Hello!
Heres my output of garuda-inxi
System:
Kernel: 5.16.8-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=5afc8f6d-ae4d-45a8-9782-af969ea8b014 rw rootflags=subvol=@
quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
systemd.unified_cgroup_hierarchy=1 loglevel=3
Desktop: KDE Plasma 5.24.0 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11
vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
Type: Laptop System: HP product: HP Laptop 15s-ey1xxx v: N/A
serial: <superuser required> Chassis: type: 10 serial: <superuser required>
Mobo: HP model: 8707 v: 37.21 serial: <superuser required> UEFI: AMI
v: F.52 date: 09/22/2021
Battery:
ID-1: BAT0 charge: 31.2 Wh (82.8%) condition: 37.7/37.7 Wh (100.0%)
volts: 12.1 min: 11.3 model: Hewlett-Packard Primary type: Li-ion
serial: N/A status: Discharging cycles: 339
CPU:
Info: model: AMD Ryzen 5 4500U with Radeon Graphics bits: 64 type: MCP
arch: Zen 2 family: 0x17 (23) model-id: 0x60 (96) stepping: 1
microcode: 0x8600106
Topology: cpus: 1x cores: 6 smt: <unsupported> cache: L1: 384 KiB
desc: d-6x32 KiB; i-6x32 KiB L2: 3 MiB desc: 6x512 KiB L3: 8 MiB
desc: 2x4 MiB
Speed (MHz): avg: 1409 high: 1485 min/max: 1400/2375 boost: enabled
scaling: driver: acpi-cpufreq governor: performance cores: 1: 1387 2: 1485
3: 1396 4: 1397 5: 1397 6: 1397 bogomips: 28445
Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
Vulnerabilities:
Type: itlb_multihit status: Not affected
Type: l1tf status: Not affected
Type: mds status: Not affected
Type: meltdown status: Not affected
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl
Type: spectre_v1
mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full AMD retpoline, IBPB: conditional,
IBRS_FW, STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics:
Device-1: AMD Renoir vendor: Hewlett-Packard driver: amdgpu v: kernel
bus-ID: 03:00.0 chip-ID: 1002:1636 class-ID: 0300
Device-2: Luxvisions Innotech Limited HP TrueVision HD Camera type: USB
driver: uvcvideo bus-ID: 1-3:3 chip-ID: 30c9:0035 class-ID: fe01
serial: <filter>
Display: x11 server: X.Org 1.21.1.3 compositor: kwin_x11 driver:
loaded: amdgpu,ati unloaded: modesetting alternate: fbdev,vesa
display-ID: :0 screens: 1
Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.0x11.2")
s-diag: 582mm (22.9")
Monitor-1: eDP res: 1920x1080 hz: 60 dpi: 142 size: 344x194mm (13.5x7.6")
diag: 395mm (15.5")
OpenGL: renderer: AMD RENOIR (DRM 3.44.0 5.16.8-zen1-1-zen LLVM 13.0.0)
v: 4.6 Mesa 21.3.5 direct render: Yes
Audio:
Device-1: AMD Renoir Radeon High Definition Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 03:00.1 chip-ID: 1002:1637
class-ID: 0403
Device-2: AMD Raven/Raven2/FireFlight/Renoir Audio Processor
vendor: Hewlett-Packard driver: snd_rn_pci_acp3x v: kernel
alternate: snd_pci_acp3x,snd_pci_acp5x,snd_pci_acp6x bus-ID: 03:00.5
chip-ID: 1022:15e2 class-ID: 0480
Device-3: AMD Family 17h HD Audio vendor: Hewlett-Packard
driver: snd_hda_intel v: kernel bus-ID: 03:00.6 chip-ID: 1022:15e3
class-ID: 0403
Sound Server-1: ALSA v: k5.16.8-zen1-1-zen running: yes
Sound Server-2: PulseAudio v: 15.0 running: no
Sound Server-3: PipeWire v: 0.3.45 running: yes
Network:
Device-1: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter
vendor: Hewlett-Packard driver: rtw_8821ce v: N/A modules: rtw88_8821ce
port: f000 bus-ID: 01:00.0 chip-ID: 10ec:c821 class-ID: 0280
IF: wlo1 state: down mac: <filter>
IF-ID-1: br10 state: down mac: <filter>
IF-ID-2: enp3s0f4u2 state: unknown speed: -1 duplex: half mac: <filter>
IF-ID-3: virbr0 state: down mac: <filter>
Bluetooth:
Device-1: Realtek Realtek Bluetooth 4.2 Adapter type: USB driver: btusb
v: 0.8 bus-ID: 1-4:4 chip-ID: 0bda:b00a class-ID: e001 serial: <filter>
Report: bt-adapter ID: hci0 rfk-id: 0 state: down
bt-service: enabled,running rfk-block: hardware: no software: no
address: <filter>
Device-2: Google Nexus/Pixel Device (charging + debug) type: USB
driver: rndis_host v: kernel bus-ID: 3-2:3 chip-ID: 18d1:4ee7
class-ID: 0a00 serial: <filter>
Drives:
Local Storage: total: 238.47 GiB used: 111.27 GiB (46.7%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/nvme0n1 maj-min: 259:0 vendor: Toshiba
model: KBG40ZNV256G KIOXIA size: 238.47 GiB block-size: physical: 512 B
logical: 512 B speed: 31.6 Gb/s lanes: 4 type: SSD serial: <filter>
rev: HP00AE00 temp: 29.9 C scheme: GPT
Partition:
ID-1: / raw-size: 129.9 GiB size: 129.9 GiB (100.00%)
used: 111.18 GiB (85.6%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:4
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.46%)
used: 85.1 MiB (33.2%) fs: vfat dev: /dev/nvme0n1p1 maj-min: 259:1
ID-3: /home raw-size: 129.9 GiB size: 129.9 GiB (100.00%)
used: 111.18 GiB (85.6%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:4
ID-4: /var/log raw-size: 129.9 GiB size: 129.9 GiB (100.00%)
used: 111.18 GiB (85.6%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:4
ID-5: /var/tmp raw-size: 129.9 GiB size: 129.9 GiB (100.00%)
used: 111.18 GiB (85.6%) fs: btrfs dev: /dev/nvme0n1p4 maj-min: 259:4
Swap:
Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 7.19 GiB used: 446.8 MiB (6.1%)
priority: 100 dev: /dev/zram0
Sensors:
System Temperatures: cpu: 43.0 C mobo: N/A gpu: amdgpu temp: 43.0 C
Fan Speeds (RPM): cpu: 0 fan-2: 0
Info:
Processes: 276 Uptime: 29m wakeups: 1045 Memory: 7.2 GiB
used: 3.05 GiB (42.4%) Init: systemd v: 250 tool: systemctl Compilers:
gcc: 11.1.0 clang: 13.0.1 Packages: 1956 apt: 0 pacman: 1948 lib: 491
flatpak: 8 Shell: fish v: 3.3.1 default: Bash v: 5.1.16 running-in: konsole
inxi: 3.3.12
Garuda (2.5.4-2):
System install date: 2021-10-19
Last full system update: 2022-02-13
Is partially upgraded: Yes
Relevant software: NetworkManager
Windows dual boot: Probably (Run as root to verify)
Snapshots: Snapper
Failed units:
So I was trying to make android apps using kivy library in python. I was following this tutorial.
I used following code
from kivy.app import App
from kivy.uix.label import Label
class MainApp(App):
def build(self):
label = Label(text='Hello from Kivy',
size_hint=(.5, .5),
pos_hint={'center_x': .5, 'center_y': .5})
return label
if __name__ == '__main__':
app = MainApp()
app.run()
and when i executed this code using python, it worked perfectly but, somehow it stopped my wobbly windows feature. but when i close kivy window. it wobbly windows started working again. can anyone help with this? I don't want wobbly windows to stop while doing anything.