Hardik
26 October 2021 01:26
1
Hello.
CPU: Info: Quad Core model: Intel Core i5-2300 bits: 64 type: MCP arch: Sandy Bridge
family: 6 model-id: 2A (42) stepping: 7 microcode: 2F cache: L2: 6 MiB
bogomips: 22350
Speed: 2174 MHz min/max: 1600/3100 MHz Core speeds (MHz): 1: 2174 2: 2959 3: 2990
4: 2993
Flags: acpi aes aperfmperf apic arat arch_perfmon avx bts clflush cmov constant_tsc
cpuid cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept est flexpriority flush_l1d fpu
fxsr ht ibpb ibrs ida lahf_lm lm mca mce md_clear mmx monitor msr mtrr nonstop_tsc
nopl nx pae pat pbe pcid pclmulqdq pdcm pebs pge pln pni popcnt pse pse36 pti pts
rdtscp rep_good sep ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall tm tm2 tpr_shadow
tsc tsc_deadline_timer vme vmx vnmi vpid xsave xsaveopt xtopology xtpr
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
I can't seem to understand why is this problem occuring. I have installed pamac though which works perfectly fine for installing softwares but i still want to explore and find out more about linux so i want to resolve this error. I have attempted nothing because i new to linux.
SGS
26 October 2021 07:52
2
Please, post full in and output from inxi -Faz.
As always, use pamac, octopi for searching and install and update with pacman.
2 Likes
filo
26 October 2021 08:00
3
If the problem is how to install from AUR in Octopi, give a look at this one:
You need to install one of these:
pacaur: for AUR support
pikaur: for AUR support
trizen: for AUR support
yay: for AUR support
3 Likes
Try octopi-dev. The stable package is still in version 0.11, which doesn't have the added support. Version 0.12 should also work with paru (default for us) or any of the other helpers.
3 Likes
Hardik
31 October 2021 04:37
5
My inxi -Faz output
System: Kernel: 5.14.14-zen1-1-zen x86_64 bits: 64 compiler: gcc v: 11.1.0
parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
root=UUID=e699ef1b-073f-4b56-a22a-2eac49a0fcc8 rw [email protected] quiet splash
rd.udev.log_priority=3 vt.global_cursor_default=0 systemd.unified_cgroup_hierarchy=1
resume=UUID=cb3e1c83-a445-4cba-9567-c1a47cebf5df loglevel=3
Desktop: KDE Plasma 5.23.2 tk: Qt 5.15.2 info: latte-dock wm: kwin_x11 vt: 1 dm: SDDM
Distro: Garuda Linux base: Arch Linux
Machine: Type: Desktop System: Dell product: OptiPlex 790 v: 01 serial: <filter> Chassis:
type: 15 serial: <filter>
Mobo: Dell model: 0D28YY v: A02 serial: <filter> UEFI: Dell v: A22 date: 07/03/2018
CPU: Info: Quad Core model: Intel Core i5-2300 bits: 64 type: MCP arch: Sandy Bridge
family: 6 model-id: 2A (42) stepping: 7 microcode: 2F cache: L2: 6 MiB
flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 22348
Speed: 1888 MHz min/max: 1600/3100 MHz Core speeds (MHz): 1: 1888 2: 2607 3: 1955
4: 2827
Vulnerabilities: Type: itlb_multihit status: KVM: VMX disabled
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT disabled
Type: mds mitigation: Clear CPU buffers; SMT disabled
Type: meltdown mitigation: PTI
Type: spec_store_bypass
mitigation: Speculative Store Bypass disabled via prctl and seccomp
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer sanitization
Type: spectre_v2 mitigation: Full generic retpoline, IBPB: conditional, IBRS_FW,
STIBP: disabled, RSB filling
Type: srbds status: Not affected
Type: tsx_async_abort status: Not affected
Graphics: Device-1: Intel 2nd Generation Core Processor Family Integrated Graphics vendor: Dell
driver: i915 v: kernel bus-ID: 00:02.0 chip-ID: 8086:0102 class-ID: 0300
Device-2: Jieli USB PHY 2.0 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 2-1.6:6
chip-ID: 1224:2a25 class-ID: 0102
Display: x11 server: X.Org 1.20.13 compositor: kwin_x11 driver: loaded: intel
unloaded: modesetting alternate: fbdev,vesa display-ID: :0 screens: 1
Screen-1: 0 s-res: 1366x768 s-dpi: 96 s-size: 361x203mm (14.2x8.0")
s-diag: 414mm (16.3")
Monitor-1: VGA1 res: 1366x768 hz: 60 dpi: 85 size: 410x230mm (16.1x9.1")
diag: 470mm (18.5")
OpenGL: renderer: Mesa DRI Intel HD Graphics 2000 (SNB GT1) v: 3.3 Mesa 21.2.4
compat-v: 3.0 direct render: Yes
Audio: Device-1: Intel 6 Series/C200 Series Family High Definition Audio vendor: Dell
driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:1c20 class-ID: 0403
Device-2: Jieli USB PHY 2.0 type: USB driver: snd-usb-audio,uvcvideo bus-ID: 2-1.6:6
chip-ID: 1224:2a25 class-ID: 0102
Sound Server-1: ALSA v: k5.14.14-zen1-1-zen running: yes
Sound Server-2: JACK v: 1.9.19 running: no
Sound Server-3: PulseAudio v: 15.0 running: no
Sound Server-4: PipeWire v: 0.3.39 running: yes
Network: Device-1: Intel 82579LM Gigabit Network vendor: Dell driver: e1000e v: kernel
port: 3080 bus-ID: 00:19.0 chip-ID: 8086:1502 class-ID: 0200
IF: eno1 state: down mac: <filter>
Device-2: Ralink MT7601U Wireless Adapter type: USB driver: mt7601u bus-ID: 2-1.3:5
chip-ID: 148f:7601 class-ID: 0000 serial: <filter>
IF: wlp0s29u1u3 state: up mac: <filter>
IF-ID-1: anbox0 state: down mac: <filter>
Drives: Local Storage: total: 931.52 GiB used: 21.38 GiB (2.3%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST3500312CS size: 465.76 GiB
block-size: physical: 512 B logical: 512 B speed: 1.5 Gb/s type: HDD rpm: 5900
serial: <filter> rev: SC13 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 type: USB model: Mass Storage Device size: 465.76 GiB
block-size: physical: 512 B logical: 512 B type: N/A serial: <filter> scheme: GPT
Partition: ID-1: / raw-size: 457.33 GiB size: 457.33 GiB (100.00%) used: 21.38 GiB (4.7%)
fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.45%) used: 562 KiB (0.2%)
fs: vfat dev: /dev/sda1 maj-min: 8:1
ID-3: /home raw-size: 457.33 GiB size: 457.33 GiB (100.00%) used: 21.38 GiB (4.7%)
fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-4: /var/log raw-size: 457.33 GiB size: 457.33 GiB (100.00%) used: 21.38 GiB (4.7%)
fs: btrfs dev: /dev/sda2 maj-min: 8:2
ID-5: /var/tmp raw-size: 457.33 GiB size: 457.33 GiB (100.00%) used: 21.38 GiB (4.7%)
fs: btrfs dev: /dev/sda2 maj-min: 8:2
Swap: Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
ID-1: swap-1 type: zram size: 3.71 GiB used: 92 MiB (2.4%) priority: 100
dev: /dev/zram0
ID-2: swap-2 type: partition size: 8.17 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3
Sensors: System Temperatures: cpu: 38.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 229 Uptime: 4m wakeups: 0 Memory: 3.71 GiB used: 2.3 GiB (62.1%)
Init: systemd v: 249 tool: systemctl Compilers: gcc: 11.1.0 clang: 12.0.1 Packages:
pacman: 1810 lib: 470 Shell: fish v: 3.3.1 default: Bash v: 5.1.8
running-in: alacritty inxi: 3.3.08
when i start octopi from terminal this happens
Icon theme "gnome" not found.
Really? sudo pacman -S gnome-icon-theme
1 Like
Hardik
1 November 2021 04:43
7
Now after running /usr/bin/octopi
qt.xkb.compose: failed to create compose table
system
15 November 2021 04:43
8
This topic was automatically closed 14 days after the last reply. New replies are no longer allowed.
