  Topology: cpus: 1x dies: 1 clusters: 1 cores: 12 threads: 24 tpc: 2
    smt: enabled cache: L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 6 MiB
    desc: 12x512 KiB L3: 64 MiB desc: 4x16 MiB
  Speed (MHz): avg: 3620 min/max: 563/4674 boost: enabled scaling:
    driver: amd-pstate-epp governor: powersave cores: 1: 3620 2: 3620 3: 3620
    4: 3620 5: 3620 6: 3620 7: 3620 8: 3620 9: 3620 10: 3620 11: 3620 12: 3620
    13: 3620 14: 3620 15: 3620 16: 3620 17: 3620 18: 3620 19: 3620 20: 3620
    21: 3620 22: 3620 23: 3620 24: 3620 bogomips: 182069
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 48 [RX 9070/9070 XT]
    vendor: Tul / PowerColor driver: N/A alternate: amdgpu pcie: gen: 5
    speed: 32 GT/s lanes: 16 bus-ID: 0d:00.0 chip-ID: 1002:7550 class-ID: 0300
  Device-2: Logitech StreamCam
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-4:2 chip-ID: 046d:0893
    class-ID: 0300 serial: <filter>
  Display: x11 server: X.Org v: 21.1.18 with: Xwayland v: 24.1.8 driver: X:
    loaded: modesetting alternate: fbdev,vesa gpu: N/A display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: Unknown-1 mapped: None-1 res: mode: 1920x1080 hz: 60
    scale: 100% (1) size: N/A modes: 1920x1080
  API: EGL v: 1.5 platforms: device: 0 drv: swrast surfaceless: drv: swrast
    x11: drv: swrast inactive: gbm,wayland
  API: OpenGL v: 4.5 vendor: mesa v: 25.1.4-arch1.1 glx-v: 1.4
    direct-render: yes renderer: llvmpipe (LLVM 20.1.6 256 bits)
    device-ID: ffffffff:ffffffff memory: 30.52 GiB unified: yes
  API: Vulkan Message: No Vulkan data available.
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo de: kscreen-doctor
    gpu: amd-smi, corectrl, lact x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: Creative Labs CA0132 Sound Core3D [Sound Blaster Recon3D /
    Z-Series BlasterX AE-5 Plus] driver: snd_hda_intel v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 08:00.0 chip-ID: 1102:0012 class-ID: 0403
  Device-2: Advanced Micro Devices [AMD/ATI] driver: snd_hda_intel v: kernel
    pcie: gen: 5 speed: 32 GT/s lanes: 16 bus-ID: 0d:00.1 chip-ID: 1002:ab40
    class-ID: 0403
  Device-3: Advanced Micro Devices [AMD] Starship/Matisse HD Audio
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
    lanes: 16 bus-ID: 0f:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-4: RODE Microphones NT-USB driver: hid-generic,snd-usb-audio,usbhid
    type: USB rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:2
    chip-ID: 19f7:0003 class-ID: 0300
  Device-5: Logitech StreamCam
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-4:2 chip-ID: 046d:0893
    class-ID: 0300 serial: <filter>
  API: ALSA v: k6.15.3-zen1-1-zen status: kernel-api with: aoss
    type: oss-emulator tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.4.5 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0
    chip-ID: 8086:1539 class-ID: 0200
  IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: virbr0 state: down mac: <filter>
  Info: services: NetworkManager, sshd, systemd-timesyncd
Drives:
  Local Storage: total: 2.73 TiB used: 1.55 TiB (56.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO with
    Heatsink 1TB size: 931.51 GiB block-size: physical: 512 B logical: 512 B
    speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QGXA7
    temp: 33.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 QVO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 860 EVO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 1B6Q scheme: GPT
Partition:
  ID-1: / raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 750.98 GiB (83.7%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 616 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 750.98 GiB (83.7%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-4: /var/log raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 750.98 GiB (83.7%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-5: /var/tmp raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 750.98 GiB (83.7%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
  ID-2: swap-2 type: partition size: 34.39 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/sda3 maj-min: 8:3
Sensors:
  System Temperatures: cpu: 48.0 C mobo: 27.0 C
  Fan Speeds (rpm): cpu: 1220 case-1: 0 case-2: 0 case-3: 1054
  Power: 12v: 12.29 5v: N/A 3.3v: N/A vbat: 3.18
Info:
  Memory: total: 32 GiB available: 31.25 GiB used: 9.49 GiB (30.4%)
  Processes: 492 Power: uptime: 7m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 12.48 GiB services: csd-power,upowerd
    Init: systemd v: 257 default: graphical tool: systemctl
  Packages: 2500 pm: pacman pkgs: 2447 libs: 652 tools: octopi,paru,yay
    pm: rpm pkgs: 0 pm: flatpak pkgs: 53 Compilers: clang: 20.1.6 gcc: 15.1.1
    Shell: garuda-inxi default: fish v: 4.0.2 running-in: gnome-terminal
    inxi: 3.3.38
Garuda (2.7.2-1):
  System install date:     2024-01-20
  Last full system update: 2025-06-24
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:
2

I’ve moved your post to a separate issue to keep things organized

Seems that your graphics driver is not loading for some reason!

Can we get the output of

pacman -Qs amd
pacman -Qs firmware

Thanks!

4 Likes
3

Hello :slight_smile:

Thank you for the move.

local/amd-ucode 20250613.12fe085f-6
    Microcode update image for AMD CPUs
local/lib32-vulkan-radeon 1:25.1.4-1
    Open-source Vulkan driver for AMD GPUs - 32-bit
local/libteam 1.32-2
    Library for controlling team network device
local/linux-firmware-amdgpu 20250613.12fe085f-7
    Firmware files for Linux - Firmware for AMD Radeon GPUs
local/mhwd-amdgpu 19.1.0-1
    MHWD module-ids for amdgpu
local/opencl-amd 1:6.4.1-1
    ROCm components repackaged from AMD's Ubuntu releases (ROCr runtime, ROCm runtime, HIP runtime) - This
    package is intended to work along with the free amdgpu stack.
local/vulkan-radeon 1:25.1.4-1
    Open-source Vulkan driver for AMD GPUs
local/xf86-video-amdgpu 23.0.0-2 (xorg-drivers)
    X.org amdgpu video driver
local/alsa-firmware 1.2.4-4
    Firmware binaries for loader programs in alsa-tools and hotplug firmware loader
local/b43-fwcutter 019-6
    firmware extractor for the b43 kernel module
local/edk2-ovmf 202411-1
    Firmware for Virtual Machines (x86_64, i686)
local/fwupd 2.0.12-1
    Simple daemon to allow session software to update firmware
local/gnome-firmware 47.0-2
    Manage firmware on devices supported by fwupd
local/linux-firmware-amdgpu 20250613.12fe085f-7
    Firmware files for Linux - Firmware for AMD Radeon GPUs
local/linux-firmware-whence 20250613.12fe085f-6
    Firmware files for Linux - WHENCE file (vendor licenses)
local/qemu-system-x86-firmware 10.0.0-7
    Firmware for QEMU system emulator for x86
local/sof-firmware 2025.05-1
    Sound Open Firmware

I have download the 20250613…-7 Firmware because of the feedback in Solved thread to AMD 9070 Problem. I would try to reboot now and see if it has fixed the Problem. Or do you want something special from me before?

Ehm… and Sound is dead too.

4

Oh god…
You’ve Frankensteined it.
You know, sometimes there’s a reason that things are like they are in a Linux distribution. That usually involves not creating a Frankenstein version of Garuda Linux

Like… Running two different versions of firmwares and missing the vast majority of them

You should just… Keep things the way they are and not mess with things randomly haha.

To restore your system to a somewhat normal state, you should run

garuda-update base linux-firmware

Let that finish, reboot, and then paste your garuda-inxi again

4 Likes
5

Oh sry :smiley: My bad.

1 Like
6

All good, let’s focus on getting you back on track:

5 Likes
7 
 ╰─λ garuda-inxi
System:
  Kernel: 6.15.3-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 15.1.1
    clocksource: tsc avail: hpet,acpi_pm
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=9bdc1bb8-710e-4a2b-a1fc-d771d79d9fb1 rw rootflags=subvol=@
    quiet splash amd_iommu=on ibt=off
  Desktop: Cinnamon v: 6.4.10 tk: GTK v: 3.24.49 wm: Muffin v: 6.4.1
    tools: cinnamon-screensaver avail: xautolock vt: 7 dm: LightDM v: 1.32.0
    Distro: Garuda base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: CROSSHAIR VI HERO v: Rev 1.xx
    serial: <superuser required> part-nu: SKU UEFI: American Megatrends v: 8801
    date: 08/30/2024
CPU:
  Info: model: AMD Ryzen 9 3900X bits: 64 type: MT MCP arch: Zen 2 gen: 2
    level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
    family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701034
  Topology: cpus: 1x dies: 1 clusters: 1 cores: 12 threads: 24 tpc: 2
    smt: enabled cache: L1: 768 KiB desc: d-12x32 KiB; i-12x32 KiB L2: 6 MiB
    desc: 12x512 KiB L3: 64 MiB desc: 4x16 MiB
  Speed (MHz): avg: 1746 min/max: 563/4674 boost: enabled scaling:
    driver: amd-pstate-epp governor: powersave cores: 1: 1746 2: 1746 3: 1746
    4: 1746 5: 1746 6: 1746 7: 1746 8: 1746 9: 1746 10: 1746 11: 1746 12: 1746
    13: 1746 14: 1746 15: 1746 16: 1746 17: 1746 18: 1746 19: 1746 20: 1746
    21: 1746 22: 1746 23: 1746 24: 1746 bogomips: 182060
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities: <filter>
Graphics:
  Device-1: Advanced Micro Devices [AMD/ATI] Navi 48 [RX 9070/9070 XT]
    vendor: Tul / PowerColor driver: amdgpu v: kernel pcie: gen: 5
    speed: 32 GT/s lanes: 16 ports: active: DP-2,DP-3,HDMI-A-1
    empty: DP-1,Writeback-1 bus-ID: 0d:00.0 chip-ID: 1002:7550 class-ID: 0300
  Device-2: Logitech StreamCam
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-4:2 chip-ID: 046d:0893
    class-ID: 0300 serial: <filter>
  Display: x11 server: X.Org v: 21.1.18 with: Xwayland v: 24.1.8 driver: X:
    loaded: amdgpu unloaded: modesetting alternate: fbdev,vesa dri: radeonsi
    gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 5760x1080 s-dpi: 96 s-size: 1524x285mm (60.00x11.22")
    s-diag: 1550mm (61.04")
  Monitor-1: DP-2 mapped: DisplayPort-1 pos: primary,center
    model: BenQ GL2450H serial: <filter> built: 2015 res: mode: 1920x1080 hz: 60
    scale: 100% (1) dpi: 92 gamma: 1.2 size: 531x298mm (20.91x11.73")
    diag: 609mm (24") ratio: 16:9 modes: max: 1920x1080 min: 720x400
  Monitor-2: DP-3 mapped: DisplayPort-2 pos: right model: Dell SE2422H
    serial: <filter> built: 2022 res: mode: 1920x1080 hz: 60 scale: 100% (1)
    dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  Monitor-3: HDMI-A-1 mapped: HDMI-A-0 pos: left model: Dell SE2422H
    serial: <filter> built: 2022 res: mode: 1920x1080 hz: 60 scale: 100% (1)
    dpi: 93 gamma: 1.2 size: 527x296mm (20.75x11.65") diag: 604mm (23.8")
    ratio: 16:9 modes: max: 1920x1080 min: 720x400
  API: EGL v: 1.5 hw: drv: amd radeonsi platforms: device: 0 drv: radeonsi
    device: 1 drv: swrast gbm: drv: kms_swrast surfaceless: drv: radeonsi x11:
    drv: radeonsi inactive: wayland
  API: OpenGL v: 4.6 compat-v: 4.5 vendor: amd mesa v: 25.1.4-arch1.1
    glx-v: 1.4 direct-render: yes renderer: AMD Radeon RX 9070 (radeonsi
    gfx1201 LLVM 20.1.6 DRM 3.63 6.15.3-zen1-1-zen) device-ID: 1002:7550
    memory: 15.62 GiB unified: no
  API: Vulkan v: 1.4.313 layers: 8 device: 0 type: discrete-gpu name: AMD
    Radeon RX 9070 (RADV GFX1201) driver: mesa radv v: 25.1.4-arch1.1
    device-ID: 1002:7550 surfaces: N/A
  Info: Tools: api: clinfo, eglinfo, glxinfo, vulkaninfo de: kscreen-doctor
    gpu: amd-smi, corectrl, lact x11: xdpyinfo, xprop, xrandr
Audio:
  Device-1: Creative Labs CA0132 Sound Core3D [Sound Blaster Recon3D /
    Z-Series BlasterX AE-5 Plus] driver: snd_hda_intel v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 bus-ID: 08:00.0 chip-ID: 1102:0012 class-ID: 0403
  Device-2: Advanced Micro Devices [AMD/ATI] driver: snd_hda_intel v: kernel
    pcie: gen: 5 speed: 32 GT/s lanes: 16 bus-ID: 0d:00.1 chip-ID: 1002:ab40
    class-ID: 0403
  Device-3: Advanced Micro Devices [AMD] Starship/Matisse HD Audio
    vendor: ASUSTeK driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s
    lanes: 16 bus-ID: 0f:00.4 chip-ID: 1022:1487 class-ID: 0403
  Device-4: RODE Microphones NT-USB driver: hid-generic,snd-usb-audio,usbhid
    type: USB rev: 1.1 speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:2
    chip-ID: 19f7:0003 class-ID: 0300
  Device-5: Logitech StreamCam
    driver: hid-generic,snd-usb-audio,usbhid,uvcvideo type: USB rev: 2.1
    speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 5-4:2 chip-ID: 046d:0893
    class-ID: 0300 serial: <filter>
  API: ALSA v: k6.15.3-zen1-1-zen status: kernel-api with: aoss
    type: oss-emulator tools: N/A
  Server-1: sndiod v: N/A status: off tools: aucat,midicat,sndioctl
  Server-2: PipeWire v: 1.4.5 status: active with: 1: pipewire-pulse
    status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
    4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
  Device-1: Intel I211 Gigabit Network vendor: ASUSTeK driver: igb v: kernel
    pcie: gen: 1 speed: 2.5 GT/s lanes: 1 port: e000 bus-ID: 05:00.0
    chip-ID: 8086:1539 class-ID: 0200
  IF: enp5s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: virbr0 state: down mac: <filter>
  Info: services: NetworkManager, sshd, systemd-timesyncd
Drives:
  Local Storage: total: 2.73 TiB used: 1.55 TiB (56.9%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Samsung model: SSD 980 PRO with
    Heatsink 1TB size: 931.51 GiB block-size: physical: 512 B logical: 512 B
    speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter> fw-rev: 4B2QGXA7
    temp: 37.9 C scheme: GPT
  ID-2: /dev/sda maj-min: 8:0 vendor: Samsung model: SSD 870 QVO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 2B6Q scheme: GPT
  ID-3: /dev/sdb maj-min: 8:16 vendor: Samsung model: SSD 860 EVO 1TB
    size: 931.51 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    tech: SSD serial: <filter> fw-rev: 1B6Q scheme: GPT
Partition:
  ID-1: / raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 753.94 GiB (84.1%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-2: /boot/efi raw-size: 300 MiB size: 299.4 MiB (99.80%)
    used: 616 KiB (0.2%) fs: vfat dev: /dev/sda1 maj-min: 8:1
  ID-3: /home raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 753.94 GiB (84.1%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-4: /var/log raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 753.94 GiB (84.1%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
  ID-5: /var/tmp raw-size: 896.82 GiB size: 896.82 GiB (100.00%)
    used: 753.94 GiB (84.1%) fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
  ID-1: swap-1 type: zram size: 31.25 GiB used: 0 KiB (0.0%) priority: 100
    comp: zstd avail: lzo-rle,lzo,lz4,lz4hc,deflate,842 dev: /dev/zram0
  ID-2: swap-2 type: partition size: 34.39 GiB used: 0 KiB (0.0%)
    priority: -2 dev: /dev/sda3 maj-min: 8:3
Sensors:
  System Temperatures: cpu: 52.0 C mobo: 29.0 C gpu: amdgpu temp: 42.0 C
    mem: 66.0 C
  Fan Speeds (rpm): cpu: 1313 case-1: 0 case-2: 0 case-3: 1128 gpu: amdgpu
    fan: 5
  Power: 12v: 12.29 5v: N/A 3.3v: N/A vbat: 3.18 gpu: amdgpu watts: 14.00
Info:
  Memory: total: 32 GiB available: 31.25 GiB used: 8.7 GiB (27.8%)
  Processes: 563 Power: uptime: 1m states: freeze,mem,disk suspend: deep
    avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
    suspend, test_resume image: 12.48 GiB services: csd-power,upowerd
    Init: systemd v: 257 default: graphical tool: systemctl
  Packages: 2511 pm: pacman pkgs: 2458 libs: 652 tools: octopi,paru,yay
    pm: rpm pkgs: 0 pm: flatpak pkgs: 53 Compilers: clang: 20.1.6 gcc: 15.1.1
    Shell: garuda-inxi default: fish v: 4.0.2 running-in: gnome-terminal
    inxi: 3.3.38
Garuda (2.7.2-1):
  System install date:     2024-01-20
  Last full system update: 2025-06-25
  Is partially upgraded:   No
  Relevant software:       snapper NetworkManager dracut
  Windows dual boot:       Probably (Run as root to verify)
  Failed units:

It is back with all monitor. It has install the Firmware wit -9 now. Yesterday, garuda-update installed it with -6. :smiley:

8

All looks good. Do you have audio working now too?

9

Yes. All is back to normal. What should I do, if I want to use an other firmware to not frankenstein it? I will learn :smiley:

10

Quite frankly: don’t.

Partial upgrades are not supported for a reason!

1 Like
11

I see. So I think restore a snapshot and wait for an official update? If something near happend again?

12

Yes!

3 Likes
13

This topic was automatically closed 2 days after the last reply. New replies are no longer allowed.