Store for appimages

Hello. I can't find a better category to suggest a new store for appimages (the suggestion topics are locked for some reason(?)), in any case I found AppImage Pool that might be handy to install appimages, and it might be added near the app for appimage settings.

Post your terminal/konsole in- and output as text (no pictures) from:

System:
  Kernel: 5.17.1-zen1-1-zen arch: x86_64 bits: 64 compiler: gcc v: 11.2.0
    parameters: BOOT_IMAGE=/@/boot/vmlinuz-linux-zen
    root=UUID=c225b4b5-552f-4d1d-9325-180e06de7ec0 rw [email protected]
    quiet splash rd.udev.log_priority=3 vt.global_cursor_default=0
    systemd.unified_cgroup_hierarchy=1 loglevel=3 mitigations=off
    sysrq_always_enabled=1 nowatchdog
  Desktop: KDE Plasma v: 5.24.4 tk: Qt v: 5.15.3 info: latte-dock
    wm: kwin_x11 vt: 1 dm: SDDM Distro: Garuda Linux base: Arch Linux
Machine:
  Type: Desktop System: ASUS product: N/A v: N/A serial: <superuser required>
  Mobo: ASUSTeK model: PRIME B450M-A II v: Rev X.0x
    serial: <superuser required> UEFI: American Megatrends v: 3211
    date: 08/10/2021
CPU:
  Info: model: AMD Ryzen 7 5800X bits: 64 type: MT MCP arch: Zen 3
    family: 0x19 (25) model-id: 0x21 (33) stepping: 0 microcode: 0xA201016
  Topology: cpus: 1x cores: 8 tpc: 2 threads: 16 smt: enabled cache:
    L1: 512 KiB desc: d-8x32 KiB; i-8x32 KiB L2: 4 MiB desc: 8x512 KiB
    L3: 32 MiB desc: 1x32 MiB
  Speed (MHz): avg: 4198 high: 4200 min/max: 2200/5361 boost: enabled
    scaling: driver: acpi-cpufreq governor: ondemand cores: 1: 4198 2: 4198
    3: 4199 4: 4199 5: 4199 6: 4199 7: 4200 8: 4198 9: 4197 10: 4197 11: 4198
    12: 4198 13: 4199 14: 4198 15: 4199 16: 4198 bogomips: 134389
  Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm
  Vulnerabilities:
  Type: itlb_multihit status: Not affected
  Type: l1tf status: Not affected
  Type: mds status: Not affected
  Type: meltdown status: Not affected
  Type: spec_store_bypass status: Vulnerable
  Type: spectre_v1 status: Vulnerable: __user pointer sanitization and
    usercopy barriers only; no swapgs barriers
  Type: spectre_v2 status: Vulnerable, IBPB: disabled, STIBP: disabled
  Type: srbds status: Not affected
  Type: tsx_async_abort status: Not affected
Graphics:
  Device-1: AMD Ellesmere [Radeon RX 470/480/570/570X/580/580X/590]
    vendor: PC Partner / Sapphire driver: amdgpu v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 ports: active: DP-2
    empty: DP-1, DVI-D-1, HDMI-A-1, HDMI-A-2 bus-ID: 08:00.0
    chip-ID: 1002:67df class-ID: 0300
  Display: x11 server: X.Org v: 1.21.1.3 with: Xwayland v: 22.1.1
    compositor: kwin_x11 driver: X: loaded: amdgpu unloaded: modesetting
    alternate: fbdev,vesa gpu: amdgpu display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96 s-size: 508x285mm (20.00x11.22")
    s-diag: 582mm (22.93")
  Monitor-1: DP-2 mapped: DisplayPort-1 model: Philips PHL 273V7
    serial: <filter> built: 2021 res: 1920x1080 hz: 60 dpi: 82 gamma: 1.2
    size: 598x336mm (23.54x13.23") diag: 686mm (27") ratio: 16:9 modes:
    max: 1920x1080 min: 720x400
  OpenGL: renderer: AMD Radeon RX 480 Graphics (polaris10 LLVM 13.0.1 DRM
    3.44 5.17.1-zen1-1-zen)
    v: 4.6 Mesa 22.0.1 direct render: Yes
Audio:
  Device-1: AMD Ellesmere HDMI Audio [Radeon RX 470/480 / 570/580/590]
    vendor: PC Partner / Sapphire driver: snd_hda_intel v: kernel pcie: gen: 3
    speed: 8 GT/s lanes: 16 bus-ID: 08:00.1 chip-ID: 1002:aaf0 class-ID: 0403
  Device-2: AMD Starship/Matisse HD Audio vendor: ASUSTeK
    driver: snd_hda_intel v: kernel pcie: gen: 4 speed: 16 GT/s lanes: 16
    bus-ID: 0a:00.4 chip-ID: 1022:1487 class-ID: 0403
  Sound Server-1: ALSA v: k5.17.1-zen1-1-zen running: yes
  Sound Server-2: PulseAudio v: 15.0 running: no
  Sound Server-3: PipeWire v: 0.3.49 running: yes
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
    vendor: ASUSTeK PRIME B450M-A driver: r8169 v: kernel pcie: gen: 1
    speed: 2.5 GT/s lanes: 1 port: f000 bus-ID: 07:00.0 chip-ID: 10ec:8168
    class-ID: 0200
  IF: enp7s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
  IF-ID-1: anbox0 state: down mac: <filter>
  IF-ID-2: virbr0 state: down mac: <filter>
Drives:
  Local Storage: total: 8.44 TiB used: 4.2 TiB (49.8%)
  SMART Message: Unable to run smartctl. Root privileges required.
  ID-1: /dev/sda maj-min: 8:0 vendor: Seagate model: ST1000DM010-2EP102
    size: 931.51 GiB block-size: physical: 4096 B logical: 512 B
    speed: 6.0 Gb/s type: HDD rpm: 7200 serial: <filter> rev: CC43
    scheme: GPT
  ID-2: /dev/sdb maj-min: 8:16 vendor: Intenso model: SSD Sata III
    size: 111.79 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
    type: SSD serial: <filter> rev: 9B0 scheme: GPT
  ID-3: /dev/sdc maj-min: 8:32 vendor: Seagate model: ST3160815AS
    size: 149.01 GiB block-size: physical: 512 B logical: 512 B speed: 3.0 Gb/s
    type: N/A serial: <filter> rev: A scheme: MBR
  ID-4: /dev/sdd maj-min: 8:48 type: USB vendor: Seagate
    model: Backup+ Hub BK size: 7.28 TiB block-size: physical: 4096 B
    logical: 512 B type: N/A serial: <filter> rev: D781 scheme: GPT
Partition:
  ID-1: / raw-size: 111.53 GiB size: 111.53 GiB (100.00%)
    used: 86.28 GiB (77.4%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
  ID-2: /boot/efi raw-size: 260 MiB size: 256 MiB (98.45%)
    used: 563 KiB (0.2%) fs: vfat dev: /dev/sdb1 maj-min: 8:17
  ID-3: /home raw-size: 111.53 GiB size: 111.53 GiB (100.00%)
    used: 86.28 GiB (77.4%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
  ID-4: /var/log raw-size: 111.53 GiB size: 111.53 GiB (100.00%)
    used: 86.28 GiB (77.4%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
  ID-5: /var/tmp raw-size: 111.53 GiB size: 111.53 GiB (100.00%)
    used: 86.28 GiB (77.4%) fs: btrfs dev: /dev/sdb2 maj-min: 8:18
Swap:
  Kernel: swappiness: 133 (default 60) cache-pressure: 100 (default)
  ID-1: swap-1 type: zram size: 15.59 GiB used: 7.2 MiB (0.0%)
    priority: 100 dev: /dev/zram0
Sensors:
  System Temperatures: cpu: N/A mobo: N/A gpu: amdgpu temp: 50.0 C
  Fan Speeds (RPM): N/A gpu: amdgpu fan: 939
Info:
  Processes: 464 Uptime: 1h 22m wakeups: 0 Memory: 15.59 GiB
  used: 4.79 GiB (30.7%) Init: systemd v: 250 tool: systemctl Compilers:
  gcc: 11.2.0 clang: 13.0.1 Packages: 2170 pacman: 2149 lib: 542 flatpak: 21
  Shell: Bash v: 5.1.16 running-in: konsole inxi: 3.3.15
Garuda (2.6.1-1):
  System install date:     2022-03-23
  Last full system update: 2022-04-09
  Is partially upgraded:   No
  Relevant software:       NetworkManager
  Windows dual boot:       Probably (Run as root to verify)
  Snapshots:               Snapper
  Failed units:            systemd-networkd-wait-online.service 


Without it, you will not receive any help from the Garuda team or your topic is likely to be closed without notice.

Before you open a new help request, read relevant sections of the Arch and Garuda wiki.
Thoroughly search your issue and any error messages in the forum and on the web.

Report everything you have already attempted to solve your problem.

We use pacman, yay, paru, octopi, pacseek.

What is and where you found AppImage Pool?

Please, clean your post from template text.

???

1 Like

Looks like a store for AppImages. Is there a need for such a thing? (aka is there something you can install only as an AppImage?)

1 Like

Same like GithubDesktop or GitKraken?

"Behold! AppImages are usually not verified by others. Follow these instructions only if you trust the developer of the software. Use at your own risk!"

Ok , I am out :slight_smile:

4 Likes

Just a word of caution with appimages. They depend on Fuse 2. Right now as distros continue moving to Fuse 3; you might end up with your appimages no longer working.