Zen core kde garuda

With this kernel it does not wake up from sleep or standby mode. The computer just turned on, and there was a black screen on the monitor, the diodes on the keyboard did not respond to presses. But with a regular Linux kernel it came out of sleep, but when it did, the boot started as if from a switched off state and windows booted from a separate disk. Is it possible to remove the ZEN kernel or do something with sleep mode. I can’t bear to do resets.
Also, the Openrgb program on Linux does not see my hardware, whereas on Windows it does.

System:
Kernel: 6.7.4-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 13.2.1
clocksource: tsc available: hpet,acpi_pm
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux
root=UUID=2e45d363-1ea4-4b68-969e-814870346fc5 rw rootflags=subvol=@
quiet apparmor=1 security=apparmor udev.log_priority=3 iommu=pt
rcu_nocbs=0-3 quiet resume=UUID=6eed4e36-c250-4b1d-9966-84cfd3252615
loglevel=3 clearcpuid=514 quiet apparmor=1 security=apparmor
udev.log_priority=3 iommu=pt rcu_nocbs=0-3 ibt=off
Desktop: KDE Plasma v: 5.27.10 tk: Qt v: 5.15.12 wm: kwin_x11 vt: 2
dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Desktop System: Micro-Star product: MS-7B89 v: 1.0
serial: <superuser required>
Mobo: Micro-Star model: B450M MORTAR MAX (MS-7B89) v: 1.0
serial: <superuser required> UEFI: American Megatrends LLC. v: 2.H0
date: 07/27/2022
CPU:
Info: model: AMD Ryzen 5 3600 bits: 64 type: MT MCP arch: Zen 2 gen: 3
level: v3 note: check built: 2020-22 process: TSMC n7 (7nm)
family: 0x17 (23) model-id: 0x71 (113) stepping: 0 microcode: 0x8701021
Topology: cpus: 1x cores: 6 tpc: 2 threads: 12 smt: enabled cache:
L1: 384 KiB desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB
L3: 32 MiB desc: 2x16 MiB
Speed (MHz): avg: 3633 high: 3948 min/max: 2200/4208 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 3600 2: 3600
3: 3600 4: 3600 5: 3642 6: 3599 7: 3600 8: 3600 9: 3948 10: 3580 11: 3600
12: 3635 bogomips: 86435
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities: <filter>
Graphics:
Device-1: NVIDIA TU106 [GeForce RTX 2060 SUPER] vendor: ASUSTeK
driver: nvidia v: 545.29.06 alternate: nouveau,nvidia_drm non-free: 545.xx+
status: current (as of 2023-10; EOL~2026-12-xx) arch: Turing code: TUxxx
process: TSMC 12nm FF built: 2018-2022 pcie: gen: 3 speed: 8 GT/s
lanes: 16 ports: active: none off: HDMI-A-2 empty: DP-1, DP-2, HDMI-A-1,
Unknown-2 bus-ID: 26:00.0 chip-ID: 10de:1f47 class-ID: 0300
Display: x11 server: X.Org v: 21.1.11 with: Xwayland v: 23.2.4
compositor: kwin_x11 driver: X: loaded: nvidia unloaded: modesetting,nouveau
alternate: fbdev,nv,vesa gpu: nvidia,nvidia-nvswitch display-ID: :0
screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 101 s-size: 483x272mm (19.02x10.71")
s-diag: 554mm (21.82")
Monitor-1: HDMI-A-2 mapped: HDMI-1 note: disabled model: Asus ML229
serial: <filter> built: 2012 res: 1920x1080 hz: 60 dpi: 103 gamma: 1.2
size: 475x267mm (18.7x10.51") diag: 545mm (21.5") ratio: 16:9 modes:
max: 1920x1080 min: 640x480
API: EGL v: 1.5 hw: drv: nvidia platforms: device: 0 drv: nvidia device: 2
drv: swrast gbm: drv: nvidia surfaceless: drv: nvidia x11: drv: nvidia
inactive: wayland,device-1
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 545.29.06
glx-v: 1.4 direct-render: yes renderer: NVIDIA GeForce RTX 2060
SUPER/PCIe/SSE2 memory: 7.81 GiB
API: Vulkan v: 1.3.276 layers: 14 device: 0 type: discrete-gpu name: NVIDIA
GeForce RTX 2060 SUPER driver: nvidia v: 545.29.06 device-ID: 10de:1f47
surfaces: xcb,xlib device: 1 type: cpu name: llvmpipe (LLVM 16.0.6 256
bits) driver: mesa llvmpipe v: 23.3.5-arch1.1 (LLVM 16.0.6)
device-ID: 10005:0000 surfaces: xcb,xlib
Audio:
Device-1: NVIDIA TU106 High Definition Audio vendor: ASUSTeK
driver: snd_hda_intel v: kernel pcie: gen: 3 speed: 8 GT/s lanes: 16
bus-ID: 26:00.1 chip-ID: 10de:10f9 class-ID: 0403
Device-2: AMD Starship/Matisse HD Audio vendor: Micro-Star MSI
driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
bus-ID: 28:00.4 chip-ID: 1022:1487 class-ID: 0403
Device-3: Kingston HyperX 7.1 Audio
driver: hid-generic,snd-usb-audio,usbhid type: USB rev: 2.0 speed: 12 Mb/s
lanes: 1 mode: 1.1 bus-ID: 1-1:2 chip-ID: 0951:16a4 class-ID: 0300
serial: <filter>
API: ALSA v: k6.7.4-arch1-1 status: kernel-api with: aoss
type: oss-emulator tools: N/A
Server-1: PipeWire v: 1.0.3 status: active with: 1: pipewire-pulse
status: active 2: wireplumber status: active 3: pipewire-alsa type: plugin
4: pw-jack type: plugin tools: pactl,pw-cat,pw-cli,wpctl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Micro-Star MSI RTL8111/8168/8411 driver: r8169 v: kernel pcie:
gen: 1 speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 22:00.0
chip-ID: 10ec:8168 class-ID: 0200
IF: enp34s0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:
Local Storage: total: 1.47 TiB used: 376.53 GiB (25.0%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: AMD Radeon model: R5MP120G8
size: 111.79 GiB block-size: physical: 512 B logical: 512 B speed: 31.6 Gb/s
lanes: 4 tech: SSD serial: <filter> fw-rev: T1103F0L temp: 45.9 C
scheme: GPT
ID-2: /dev/nvme1n1 maj-min: 259:5 vendor: Western Digital
model: WD BLACK SN750 SE 500GB size: 465.76 GiB block-size: physical: 512 B
logical: 512 B speed: 63.2 Gb/s lanes: 4 tech: SSD serial: <filter>
fw-rev: 711250WD temp: 40.9 C scheme: GPT
ID-3: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10EZEX-75WN4A0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 7200 serial: <filter>
fw-rev: 1A01 scheme: GPT
Partition:
ID-1: / raw-size: 58.59 GiB size: 58.59 GiB (100.00%) used: 19 GiB (32.4%)
fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:7
ID-2: /boot/efi raw-size: 1001 MiB size: 999 MiB (99.80%)
used: 584 KiB (0.1%) fs: vfat dev: /dev/nvme1n1p1 maj-min: 259:6
ID-3: /home raw-size: 390.57 GiB size: 390.57 GiB (100.00%)
used: 357.53 GiB (91.5%) fs: btrfs dev: /dev/nvme1n1p4 maj-min: 259:9
ID-4: /var/log raw-size: 58.59 GiB size: 58.59 GiB (100.00%)
used: 19 GiB (32.4%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:7
ID-5: /var/tmp raw-size: 58.59 GiB size: 58.59 GiB (100.00%)
used: 19 GiB (32.4%) fs: btrfs dev: /dev/nvme1n1p2 maj-min: 259:7
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 15.62 GiB used: 0 KiB (0.0%)
priority: -2 dev: /dev/nvme1n1p3 maj-min: 259:8
ID-2: swap-2 type: zram size: 15.54 GiB used: 0 KiB (0.0%) priority: 100
comp: zstd avail: lzo,lzo-rle,lz4,lz4hc,842 max-streams: 12 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 47.8 C mobo: N/A gpu: nvidia temp: 50 C
Fan Speeds (rpm): N/A gpu: nvidia fan: 0%
Info:
Processes: 426 Uptime: 40m wakeups: 0 Memory: total: 16 GiB
available: 15.54 GiB used: 4.36 GiB (28.0%) Init: systemd v: 255
default: graphical tool: systemctl Compilers: gcc: 13.2.1 clang: 16.0.6
Packages: 1909 pm: pacman pkgs: 1903 libs: 560 tools: octopi,pamac,paru
pm: flatpak pkgs: 6 Shell: fish v: 3.7.0 running-in: konsole inxi: 3.3.31
Garuda (2.6.23-1):
System install date:     2024-02-02
Last full system update: 2024-02-11
Is partially upgraded:   No
Relevant software:       snapper NetworkManager dracut nvidia-dkms
Windows dual boot:       Probably (Run as root to verify)
Failed units:

Install other kernel and remove the zen kernel. eg

sudo pacman -S linux-lts linux-lts-headers 

reboot

sudo pacman -R linux-zen linux-zen-headers
5 Likes

ok, we’ll do that, I was afraid I’d break something. And then I started reading that you can write something in the kernel so that everything becomes normal. And it’s so simple. Thank you

You’re replacing one kernel with another, then booting into the new one. That’s all. :slight_smile:

Don’t trust what you read unless you verify it. :smiley:

6 Likes

This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.